Ronin S gimbal for small and medium cameras

Comes with 1 battery and dual-grip handle from SmallRig for easier control and movement

Tokina 11-16 F2.8 DX II wide angle lens

EF mount for Canon cameras

Panasonic Lumix 35-100mm f/2.8 Power O.I.S. - Telephoto micro four thirds lens

Comes with lens hood (not pictured)

This cart is suitable for transporting photo, video or sound gear (or just about anything) across town or around a large building space. The wheels can handle varied terrain, although of course common sense required - don't expect it to climb a mountain or go far 'offroad'. 

"The unique 8-in-1 design can transform easily to adjust to various load sizes, letting you move large amounts of gear in no time at all."

Tiffen 82mm Black Pro Mist 1/4 Filter 

Plus stepper ring set available for all standard lens sizes to 37mm. 1/8 filter also available, please see my other items.

Tiffen 82mm Black Pro Mist 1/8 Filter 

Plus stepper ring set available for all standard lens sizes to 37mm. 1/4 filter also available, please see my other items.

Included:
- Canon C200
- SmallRig top plate and handle
- Canon C200 LCD on ballmount
- 1 x BP-A30 and 1 BP-A60 batteries
- charger
- 2 x 256GB CFast cards
- 2 x 128GB SD cards

Provided in Peli hardcase with roller wheels. 

Please see other listings for lenses and accessories or message me with any questions.

Capture sharp and natural 4K images internally in Cinema RAW Light, MP4 or XF-AVC formats, recording to CFast 2.0 or SD cards respectively; additionally, shoot 120P slow-motion in Full HD, making the EOS C200 suitable for a variety of productions.



Rode NTG3 Shotgun Mic in metal case, with short XLR cable

Screw-on camera mount and wind shields on request

Requires phantom power

An excellent microphone for indoor interviews and a variety of other uses.

Schoeps Cmc 6 Ug Microphone Amplifier
- Flat frequency response
- Extremely low noise and distortion
- Balanced, very low-impedance output
- Can be used with very long cables
- Well-protected against RFI
- For use with 12- or 48-Volt phantom powering

The CMC 6 Ug is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered

Schoeps Mk 41 Microphone Capsule

The MK 41 is strongly directional. Sound arriving from off axis is attenuated even more than with a cardioid. The pickup is “drier” and less susceptible to acoustic feedback than any other SCHOEPS capsule type (a loudspeaker should not be located directly along the rear axis of the microphone, however).

Features
- Supercardioid with highly consistent directionality throughout its frequency range
- For music and speech
- High directivity, comparable to that of a short “shotgun“ microphone up through midrange frequencies
- Often preferred for use in film sound recording and as a spot microphone in orchestras


Sigma 18-35mm f/1.8 DC HSM A Series Art Lens - variable wide EF mount lens

Comes with lens hood (not pictured)

Extendable camera slider that allows unique dolly-type movement. Suitable for all DSLR-type cameras, but also useable with heavier cameras such as Canon C200.

Can be table-mounted, but best used on a tripod for full range of movement.

The SliderPLUS Medium from edelkrone is a slider that uses a unique tracking mechanism that allows the rails of the slider to move with the camera when mounted on a tripod. This gives the slider 24" of sliding range in a unit that is only 17.2" long.

Excellent low-light prime lens, very sharp, smooth bokeh

Suitable for photo and video (though not a stabilised lens)

https://www.dpreview.com/reviews/canon-35mm-f1-4-ii



Variable daylight LED panel with V-mount battery

Battery provides over 2 hours continuous lighting, or plug and cable can be used for unlimited duration

Comes with stand (light at approx 6ft), battery, battery charger, diffuser, softbox and carry case

I have another kit like this available to hire, please contact me for a deal on both together.

A brilliant low-light lens for MFT cameras, creating gorgeous shallow depth of field and sharp images.



