Roller/spider dolly for tripods. Has 100mm (4") wheels, cable guards, wheel locks, and tracking locks.

Compatible with all 100mm/150mm bowl Sachtler tripods excluding Flowtech, Hot Pod, DA 100 K, DA 150 K, Cine 150, and SOOM. Also compatible with O'Connor tripods such as 1030. May be compatible with other systems too.

Maximum payload: 95kg
Radius when assembled: 579mm
Weight: 4.45kg

Comes in a soft carry case.

The VoxBox Pro is a mirror box which positions in front of the camera lens. It allows filmmakers to shoot down-the-lens interviews whilst maintaining eye contact between the interviewer and the subject.

The interviewer and subject see each other through the mirror, but the subject is actually looking down the lens, resulting in direct eye contact with the audience. It relaxes the subject and allows them to deliver powerful stories and credible interviews.

Similar to an EyeDirect or Interrotron... only better!

There are no cumbersome tripod plates or adaptors to fit - the unit simply attaches in place of your matte box to existing 15mm rails. If you don’t have rails or you are using a small camera, the kit includes a 16mm receiver allowing it to be mounted on a standard lighting stand.

The kit also includes a tablet holder to attach an iPad (not included) or similar, with an app, to convert the system into an autocue/teleprompter, or conduct remote interviews via Zoom/Skype/video call.

The kit does not include 15mm rods, just the mounting point to attach it to existing 15mm rods.

The kit comes in a hard case that weighs about 8kg (the VoxBox itself is 1.9kg) and is about 57cm x 43cm x 32cm in size.

The kit includes:

• VoxBox Pro mkII with detachable side-mirror and 1x glass
• iPad attachment
• stand mount
• 15mm rod support
• instructions
• lens cloth
• flight case

Folding table – suitable for camping, decorating, picnics, film/video/photoshoots, car boot sales, and more!

Assembled: 180cm x 75cm and 74cm high.

Folded: 90cm x 75cm and 8cm thick.

PLEASE NOTE: There is a 1.5cm diameter hole in the surface of the table. This is purely cosmetic, and shouldn't affect usage in most cases! I've photographed it with a normal sized pencil for size comparison.

The Aputure Lantern is a quick pop-up globe softbox for their 120 and 300 series lights (and any other lamp with a Bowens mount). The silk is a 1 stop diffusion, and it includes a blackout/reflector skirt to control the spill of the light. It provides a beautifully soft 270° omni-directional source.

This is the smaller 66cm version.

The Manfrotto LT-BK is a very compact and lightweight tripod. Suitable for phones, and smaller compact cameras.

It features a basic photography-style ball head with a 1/4" screw thread.

It has a maximum 1.5kg payload. It's maximum height is 131cm, and it folds to to just 40cm.

It comes in a soft carry case.

Basic "goal post" style background cross-bar support for photography/video use.

Included are two stands, and four sections of cross-bar (so it can be 3.2m wide, 2.28m wide, or 1.54m wide).

The stands can reach a maximum height of 3.1m, and the cross-bar can be 3.2m at its longest. The maximum payload is 10kg: plenty for holding a Colorama paper roll (not included).

About 3cm of either end of the cross-bar is used by the stand mounting point.

I also have a black drape available on request (not full light-blocking blackout).

The kit comes in a soft case.

The Ergorig is a compact chest harness design to minimise strain on a Camera Operator's body when working with larger cameras in shoulder-mounted configurations.

It works by essentially creating a "fake shoulder" just above one's actual shoulder, with support struts to a waist belt. Thus, the weight of the camera is transferred to the hips and legs, keeping the shoulder and spine free from strain.

The Ergorig has many points of adjustment making it very versatile for different body shapes and sizes.

For more info, see: https://www.ergorig.com/

The kit comes in a soft carry bag, and includes tools for making adjustments.

Classic top-quality handheld reporter's style dynamic microphone (XLR connection).

Designed specifically for ENG use this omni-directional moving-coil microphone has a sophisticated internal shock-mount, dramatically reducing handling noise. The frequency response is designed to provide accurate audio reproduction with maximum intelligibility.

