RODE NTG-2 Microphone and Boom Pole Kit

A fantastic little shotgun microphone perfect for mounting on camera for run and gun work or for Boom Pole work.

The Boom is 3m in length and very comfortable to hold. The microphone is held by elastic isolators which remove handling noise.

I have sample recordings with this set up if you would like to hear some prior to renting.

The NTG-2 can be phantom or battery powered.

I also have a Tascam DR-60D if you require an external recorder.

Included in the kit:

NTG-2 Microphone
Foam Wind Reducer
3m Boom Pole
5m 3-Pin ProSound XLR Cable

I also have other microphone mounting solutions, please send me a message if you require anything else.

Please send me a message if you have any other questions.

Nikon Primes - Cine Modded

Here is a lovely set of Nikon Stills lenses that have been adapted for video use. Aside from the 20mm they are all the older NON-AI versions. 

They give a wonderful vintage feel and flare beautifully. They smooth off the harsh modern digital sensors.

If you'd like some sample images please message me and I can send some across.

Included in the kit:

20mm F2.8 AIS
24mm F2.8 NON-AI
28mm F2.8 NON-AI
35mm F2.8 NON-AI
50mm F1.4 NON-AI
85mm F2.8 NON-AI
135mm F2.8 NON-AI

EF Mount Adapter
Pelican Case

All the lenses have Cool-Lux Follow Focus gears, if needed these can be removed easily by simply sliding off. 

All lenses also have 80mm fronts for ease of use with Mattboxes.

Please note that the iris rings have NOT been declicked and are as standard.

Fantastic little sound recorder, perfect for interview or narrative set-ups.

With the screw at the top and the thread at the bottom is can be mounted on a tripod under the camera for easy single-person shooting.

The recorder has two XLR inputs, Two Jack inputs and a line mic input. It can record up to four channels at a time. Thanks to its excellent pre-amps the sound quality is clean and fantastic.

Will be provided with 4 AA Batteries and SD Card.

Laowa 24mm F14 Probe Lens, with Focus Gear, EF Mount

Fantastic 2:1 Macro lens with a waterproof barrell and built in LED light. Please get touch for sample images. 

Comes with carry case, USB LED Power cable (x2 1 with built in dimmer) and integrated Focus Gear. 

Please get in touch to check availability prior to booking. 

Thanks :)

Astera 8x AX1 LED Tubes with Charging Case (p/n AX1-SET). AX1 is a powerful pixel controllable LED RGBW baton that can be mounted at event and film sites to light up people and objects or create indirect lighting effects. A highly creative device that offers an infinite range of possibilities.

Includes:

8x Tubes
1x Power Cord 
8x Stands 
16x Holders 
16x Spigots 
16x Eye bolts
1x Art7 Asterabox
1x Control Tablet

Please get in touch prior to booking to check availability or if you have any questions. 

Thanks for looking :)

*Please get in touch before requesting rental to check availability*

Fantastic and super versatile car mount system. Comes with both magnets and suction cups, as well as necessary safety tie downs. 

Both Movi and Ronin mounting options included.

Please get in touch about any questions you have.

From the Manufacturer:

The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
Camera Vibration Stabilizer for Red Camera

Building on our RigMount XL mounting platform, the Cloud Mount adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.

This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system (more than $500.00 for typical four point rigging). The Cloud Mount (when purchased complete with case) can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position

Our RigMount magnets are the key to the fast and easy setup of the Cloud Mount. 8 Magnets in the DSLR package provide up to 400lb of pulling force. That is a really large number but in real world conditions it is appropriate measure.

magnetic mounting
Our mid-size package includes 12 magnets (600b) and our pro package 16 magnets (800b).  The magnets are cased in rubber so they won’t damage the surface you are mounting to. For some some surfaces suction is necessary and each option includes 8 of our standard suction cups and vacuum suction cups are available for the most demanding applications.

As with all RigWheels products, there are many different ways you can configure components depending on the shot you’re trying to achieve. What makes the Cloud Mount markedly unique is the versatility of the parts and the degree of fine-tuning and customization possible. With our patent pending design you can build up the system to accommodate ANY gimbal/camera combination using standard cable “wire rope”.