SmallHD 702 touch on-camera monitor

highly visible display, plenty of signal and power options, world-class software tools

Included:
- monitor
- 2 batteries (and charger)
- 12-inch or 24-inch SDI cable
- choice of mount for nato rail or small magic arm

Canon C70 RF mount cinema camera with canon's EF-RF speed booster for using EF lenses

Included:
- Canon C70
- Canon top handle
- 2 x BP-A30 batteries
- charger
- 2 x 128GB SD cards
- RF-EF mount adapter (Canon Mount Adapter EF-EOS R 0.71x)
- one lens from my other listings

Provided in Peli hardcase with roller wheels. 

Please see other listings for lenses and accessories or message me with any questions.

Top condition kit, very friendly and convenient pick up! Will be in touch again 🙌🏻

The legendary ronin-s gimbal, including focus wheel. Fits most DSLRs - I use it for all my videography work, but often sits in my flat unused. Rental to professional videographers only.

Ronin S Gimbal no follow focus with box and charging cable.

The DJI Ronin-SC is a super-portable, 3-axis single handle gimbal made for mirrorless cameras. It features a magnesium & aluminium construction providing robust performance and weighs just 1.1 kg. With a modular, quick setup design, Ronin-SC can pack neatly in limited space and be carried with ease.

The Pro Combo kit includes a BG18 battery grip, an extended grip mini tripod, a quick-release camera plate, a camera riser, a focus motor with rod mount, control and charging cables, a focus motor with wheel and rod mount, and a storage case.

In the box:

DJI Ronin-SC Gimbal Stabilizer
DJI BG18 Grip for Ronin-SC Gimbal
DJI Camera Riser for Ronin-SC or Ronin-S Gimbal
DJI Multicamera USB Control Cable for Ronin-SC Gimbal
DJI USB Type-C Multicamera Control Cable for Ronin-SC Gimbal
DJI USB Type-C To Micro-USB Multicamera Control Adapter for Ronin-SC Gimbal
USB Type-C Charging Cable
Quick Release Camera Mounting Plate
Extended Grip/Tripod
Lens Support
Focus Motor
Focus Motor Rod Mount
Focus Wheel
Focus Gear Strip
RSS Splitter
6x Screws
2 x Allen Wrench
2 x 8-Pin Port Cover
3 x 1/4"-20 Screw
4 x M4 Screw
Storage Case

Greater Compatibility
Ronin-SC supports a wide range of cameras and lenses while meeting strict performance standards. Ronin-SC has been rigorously tested to support a payload of 2.0 kg while still achieving a smooth, cinematic shot. Intuitive and user-friendly controls for shutter and focus are also available for most camera brands.

Dynamic Stability
Even in action-packed scenes, Ronin-SC gives a perfectly stable shot. Sport mode improves the sensitivity of each axis while continuing to maintain stabilization, making Ronin-SC more effective in fast follows, sudden motions, and even complete changes in direction.

Unobstructed Roll Axis Arm
An innovative framework elevates camera payload above the roll axis, keeping the camera's built-in display free of obstruction. After DJI introduced this concept, it has been embraced throughout the handheld gimbal industry.

Unlimited Yaw Axis
The yaw axis allows for continuous movement, freeing the camera for more ambitious shots. Options like an infinite 360° roll allow filmmakers to achieve completely unique shots.

Down to Every Detail
The buttons and trigger are easy to reach for every essential control. A flared battery grip makes extended holding easier and slip-resistant, letting you capture moments throughout the day.

Panorama
Smooth, automated movement control allows you to create panoramas with unparalleled quality and precision.

Timelapse
Make the passage of time your ultimate storytelling tool, capturing sunsets and blossoming flowers in a steady frame.

Motionlapse
Smooth gimbal movement adds a compelling element to your timelapse.

Motion Control
Create a camera movement path to repeat the exact frame you want, whenever you need.

ActiveTrack 3.0
ActiveTrack technology arrives for the first time in the Ronin series. A smartphone mounted above the camera, the Ronin app, and Ronin-SC works together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.