Includes foam windshield, and an optional (upon request) plain black flag to add your own branding or logo.

Comes in a soft pouch. XLR cable not included as standard.

The Metabones MB PL-E-BT1 allows PL lenses to be mounted to E-mount cameras. It’s for Super35/APS-C lenses/sensors. It’s a dumb adaptor, so does not pass through lens servo control or metadata. It is a high quality and robust adaptor. It is strongly recommended to use a lens support with larger lenses: especially if the camera’s E-Mount is of the non-locking variety.

Included is the 15mm rod support for extra strength (MR-SK-BM1).

Also included is a soft pouch, and an Allen key in case the foot of the mount needs to be removed.

This device converts it's HDMI (Type A) input to two 3G SDI outputs. It re-clocks the signal to boost strength on longer cable runs.

It has support it load-in 17x17 LUTs to embed into the signal chain (via USB-C).

It can handle all HD 4:2:2 YUV 10-bit video standards (progressive, PsF, and interlaced, 23.98, 24, 25, 29.97, 47.95, 48, 50, 59.94, and 60).

It also has an SDI loop-out.

It's powered via USB-C (supplied, with a 13A UK mains plug), and can also be powered via a USB battery pack (not supplied).

This device converts it's 3G SDI input to HDMI. It re-clocks the signal to boost strength on longer cable runs.

It has support it load-in 17x17 LUTs to embed into the signal chain (via USB-C).

It can handle all HD 4:2:2 YUV 10-bit video standards (progressive, PsF, and interlaced, 23.98, 24, 25, 29.97, 47.95, 48, 50, 59.94, and 60).

It also has an SDI loop-out.

It's powered via USB-C (supplied, with a 13A UK mains plug), and can also be powered via a USB battery pack (not supplied).

Quad-view interface to allow up to four cameras (or other SDI sources) to be viewed on one monitor.

4x HD-SDI in
1x SD-SDI out (or HDMI out)

Re-clocks the signal to boost strength on longer cable runs, and has various options such as audio meter overlays.

Included is a 13A UK mains adaptor.

The Syrp Genie Mini II is a compact motion control pan/rotate module for panoramic timelapses, and automated rotating shots. It allows one to create precise repeatable keyframed moves.

Combining the turntable makes this an ultra smooth platform for rotating product shots. The platter diameter is 200mm with white/black surface options. Has keyframeable stop-start options for stills photography and timelapse.

The top and bottom attachments are standard 1/4" tripod threads.

It has an internal battery that can be charged by USB-C, or mains powered via the same cable (a 13A main plug NOT included).

Included is a micro-USB control cable for shutter control of Sony Alpha cameras, and it comes in a Peli iM2100 case.

The maximum payload is 4kg.

Control is via bluetooth with an iOS / Android app.

Multi-skilled and highly versatile Lighting Cameraman / DoP and Camera Operator with over 14 years professional experience.

Specialities include PR Promos and Branded Content, Event Films, Live Music/Fashion multi-camera, Factual-entertainment and Specialist Factual Documentary, Television News, and Interviews/Junkets.

Additional areas of experience and expertise include Directing, Technical Consultation, Live Streaming, and Production Management.

Happy taking on projects as a "full service production company", taking you right from concept through to delivery of the finished product, including concept development, booking crew, organising logistics, and all aspects of post-production.

I can supply a wide range of high-end equipment, and also other specialist crew.


**OBVIOUSLY I'M NOT £1 PER DAY! – QUOTES ARE TAILORED TO EACH JOB, BASED AROUND INDUSTRY STANDARD RATES**

For more information, please visit: https://www.videosoul.co.uk/

The Elgato Video Capture is a device to help you convert old video devices, such as VHS cassettes to digital files on your computer. This is the perfect tool to help you turn old family camcorder videos (such as miniDV or VHS-C), or old video cassettes into files that can easily be watched and shared on your computer.

Simply plug the USB end into your computer, and your camcorder/video cassette deck into the relevant connection on the other end, download the easy to use software, and away you go!

