Tascam DR701d Audio Field recorder
Owned by Patrick B
Usually responds within a few minutes
100% response rate
Otley & Yeadon 3423.9 mi
Fat Llama covers damages up to £25,000 per item Read more
Information
Tascam DR701d Audio Field recorder. Excellent sound quality, the Preamps on this are superb. Can be powered from 4xAA, a USB battery pack Perfect working order. Will come with a case for transport. The DR-701D is Tascam’s flagship audio recorder for one-shot video production. It includes a timecode input and a timecode generator for easy synchronization with a SMPTE generator, camera, or smart slate. The HDMI in and out allows a DSLR camera to start recording on both devices, and video clock prevents drift between sound and picture. Four mic signals can be individually recorded and mixed to a stereo channel, for a total of six recording channels. For additional channels, multiple units can be cascaded together. The lightweight yet rigid chassis is forged from magnesium alloy. Tripod mounts on the top and bottom allow the unit to mount under a camera, attach to a follow-focus cage, or be used stand-alone. Designed for the needs of professional filmmakers, television producers, advertisers, and documentarians, the DR-701D packs high-quality multitrack recording into a package compact enough for use with any camera. Perfect camera sync using HDMI video clock synchronization An HDMI input and output allows the DR-701D's internal clock and the camera to be digitally synchronized. Even when shooting long events, the video files recorded by the camera and audio files recorded by the DR-701D will not drift out of sync. One button press on the camera starts sound recording on the DR-701D Simply pressing the camera recording start button sends a trigger to the DR-701D to start audio recording. Unlike other systems that force you to press record on both devices, the HDMI start system prevents missed takes, syncs the two recording starts together, and makes single-operator shoots much easier. Note: This feature is dependant on camera firmware, see compatibility chart below. Tascam DR-701DCascade feature for additional track recording By connecting multiple units using HDMI, slave DR-701D units can be made to follow a master unit to start and stop recording simultaneously. Since audio can also be output through the HDMI connection, monitoring selections can be made using slave units without reconnecting headphones. Tascam DR-701DSMPTE timecode stores time data in recorded audio files The built-in SMPTE generator allows the camera and DR-701D to store the same time reference. Several options are available to integrate SMPTE LTC into your camera system. The BNC timecode input can follow a source signal, or can be "jam-synced" a few times per day for independant freewheel operation. Cameras that send timecode through their HDMI output can be followed by the DR-701D's timecode input. And the internal generator can be started without an external reference for a simple time-of-day stamp on recorded BWF files. Recording media SD card (64 MB − 2 GB) SDHC card (4–32 GB) SDXC card (48–128 GB) Recording and playback formats WAV: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz, 16/24 bit BWF: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz, 16/24 bit Number of input channels 4 maximum (44.1/48/96 kHz) 2 maximum (192 kHz) Number of recording channels 6 maximum (44.1/48/96 kHz) 2 maximum (192 kHz) Analogue audio inputs and outputs IN 1–4 combo jacks XLR-3-31 (1: GND, 2: HOT, 3: COLD) (XLR jacks can provide phantom power) 6.3-mm standard TRS jacks (Tip = HOT, Ring = COLD, Sleeve = GND) Input gain set to LOW, MID, HI or HI+ Input impedance 2 kΩ Phantom Power 48 V ±4 V (10 mA/channel) or 24 V ±4 V (10 mA/channel) Maximum input level +4 dBu Minimum input level –72 dBu Mic input gain (input level knob at maximum) LOW: +20 dB MID: +40 dB HI: +52 dB HI+: +64 dB Input gain set to LINE Input impedance 10 kΩ or higher Nominal input level +4 dBu Maximum input level +24 dBu Additional input (EXT IN 1/2) 3.5-mm stereo mini jack (can provide plug-in power) Input impedance 10 kΩ Maximum input level +10 dBV Minimum input level −50 dBV Mic input gain (input level knob at maximum) LOW: +3 dB MID: +11 dB HI: +26 dB HI+: +38 dB Camera input 3.5-mm stereo mini jack Input impedance 10 kΩ Nominal input level –10 dBV Maximum input level +6 dBV Headphones output (PHONES) 3.5-mm stereo mini jack Maximum output power 50 mW + 50 mW Camera output 3.5-mm stereo mini jack Output impedance 200 Ω Nominal output level –44 dBV Maximum output level +6 dBV Notes: The maximum input level is the level that the input knob can be adjusted and a digital full-scale (0 dBFS) signal can be input without distorting. The minimum input level is the level that the input knob can be adjusted and a −20 dBFS signal can be input. Line output (LINE OUT) 3.5-mm stereo mini jack Output impedance 200 Ω Nominal output level –14 dBV Maximum output level +6 dBV Other inputs and outputs HDMI input/output (HDMI IN/OUT) Type-A receptacle USB connector Micro-B connector Format USB 2.0 High Speed, mass storage class Timecode input (TIME CODE IN) BNC Input signal voltage range 0.5–5 Vpp Input impedance 10 kΩ Format SMPTE 12M-1999 compliant REMOTE connector 2.5-mm TRS micro jack Audio performance Frequency response 20 Hz – 20 kHz +0.5/−1 dB (LINE IN to LINE OUT, Fs 48 kHz, JEITA) 20 Hz – 40 kHz +0.5/−1 dB (LINE IN to LINE OUT, Fs 96 kHz, JEITA) 20 Hz – 80 kHz +0.5/−5 dB (LINE IN to LINE OUT, Fs 192 kHz, JEITA) Distortion 0.007 % or less (Mic input to LINE OUT, −10 dBu input, Fs 44.1/48/96/192 kHz, JEITA) S/N ratio 100 dB or more (Line or Mic input to LINE OUT, Fs 44.1/48/96/192 kHz, JEITA) Equivalent input noise (EIN) −124 dBu or less Power supply and other specifications Power supply 4 AA batteries (alkaline, NiMH or lithium) AC adapter (Tascam PS-P520U, sold separately) or USB connection External battery pack (Tascam BP-6AA, sold separately) Power consumption 6.5 W (maximum) Current consumption (USB connection) 1.3 A (maximum) Dimensions (W × H × D) 169 mm × 57 mm × 114 mm (with camera adapter attached) Weight 654 g (including batteries) 561 g (excluding batteries) Permissible operating temperature range 0–40 °C
Guarantee
Fat Llama covers damages up to £25,000 per item Read more
Cancellation Terms
In case of cancellation 2 days before the rental period, 100% of the rental amount is refunded. If canceled one day before the rental period, 50% of the rental amount is refunded. If you cancel the same day the rental period starts, no refund is made. Read more