Wire rope vibration dampingStandard cable requirement for a Ronin-M with DSLR is 4, 1/4″ sections of cable. 8, 1/4″ sections will support a standard Ronin with a mid to full-size camera. 16, 1/4″ sections will support approximately 125 pounds. The vibration isolator of this system can use up to 24 sections of cable of up to 7/16″ diameter. (we would love to see a photo of a setup that actually requires that capacity) Because you are able to “let in” or “let out” the cable, you can fine-tune the resistance necessary for your setup. You want vibration isolation loose enough to absorb all of the bumps and vibration but strong enough not to fail under the weight of the camera and gimbal. The Clould Mount gives you the ability to find that perfect balance of resistance, not only for the camera and gimbal but also for the terrain on which you will be operating.

*Please get in touch to confirm availability*

A beautiful lens with full frame coverage, comes with a doubler to make is 600mm, drop in ND filters, lens hood and metal case.

The lens renders wonderfully, is great on skin and produces great colours. 

Please get in touch for sample footage.

Fantastic Dedo Set. 

Comes with:

3x24v 150w Heads controlled by the DT150 control box
1x12v 150x Head controlled by stand-alone dimmer. 
4x Dedo stands
Spare Bulbs
Extension cables. 

Please let me know if you have any questions. 

Please get in touch prior to sending through booking request to confirm availability and pick up. 

Pick up from N6 or EN4, can deliver locally for a fee.

A beautiful set of hard to find Dulens Primes. They are fantastically small and lightweight, perfect for gimbals. Wide open they have unique rainbow flares that disappear if you stop down a little. 

Key Features:

-Covers full-frame sensors
-Lightweight, compact
-Anti Chromatic Aberration
-T2.4 to T16

With each lens weighing about 1.16lbs, DULENS APO MINI PRIME is one of the lightest and most compact prime lens sets on the market. Every APO Mini Prime has a 72mm standard filter thread and an outer diameter of 80mm, which fits most matte boxes and filters. Each focal length shares the same weight and shape, making it easy to swap between lenses in the set. 

A lovely little lens, with a very usable range for big wides. Covers s35 in the whole range and FF at the right end. 

Variety of adapters available please get in touch for info. I can give you sample images on request. 

Please message me to check availability prior to booking. 

Thanks!

Easy communication and flexible timings for dropping off , thank you for your business. 

fantastic lens, great communication, really happy

Thanks for renting, returned on time and in good condition 

This rental fit exactly what I needed and Guido's a lovely guy and speedy with his replies!

Hiring from Guido couldn't have been simpler: easy to communicate with and friendly. Thanks Guido!

Great lender, excellent communication. Very positive experience. Would highly recommend!

Great guy! Brought it all back without issue

Great guy! Kept my gear in good condition 

Great guy, took very good care of my gear. Even collected it from my north London home.

Great guy! Great lenses! Very informative and genuine.! Would definitely recommend!

Guido’s prompt with responses and is super helpful! Will definitely hire again!

So glad I got to finally use your Tascam. It was a great help.

Your equipment was absolutely fantastic to use. Thank you for the support as well 

Great comms and looked after the kit really well. Recommended!

Guido was great, punctual and brought the gear back in great condition.

Guido was very easy to get in touch with and the lenses were great. Thanks!

Guido is very professional and took care of the kit. There were a couple of screws missing in the end but he provided them right away 

Guido is an excellent lender — reliable, flexible, kit in great condition and went out of his way to help me when I was in a tight spot. Fully recommended

Great borrower, good communication and brought the cards back in perfect condition 

Was as described and worked well. Guido was super helpful and understanding when an issue occurred and had to return the slider late. Great gear, great lama.

Brilliant service all round! definitely recommend!  

Great communication; easy to deal with. Kit in good working order. Recommended!

Item was just as described and worked smoothly! Pick-up was very easy aswell.

Guido's equipment helped me out so much! Was even nice enough to spend a few minutes showing me how eveything works!

Effortless and easy rental as ever with Guido. Thanks!

Very happy to rent to the charming Guido. All very easy and straightforward. Thanks Guido!

Guido C

It’s a bit quiet here...

Guido