Can be used with any devices that have analogue outputs in the form of: S-Video; composite video (yellow RCA phono connector); analogue mono or stereo audio (red and/or white RCA phono connectors), or SCART (via included adaptor). The software should work with any PAL or NTSC 4:3 or 16:9 formats, and will automatically de-interlace. The files the software produces are standard definition H.264 .mp4 files.

The easy to use (Windows or Mac) Elgato software can be downloaded from: https://www.elgato.com/en/video-capture/support

This device enables computers with a Thunderbolt 3 enabled USB-C output (such as many Apple Macs) to send an uncompressed HD (up to 60p) video signal to any HD-SDI or HDMI monitor.

Supplied with a 0.8m Thunderbolt 3 cable.

Enables an HD (up to 60p) video signal to be input via HD-SDI or HDMI into any computer with a Thunderbolt 3 enabled USB-C port (such as many Apple Macs) - ideal for connecting a camera to a computer for live streaming, video capture, or recording direct to an edit timeline.

Supplied with a 0.8m Thunderbolt 3 cable.

The Atomos Connect, is a simple converter that allows you to take HDMI video sources 4K (up to 30p), HD (up to 60p) or 720p (up to 60p) and output up them to a computer via USB at up to 1080p60 to send out to livestreaming or recording software or websites.

Compatible with software such as OBS and Wirecast, or direct to services such as YouTube Live, Facebook Live, Twitch and also sources that expect a webcam input (USB Video Class / UVC) such as Zoom, Skype, Microsoft Teams, Blue Jeans, and many more.

• Supports all standard input signals up to UHD 4Kp30 including 23.98 and 24, but not DCI resolutions or interlaced signals.
• Supports output signals up to 1080p60 (YUV.JPEG).
• Supports 8/10/12-bit colour.

The Blackmagic UpDownCross HD is a full standards converter that lets you convert any SD or HD video format to any other SD or HD video format.

It has both SDI and HDMI inputs and outputs, along with reference input for built-in re‑sync, high quality Teranex conversion algorithms, automatic audio delay for perfect AV sync, and more.

An example of how it could be used, is to convert a PsF signal to true progressive, or an interlaced signal to progressive, and visa versa.

The maximum throughput is 1080p60 YUV 4:2:2, rec709, 48 kHz and 24 bit audio, with timecode support.

A 13A UK mains power supply is included.

This device allows one to distribute a single SD or HD‑SDI connection and duplicate it to up to 8 separate SDI outputs at the same time.

It supports 3G‑SDI signals with fully re‑clocked outputs and automatic switching between all SD and HD formats up to 1080p60 as well as DCI 2K 23.98 / 24 / 25 P or PsF at both 4:2:2 and 4:4:4.

It also supports all ASI, ancillary and embedded audio formats.

Included is a 13A UK mains power supply.

The Atomos AC S2H is a mains powered SDI to HDMI convertor that includes a built-in audio and video test pattern (colour bars) generator that is very useful for troubleshooting and testing video signal lines and displays.

It re-clocks the signal on conversion to improve signal strength over long cable runs.

The AC 2SH also includes a 2:2 pulldown feature to convert incoming interlaced or PsF signals into true 23.98p, 24p, 25p, 29.97p or 30p formatting.

Please note that 3:2 pulldown is not supported by this device.

It allows passthrough of timecode and record start/stop triggers.

Included is a 13A UK mains cable.

Not the most exciting item, but listing just in case renting it from me can help you out in a pinch!

This is a USB powered battery charger for various camera batteries.

I don't supply a USB cable or 13A mains plug as standard, but can supply on request.

The model is DC-K5-DC01. It takes 5V 1A USB input, and outputs 8.4V 500mA.

It is compatible with the following batteries:

Sony – F550 / F750 / F960 / FM50 / FM70 / FM90
Panasonic – VB01 / VB02
JVC – V607u / V617u

This is a handy external CD and DVD reader/writer/player that connects to computers with a USB port.

Inside is a Matshita UJ-898 that was originally in an Apple Mac POwerBook G4 laptop. It works with all current Apple Mac computers. I am unsure if it works with Windows computers.