Force Mobile
Ronin-SC introduces Force Mobile, an app-based version of the Force Pro camera movement control system. By tilting and rotating your smartphone, users can control the gimbal with ultra-low latency, delivering a fluid, expressive shot with an instinctive feel.

Ronin App
The Ronin app has also been improved for an even better user experience making Ronin-SC professional and easy to use. The layout has been refined to offer quicker access to preset scenarios, and we've also included a camera balancing guide, along with tutorials to help users master their handheld gimbal. The app also minimizes hardware tuning, setting filmmakers free to produce great footage.

Ronin S Gimbal kit with monitor arm, new. Great for DSLR/Mirrorless cameras! 

An original Ronin-S gimbal camera stabilizer with carry case. Does not come with the focus wheel. Can take a good amount of weight and currently have it set up so mode 3 is flashlight mode (where you can do a full camera horizontal spin!). I usually use with my Sony A73 and have no problems with weight. Have seen one on YouTube be used with a RED camera, but I'd say anything under 6kg will work fine.

Ronin SC handheld gimbal for DSLR and smaller video cameras.  
With charging cables plate etc as comes in box.  

 Shoulder rig / Movie rig for DSLR and small cameras. 

Duel handled shoulder mount for DSLR video cameras etc up to 13kgs.

This is an original DJI Ronin S and comes with all the equipment that came with it when I bought it new. All mounting brackets are included as well as the charger. Very easy to set up, I can help you balance your camera if you like, takes about 2 minutes. This is more heavy duty than the Ronin-sc and can hold pretty heavy DSLR's. I've been using it with my Canon 5D mk iv with a 16-35mm and 70-200 works just fine.

Here for rent for collection from Bristol, or London (dependent on dates- please query).

Included are 5 Inspire Intelligent TB50 batteries and a monitor magic arm (smallrig) for rigging solutions + usual Ronin 2 included accessories. 

Any queries or additional clamps/supports or cabling questions please get in touch. 

Also for hire from me is a Readyrig GS + ProArms and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

many thanks,

Cansen

INCLUDED IN BOX
1x Ronin 2 Gimbal
1x Grip
1x Remote Controller
2x TB50 Intelligent Battery
1x TB50 Battery Mount
1x Battery Charger
1x Battery Charger Power Cable
1x Quad Charging Hub
1x Ronin 2 Power Hub
1x Camera Top Cross Bar
1x Camera Base Plate
1x Accessory Mount 115mm Rod
1x 15mm Focus Rod Mount
1x Ronin 2 Universal Mount
1x Top Mounting Block
1x MotionBlock
1x Neck Strap
1x Water Tight Protective Case (with custom foam)
1x Accessories Package (Screws and Hex Keys)
1x ARRI Alexa Mini Power Cable
1x ARRI Alexa Mini Start/Stop Cable
1x RED Power Cable
1x RED RCP Control Cable
1x Ronin 2 Power Cable
1x 2-pin Power Cable
1x DC Power Cable
1x Triple P-TAP Breakout Box
1x SDI IN Cable
1x SDI OUT Cable
1x USB Type-C Data Cable
1x UART to D-BUS Cable
1x Multi Tool
5x Camera Screw 3/8-16
5x Camera Screw 1/4-20
8x Screws M4-10
4x Screws M4-14
4x Screws 1/4

Description:

DJI Ronin 2 is a professional 3-axis handheld gimbal that is highly compatible with cable cams, drones, cranes, Steadicams, and more. Its customisable mounting modes such as handheld, Car Mount, Aerial, and Tripod mode help the Ronin 2 work accurately in different shooting scenerios. Also, it new Pan Lock mode has been specifically designed for work with Steadicam.

The DJI Ronin 2 is the successor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone. The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

Like Ronin, Ronin 2 was designed for handheld camera applications. Now, Ronin 2 is more versatile with aerial, car-mounting, cablecam, and Steadicam capabilities. It is also compatible with a large number of professional cinema cameras and accessories like sunshades and filters.