It can read and record CD-R and CD-RW discs, and DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW discs.

Other specs:

Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Cache: 1024 KB
Max. write speed: 8x

Included is a dual-connector USB cable. Please note, this needs to connect to two USB ports on your computer to work.

An extremely useful device for wedging between two walls, or between the floor and ceiling, in areas where it's inconvenient or not possible to put regular lighting stands. It uses a single-action cantilever locking system that exerts the correct amount of pressure to ensure a secure fit, wedging the protective rubber ends in place. The lever incorporates a safety lock. It's a really useful device for rigging lightweight lighting fixtures, minicams, or backgrounds in inconvenient places.

This is the 032B model that goes from 2.1m to 3.7m.

The diameter of the pole is 45.4mm, and the weight is 2.1kg.

There isn't an advertised payload, but it important to use common sense to ensure it is not being overloaded to the point where it could slip, bend, or crack.

Similarly, please do not over-tighten any clamps you may attach to it, to prevent the tube from being deformed.

Need two? Check out my other listing here: https://fatllama.com/rentals/london/hire-2x-manfrotto-autopole-2137m-93921035

I also have a 0.7m extension available incase you need to make it a bit longer. Click here: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-extension-07m-76789020

Please be advised, that the longer you make it, the more likely it is to sag and slip, so I would only advise this for lighter payloads.

Autopoles are an extremely useful device for wedging between two walls, or between the floor and ceiling, in areas where it's inconvenient or not possible to put regular lighting stands. It uses a single-action cantilever locking system that exerts the correct amount of pressure to ensure a secure fit, wedging the protective rubber ends in place. The lever incorporates a safety lock. It's a really useful device for rigging lightweight lighting fixtures, minicams, or backgrounds in inconvenient places.

These are the 032B models that goes from 2.1m to 3.7m.

The diameter of the tubes are 45.4mm, and the weight is 2.1kg each.

There isn't an advertised payload, but it important to use common sense to ensure it is not being overloaded to the point where it could slip, bend, or crack.

Similarly, please do not over-tighten any clamps you may attach to it, to prevent the tube from being deformed.

Need just one? Check out my other listing here: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-2137m-09731355

I also have 0.7m extensions available incase you need to make it a bit longer. Click here for one: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-extension-07m-76789020
or here for two: https://fatllama.com/rentals/london/hire-2x-manfrotto-autopole-extensions-07m-75106735

Please be advised, that the longer you make it, the more likely it is to sag and slip, so I would only advise this for lighter payloads.

This extension slips on the end of a Manfrotto Autopole to increase it's maximum length by up to 70cm. This listing is for one extension tube.

There isn't an advertised payload, but it important to use common sense to ensure it is not being overloaded to the point where it could slip, bend, or crack.

Similarly, please do not over-tighten any clamps you may attach to it, to prevent the tube from being deformed.

Need two? Check out my other listing here: https://fatllama.com/rentals/london/hire-2x-manfrotto-autopole-extensions-07m-75106735

I also have the Autopoles themselves available. Click here for one: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-2137m-09731355
or here for two: https://fatllama.com/rentals/london/hire-2x-manfrotto-autopole-2137m-93921035

Please be advised, that the longer you make it, the more likely it is to sag and slip, so I would only advise this for lighter payloads.

These extensions slip on the end of Manfrotto Autopoles to increase their maximum length by up to 70cm each. This listing is for two extension tubes.

There isn't an advertised payload, but it important to use common sense to ensure it is not being overloaded to the point where it could slip, bend, or crack.

Similarly, please do not over-tighten any clamps you may attach to it, to prevent the tube from being deformed.

Need just one? Check out my other listing here: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-extension-07m-76789020

I also have the Autopoles themselves available. Click here for one: https://fatllama.com/rentals/london/hire-1x-manfrotto-autopole-2137m-09731355
or here for two: https://fatllama.com/rentals/london/hire-2x-manfrotto-autopole-2137m-93921035

Please be advised, that the longer you make it, the more likely it is to sag and slip, so I would only advise this for lighter payloads.

Contact me for details. I may have other equipment not listed available.

The Light Box 30x120 is a Bowens mount narrow profiled rectangular softbox with a front aperture of 30x120cm.

Its surface area and slim form factor make it ideal for transforming hard point-source Bowens mount LED lights into clean, linear edge lights and key lights for portrait and product photography. Ideal for lighting a full-body shot of a person stood up!

Included is a 1.5 diffusion, 2.5 stop diffusion, inner diffusion baffle, and a 45° grid to control spill.

The dimensions when assembled are 120cm x 30cm x 40cm (depth), and it weighs 1.08kg.

The Pro Scrim is a large 2m x 1.1m frame with various fabrics for controlling light reflections, bounce, spill, negative fill, and shade. It's an extremely versatile kit that can be used in a variety of ways, for a variety of purposes!

The kit includes full black out, white bounce, silver bounce, and a 1.25 stop diffuser. 

Also included are medium-duty two stands and grip supports to allow it to free stand. I can also supply sandbags if required.

Please note: the supplied stands are not suitable for raising to heights over 2m, or for windy exterior environments. You'll need to source much heavier duty stands for this sort of situation.

The kit includes:

• frame
• 1.25 silk diffusion
• reflector
• blackout
• 2x frame clamps
• 2x Avenger grip heads
• 2x medium duty Bowens stands
• case
• sandbags (optional)

The CineView SE is an SDI and HDMI wireless video transmission units with an excellent 1200ft (365m) line-of sight range and a low <50ms latency.

It supports all video signals up to 1080p60, and SDI Level A and B. 

The unit can also stream it’s wireless video image to up to 4 mobile devices with the Accsoon Go app - great for easily showing images to clients!

The app is also really useful for capturing quick screenshots or recordings to send remotely for quick shot approval. You can even stream via the app to any RTMP server.

Included with the kit:

• Accsoon Cineview SE TX
• Accsoon Cineview SE RX
• cold shoe mount (attached to RX unit)
• cold shoe mount for TX unit
• 2x D-tap power cables
• 1x USB-C power cable
• 2x short SDI cables
• hard case

The Fujinon XK6 is an extremely high-end broadcast and cinema grade servo zoom lens.

It's a hugely versatile lens, at home in many environments: outside broadcast, drama, documentary, factual TV, corporate, and events.

Comparable to the popular Canon CN7, with slightly less on the wide-end (20mm instead of 17mm), but with the advantage of having a constant T3.5 aperture range through, with no ramping at the long end. The lens is fully parfocal too.

It has a high resolving power, designed for 4K recording.

It is a PL mount lens, suitable for any PL mount Super35 camera. With native PL mount cameras, the lens can transmit metadata to the camera's on-screen display, and recording. The servo will also be powered via the lens mount. For cameras without a native PL mount (that need adaptors), the lens can be powered via D-Tap.

See my other items for an adaptor to use this lens on E-mount cameras.

Included: in the kit:

• Fujinon XK6 lens with servo hand-grip
• lens hood with protective cap
• Clear filter
• D-Tap power cable
• lens support for 15mm rods
• 2x 15mm rods
• Fujinon ERD-T22 zoom demand wired remote
• polariser filter (optional extra £10 – ask for a custom quote)
• case for lens, and case for accessories

*PLEASE NOTE*

I will only rent this specific item to users I can vett. I will ask for proof of ID, to see some industry credentials (website, portfolio etc), and you will need your own hired-in equipment insurance to cover the value of the kit. You will be responsible for ensure the lens is well looked after and returned in exactly the condition you were given it.

Standard broadcast zoom demand. Compatible with Fujinon B4 broadcast lenses, as well as their PL mount cine lenses (if they have a servo grip).

Useful adaptor that allows V-Lock devices such as cameras and monitors to be powered by 2x Sony NP series batteries instead.

Compatible with Sony NP-F550, NP-F970, and NP-F975 batteries.

Black steel c-stand (vertical section only, no grip arms) with removable “turtle” bases.

• Weight = 6.2kg
• Payload = 10kg
• Min. height = 146cm (126cm without base)
• Max. height = 325cm
• Footprint = 74cm

Two available.