Higher-torque motors allow Ronin 2 to support an increased payload of approximately 30 lbs (13.6 kg), while new stabilization algorithms combine data from multiple sensors to perform smoothly in high-stress environments.

For more reliability and convenience, new features include a dual-battery system, built-in screen, adjusting knob, GPS algorithm, camera control system, and power system. These provide Ronin users with unmatched stability, power, and reliability.

The DJI Ronin 2 is the sucessor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone.

The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

What are the main differences between Ronin and Ronin 2?

Like the original Ronin, Ronin 2 was designed for handheld camera applications but is now more versatile with aerial, car mounting, cablecam and Steadicam capabilities. Higher torque motors give Ronin 2 a larger payload and new GPS algorithms allow it to perform smoothly in high-stress environments. Along with many other improvements, Ronin 2 brings a whole new level of stabilization to Ronin users.

What is Ronin 2’s maximum payload?

Ronin 2’s maximum payload is approximately 30lbs (13.6kg). Through DJIs own extensive testing, Ronin 2 can handle an Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens comfortably.

Overall, is stabilization on Ronin 2 higher-performing and more accurate than Ronin/Ronin-M/Ronin-MX?

Yes. Ronin 2 was created with stronger motors and its SmoothTrack algorithm has been enhanced for smoother performance. A new GPS module enables it to perform much better in high G-force situations.

Are all three previous modes of operation still available on Ronin 2?

Yes. All three previous modes of operation — upright, underslung, and briefcase — are available with Ronin 2. What’s new is that users can now transition between upright and underslung modes without changing the orientation of the camera. Users can now lock the yaw motor for 2-axis mode while using Ronin 2 with a Steadicam. Now you can lock each axis for an easier setup, better balancing, and safer transportation.

How does the new yaw axis quick release differ from previous Ronins?

The new yaw axis quick release mount in Ronin 2 means a faster set up in different scenarios, enabling an easier transition from handheld to car and aerial applications.

Does Ronin 2 come with a dedicated stand?

No. However, Ronin 2’s new hand and ring grip design come with retractable feet so that the whole gimbal system can stand upright on a flat surface. The grip is detachable and can be separated when standing is not required for shooting or transportation.

What kind of batteries does Ronin 2 use?

Ronin 2 uses the same batteries as the Inspire 2.

Are Ronin series batteries compatible with the Ronin 2?

No. The Ronin 2 is only compatible with Ronin 2 or Inspire 2 batteries and is NOT compatible with any previous Ronin series batteries.

How long is the battery life of Ronin 2?

When powering the Ronin 2 and a RED Dragon camera simultaneously, the Ronin 2 dual battery system will last up to 2.5 hours.

How long does it take to fully charge the battery?

When using the Inspire 2 charging hub, it will take approximately 90 minutes to fully charge both batteries.

What is a hot-swappable battery?

A hot-swappable battery eliminates power-related downtime to ensure maximum available power. For example, when shooting a scene with batteries at low power, hot swappable batteries allow you to change one of the batteries without turning off the camera system, gimbal, or accessories. Hot-swappable batteries thus allow you to shoot continuously and uninterrupted.

Can I use the Ronin 2 battery with third party products like monitors?

Yes. The battery system is designed with a P-TAP port that allows you to power your accessories with industry standard power cables.

What cameras are compatible with Ronin 2?

Ronin 2 is compatible with a large number of cameras. The biggest that DJI tested so far is the Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens.

Do I have full control on the cameras mounted on Ronin 2?

For selected cameras, user can control its settings such as ISO, frame rate, resolution or start/stop through our new camera control module.

What is the largest lens I can mount on Ronin 2?

The largest lens tested on Ronin 2 with an Alexa Mini weighed about 6.6lbs (3kg). But the largest size of lens varies based off different cameras.

Does Ronin 2 come with a remote controller?

Yes. The new remote controller is smaller than before with a more functional joystick. It also has dual control frequency bands 2.4 GHz and 5.8 GHz.