3ft (with 50cm of travel from camera centre at one end to camera centre at the other end). Has a dampened flywheel for super smooth motion. High payload of 40kg, so comfortably takes heavier cameras. 100mm fitting (with a 75mm bowl option too), plus a 100mm half bowl underneath to mount to tripods (not included). Includes 1x monopod to offer additional support. Has integrated feet for using on uneven surfaces.

Included is a soft carry bag.

2x Sony BP-U35 camera batteries. Ideal for use with the Sony FX6 when use on a Ronin RS3, or for a lighter-weight handheld setup.

Also compatible with various other Sony cameras such as the z280, FS5, FS7, and FX9.

With the FX6, each battery should give at least a couple of hours of life.

Included is a single-bay BC-CU1 charger with UK 13A mains plug. Please note, this charger will not work with third-party batteries.

Lightweight, simple, compact video switcher. Perfect for basic livestreaming and multi-camera recording.

It features 4x 3G-SDI inputs (which should accept any input, as they have frame rate and format converters built in). It also features 2x 3.5" minijack inputs that can be switched between mic, mic +48V, or line level.

The 2x 3G-SDI outputs can either be used for the program output, preview output, or the built-in multiviewer.

It supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.


It can also record directly to an attached USB-C drive (SSD recommended). It's possible to record the program mix, ISOs of each input, and also a DaVinci Resolve edit file with all the cut points to assist multi-camera editing afterwards.

For best results it is essential to use the device with a computer (not supplied).

For full specifications and details see here: https://www.blackmagicdesign.com/products/atemsdi/techspecs/W-APS-32

Also included:

• 170cm UK 13A mains power supply
• short USB-C cable
• 140cm ethernet cable
• hard padded case

Please contact me for extras such as longer ethernet cables or SDI cables, and check my other items for HDMI-SDI convertors and the like.

At a minimum, this will support signals up to 3G (1080p50 and 1080p60).

The connectors are high quality Neutrik NBNC75BJP9x BNC plugs and the cable is Evolution 301-299 flexible cable.

Designed to support 4K UHD signals.

The connectors are high quality Neutrik NBNC75BTU11X BNC plugs and the cable is Belden 1694F flexible cable.

The Yamaha MG102C is a high-quality but lightweight and compact audio mixer. It's features include:

• 2x mono mic/line inputs with optional 80Hz high-pass filter, compression, and mono effects inserts* (balanced XLR or balanced 1/4" jack)
• 2x stereo mic/line inputs with optional 80Hz high-pass filter (balanced XLR or unbalanced 1/4" jack pair)
• 2x stereo inputs (unbalanced RCA phono pair or unbalanced 1/4" jack pair)
• +48V phantom power (applied to all XLR inputs simultaneously)
• EQ options on all channels
• stereo master output (1/4" jack pair), impedance balanced +4dBv
• stereo monitor output (1/4" jack pair), impedance balanced +4dBv
• stereo headphone output (1/4" jack)
• one mono aux send (unbalanced 1/4" jack) and stereo return (unbalanced 1/4" jack pair)
• additional stereo "2TR" input (RCA phono pair)
• stereo record output (RCA phono pair)

*inserts require a special cable, not supplied.

It is supplied with the power supply (UK 13A mains plug) and a medium-duty flight case.

A pair of these classic top-quality handheld reporter's style dynamic microphones (XLR connection).

Designed specifically for ENG use this omni-directional moving-coil microphone has a sophisticated internal shock-mount, dramatically reducing handling noise. The frequency response is designed to provide accurate audio reproduction with maximum intelligibility.

Includes 2x foam windshield, and an optional (upon request) plain black flag to add your own branding or logo.

Each mic comes in a soft pouch. XLR cables not included as standard.

• Rugged (aluminium chassis and gorilla glass) design
• Full HD display
• 1700 nit brightness (suitable for sunny outdoors)
• 3D-LUT support
• 3G-SDI and HDMI inputs and outputs with cross-conversion
• V-lock battery plate
• 13A UK mains power supply included

Has a cold-shoe receiver on top to mount a wireless RX, and an adapter on the bottom to mount to 16mm spigot/stands. Also has fasteners to attach optional shoulder/neck strap.

Portabrace XL rain cover designed for the Sony FX6 camera. Includes additional material to cover the  handgrip on extension arms such as those by Shape/SmallRig/Tilta. Includes a removable extra piece to help cover longer lenses.

Popular broadcast-grade wired (XLR) electric condenser lavaliere/lapel microphone. Can be phantom powered, or take 1x AA battery for power.

Metal windshield, clip, and case are included. Battery not included. XLR cable not included.

A pair of these popular broadcast-grade wired (XLR) electric condenser lavaliere/lapel microphones. They can be phantom powered, or take 1x AA battery for power.

Metal windshields, clips, and cases are included. Batteries not included. XLR cables not included.

Avenger D520 40"/120cm grip/flag arm with D200 grip head / knuckle. See my other listings for two C-Stands.

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features textured rubber lining in the jaws.

(MSE MD-420210 6" end-jaw model)

Compact, folding, light-weight table top microphone stand (AKG SA41/1 clamp with KM231/1 stand).

A high-power output single-COB bi-colour lamp. The FC-500B has a very accurate CCT range of 2700K-6500K. The power draw is 520W and its output at 1m is around 65,640 lux. The lamp features a Bowens mount to utilise a wide range of accessories (stock reflector is included).

it can be app controlled, and has a range of effects built in.

The lamp head weighs 3.16kg. This fixture is mains power only.

Comes with case, and power cables.

Softbox and stand not included, but contact me for options.

Great equipment. Nezih was flexible with pickup and drop off times and also helpful with using the equipment I rented. Would be happy to use again. 

Super quick replies, friendly and helpful, overall very good rental experience!

Great piece of kit well packaged in a small peli case.  Nezih was really flexible over collection and drop off times.  Cannot fault, will happily rent from him again.  

First time using the service, Nezih was absolutely brilliant would definitely use again. 

Very communicative and easy to deal with 👍

Was helpful and understanding, a good amount of equipment too

Really easy rental, flexible with pick up/drop off times and helpful with sorting the right kit for the job

Super borrower 👌🏼
Was easy to arrange pick up and drop off 😊
My equipment was in great hands, I would trust this person to lend again ⭐🏅


Great communication, item returned in perfect condition. Pleasure dealing with him!

Extremely efficient and speedy communication. The best I've expirenced on FatLlama. Kit was well maintained and housed with care. I can fully reccomeded Nezih

Super borrower 👌🏼
Was easy to arrange pick up and drop off 😊
My equipment was in great hands, I would trust this person to lend again ⭐🏅



Good communications and flexible with pick up drop off times/places. Thanks again!

Quick at replying, kit in good shape, thanks Nezih 👍

All was great. Good communication, very friendly. My pleasure to hire out my equipment.
Thanks a lot 🤩🙏🏼



Gear was in perfect condition. Picking and drop off has been easy to organise. Perfect. 

Amazing seller, so helpful, great communication

Really helpful and a great first Fat Llama rental!

Great lender, easy communication, kit in order!

Lender wasn't going to be at usual address but the arranged for pickup close by. Great communication.

Always great to hire from Nezih. Great communication, reliable and friendly.

Perfect piece of kit for what I needed to do. Nezih 

Good kit, and good communications and pick up/drop off locations. Would hire again.

Always a great experience to hire from Nezih - reliable, communicative and friendly.

Nezih is always excellent to hire from. Great communication and highly reliable. 

Punctual and understanding and a plesant experience all round. Cool dude.

Excellent person to hire from. Great communication and very reliable.

Excellentto hire from. Great communication and reliable.

Very understanding and polite, straight forwards and a smooth process.

"Super borrower 👌🏼
Was easy to arrange pick up and drop of 😊
My equipment was in great hands, I would trust this person to lend again ⭐🏅"

Took very good care of the item. Timely return. A++++++ Borrower

Video Soul

It’s a bit quiet here...

Video Soul

Communications