What are the main differences between this and previous remote controllers?

Users can now change the control speeds of the joystick directly on the remote controller by tweaking the knobs, without changing any settings in the gimbal assistant app or directly on Ronin 2.

What is the control range of Ronin 2?

Unobstructed control range is over 1 km.

What is the new gimbal assistant app? What can I do with it?

The new gimbal assistant app has all the fundamental gimbal parameters such as SmoothTrack settings, motor stiffness, and gimbal operation modes. Included are new intelligent features that are studio-oriented such as Panorama, Timelapse and direct control of supported cameras.

What is the built-in screen for?

Ronin 2’s new built-in ultra-bright touch screen provides the convenience of changing gimbal settings without using a mobile device directly on the gimbal. With the built-in screen, users are now able to change most of the settings they see on the new gimbal assistant app.

Can I use third-party remote controllers with Ronin 2?

Yes, you can.

Are all Ronin series accessories compatible with Ronin 2?

No.

- Heavy-Duty Aluminium Shoulder Rig with Dual Hand-Grips for Increased Stability
- Cushioned Shoulder Pad Alleviates Stress and Fatigue and Increases Comfort
- Supports DSLR Cameras up to 30 lb (13.6 kg)

Hire includes 1kg weight (see photo)

Placeholder image, to be updated.

DJI Ronin M gimbal. Comes with 1 battery, and charger. 

Also comes with 1920x1080 HDMI monitor and batteries for this.

Can be lent along with my A7Sii kit and lenses, please see other listings.

NB - Does not include tuning stand, but balancing is easily achieved, for example using the backs of two adjacent chairs is enough to hang the gimbal on while balancing. This is reflected in the rental price. I am happy to assist with balancing for a different payload.

DJI Ronin 2 Professional Combo

WHATS INCLUDED:
* 1x Ronin 2 Gimbal
* 1x Water Tight Protective Case
* 1x Ronin 2 Power Hub
* 1x Camera Mounting Plate
* 1x Camera Upper Mounting Plate
* 1x Remote Controller
* 1x Dual TB50 Battery Mount
* 2x TB50 Intelligent Battery
* 1x Quad Charging Hub
* 1x Battery Charger Power Cable
* 1x Battery Charger
* 1x Grip
* 1x Ronin 2 Power Hub
* 1x Camera Top Cross Bar
* 1x Camera Base Plate
* 1x Accessory Mount
* 2x 15mm Extension Rod
* 1x 15mm Rod Mount
* 1x Ronin 2 Universal Mount
* 1x Top Mounting Block
* 1x Motion Block
* 1x Monitor Mounting Bracket
* 1x Accessories Package (Screws & Hex Keys and Hex Tool)
* 1x Cables Package (Arri Alexa Mini Power Cable, Arri Alexa Start/Stop Cable, Red Power Cable, Red RCP Control Cable, Ronin 2 Power Cable, 2-pin Power Cable, DC Power Cable, Triple P-tap breakout box, SDI IN Cable, SDI OUT Cable, USB Type-C Data Cable, ,  UART to D-BUS Cable. 1x  each.)
* 1x Manual

FeiyuTech Feiyu AK2000 3-Axis Handheld Gimbal Stabilizer with LCD Touch Panel Compatible with Panasonic/Sony/Nikon Cameras, 12H Runtime, MAX Payload 2.8KG, M4 Kernel MCU, WiFi Bluetooth Dual Module.
Comes with extender pole.


Here for rent for collection from Bristol, or London at an extra cost (please query your dates).

Also for hire from me is a Ronin 2 and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

OVERVIEW
Ready Rig RR-GSPA (RR-GSPA) ProArm GS Camera and Gimbal Support System Kit with Case. Ready To Go

This package contains the Ready Rig GS with the newly released ProArms preinstalled.
Extended Range

The ProArms can be operated in the locked or unlocked position providing the operator support throughout the systems range.

Durable Design
Made to withstand the elements, these carbon fiber arms are all custom manufactured in the U.S.

Monitor Mount
Stop remounting your monitor for every configuration and always keep it in your line of site.

Increased Payload
Built your camera package how you want because with the new ProArms you can carry up to 40lbs!

INCLUDED IN BOX
1x Original Ready Rig GS
2x PreInstalled ProArm shoulder mounts
2x ProArm telescopic carbon fiber arms

Complete DJI Ronin S kit, as it comes when bought new from DJI in protective styrofoam case.

Easy to operate, for use with DSLR’s and Mirrorless Cameras between 1.5 to 3.7lbs. Comes with case, batteries, mini usb charging cable and UK plug.

Тhе DЈІ RЅ 2 Рrо Соmbо іѕ thе реrfесt gіmbаl fоr рrо-lеvеl fіlmmаkіng аnd dуnаmіс сіnеmаtоgrарhу, dеlіvеrіng іnduѕtrу-lеаdіng саmеrа ѕtаbіlіѕаtіоn. Тhе gіmbаl оffеrѕ 4.5kg оf tеѕtеd рауlоаd wіth а wеіght оf оnlу 1kg – thе hіghеѕt wеіght-tо-рауlоаd rаtіо іn thе іnduѕtrу tо dаtе. Іt іѕ еquірреd wіth thе Fіnе-tunе Ваlаnсіng Кnоb, Ахіѕ Lосkѕ thаt kеер thе gіmbаl аrmѕ іn рlасе, аnd Теflоn-соаtеd Аrmѕ fоr ѕmооth mоvеmеnt оf thе аrmѕ whіlе аdјuѕtіng. Асhіеvе ѕmооth ѕhоtѕ wіth сіnеmаtіс ѕhаrрnеѕѕ аnd еnјоу а multіtudе оf ѕhооtіng орtіоnѕ wіth thе DЈІ RЅ 2. Тhе Рrо Соmbо соmеѕ wіth рlеntу оf hаndу ассеѕѕоrіеѕ thаt аrе ѕurе tо furthеr ѕhооtіng роѕѕіbіlіtіеѕ.

Kit Includes
1 х DЈІ RЅ 2
1 х Саrrу Саѕе
1 х ВG30 Grір
1 х UЅВ-С Сhаrgіng Саblе (40сm)
1 х Quісk-Rеlеаѕе Рlаtе (Аrса-Ѕwіѕѕ/Маnfrоttо)
1 х Вrіеfсаѕе Наndlе
1 х Рhоnе Ноldеr
1 x Monitor Mount
1 х Fосuѕ Моtоr
1 х Fосuѕ Моtоr Rоd Моunt Кіt
1 х Fосuѕ Gеаr Ѕtrір
1 х Іmаgе Тrаnѕmіttеr
1 х Соld Ѕhое tо 1/4-іnсh-20 Аdарtеr
1 х UЅВ-С Роwеr Саblе (20сm)
1 х Міnі-НDМІ tо НDМІ Саblе (20сm)
1 х Міnі-НDМІ tо Міnі-НDМІ Саblе (20сm)
1 х Міnі-НDМІ tо Місrо-НDМІ Саblе (20сm)
2 х Мultі-Саmеrа Соntrоl Саblе (UЅВ-С, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Ѕоnу Мultі, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Місrо-UЅВ, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Міnі-UЅВ, 30сm)


The DJI OSMO Gimbal is ideal for smooth footage from your smartphone. As most smartphones can capture 4K footage nowadays, using them in combination with this Gimbal is an extremely cost-effective way of creating stunning videos.

Glidecam HD 4000 

Camera Stabiliser

Manfrotto Quick Release Plate

DJI Ronin S stabiliser - gimbal kit with dual grip handle

Description

Location

Item lent by Ross

Other items from Ross

Ross's reviews

FAQs

DJI Ronin S stabiliser - gimbal kit with dual grip handle

Explore other options around Bristol