EasyRig MiniMax 
(MM100 2-7kg Camera Support System)

Items Included:
x1 EasyRig MiniMax
x1 Soft Carry Case / Rucksack

Teradek Bolt 500 XT

Items Included:
- 1x Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter
- 1x Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver
- 2x D-Tap to 2-pin Lemo Power Cable
- 1x PSU 2-Pin Connector to 18W AC Adapter Cable (6')
- 1x Shoe Mount
- 2x Antenna
- 2x SDI Cable
- 2x HDMI Cable
- 1x Hot shoe Thumbscrew
- 1x Light Stand Adapter (1/4"-20)
- 1x SKB Case

Canon C100 MKII

Items Included:
1x Canon C100 MKII Camera Body
1x Canon C100 MKII Top Handle Unit
1x Canon C100 MKII Side Grip Unit
3x Canon BP-955 Batteries
4x 128GB SD Cards
1x Canon CG-940 
Battery Charger
1x Canon CA-941 Power Adapter
1x Fig 8 Mains Cable
1x Tenba Cineluxe Backpack 21

Ronin S Gimbal kit with monitor arm, new. Great for DSLR/Mirrorless cameras! 

 Shoulder rig / Movie rig for DSLR and small cameras. 

The DJI Ronin-SC is a super-portable, 3-axis single handle gimbal made for mirrorless cameras. It features a magnesium & aluminium construction providing robust performance and weighs just 1.1 kg. With a modular, quick setup design, Ronin-SC can pack neatly in limited space and be carried with ease.

The Pro Combo kit includes a BG18 battery grip, an extended grip mini tripod, a quick-release camera plate, a camera riser, a focus motor with rod mount, control and charging cables, a focus motor with wheel and rod mount, and a storage case.

In the box:

DJI Ronin-SC Gimbal Stabilizer
DJI BG18 Grip for Ronin-SC Gimbal
DJI Camera Riser for Ronin-SC or Ronin-S Gimbal
DJI Multicamera USB Control Cable for Ronin-SC Gimbal
DJI USB Type-C Multicamera Control Cable for Ronin-SC Gimbal
DJI USB Type-C To Micro-USB Multicamera Control Adapter for Ronin-SC Gimbal
USB Type-C Charging Cable
Quick Release Camera Mounting Plate
Extended Grip/Tripod
Lens Support
Focus Motor
Focus Motor Rod Mount
Focus Wheel
Focus Gear Strip
RSS Splitter
6x Screws
2 x Allen Wrench
2 x 8-Pin Port Cover
3 x 1/4"-20 Screw
4 x M4 Screw
Storage Case

Greater Compatibility
Ronin-SC supports a wide range of cameras and lenses while meeting strict performance standards. Ronin-SC has been rigorously tested to support a payload of 2.0 kg while still achieving a smooth, cinematic shot. Intuitive and user-friendly controls for shutter and focus are also available for most camera brands.

Dynamic Stability
Even in action-packed scenes, Ronin-SC gives a perfectly stable shot. Sport mode improves the sensitivity of each axis while continuing to maintain stabilization, making Ronin-SC more effective in fast follows, sudden motions, and even complete changes in direction.

Unobstructed Roll Axis Arm
An innovative framework elevates camera payload above the roll axis, keeping the camera's built-in display free of obstruction. After DJI introduced this concept, it has been embraced throughout the handheld gimbal industry.

Unlimited Yaw Axis
The yaw axis allows for continuous movement, freeing the camera for more ambitious shots. Options like an infinite 360° roll allow filmmakers to achieve completely unique shots.

Down to Every Detail
The buttons and trigger are easy to reach for every essential control. A flared battery grip makes extended holding easier and slip-resistant, letting you capture moments throughout the day.

Panorama
Smooth, automated movement control allows you to create panoramas with unparalleled quality and precision.

Timelapse
Make the passage of time your ultimate storytelling tool, capturing sunsets and blossoming flowers in a steady frame.

Motionlapse
Smooth gimbal movement adds a compelling element to your timelapse.

Motion Control
Create a camera movement path to repeat the exact frame you want, whenever you need.

ActiveTrack 3.0
ActiveTrack technology arrives for the first time in the Ronin series. A smartphone mounted above the camera, the Ronin app, and Ronin-SC works together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.

Force Mobile
Ronin-SC introduces Force Mobile, an app-based version of the Force Pro camera movement control system. By tilting and rotating your smartphone, users can control the gimbal with ultra-low latency, delivering a fluid, expressive shot with an instinctive feel.

Ronin App
The Ronin app has also been improved for an even better user experience making Ronin-SC professional and easy to use. The layout has been refined to offer quicker access to preset scenarios, and we've also included a camera balancing guide, along with tutorials to help users master their handheld gimbal. The app also minimizes hardware tuning, setting filmmakers free to produce great footage.

Duel handled shoulder mount for DSLR video cameras etc up to 13kgs.

Ronin SC handheld gimbal for DSLR and smaller video cameras.  
With charging cables plate etc as comes in box.  

The legendary ronin-s gimbal, including focus wheel. Fits most DSLRs - I use it for all my videography work, but often sits in my flat unused. Rental to professional videographers only.

Ronin S gimbal for small and medium cameras

Comes with 1 battery and dual-grip handle from SmallRig for easier control and movement

An original Ronin-S gimbal camera stabilizer with carry case. Does not come with the focus wheel. Can take a good amount of weight and currently have it set up so mode 3 is flashlight mode (where you can do a full camera horizontal spin!). I usually use with my Sony A73 and have no problems with weight. Have seen one on YouTube be used with a RED camera, but I'd say anything under 6kg will work fine.

Placeholder image, to be updated.

DJI Ronin M gimbal. Comes with 1 battery, and charger. 

Also comes with 1920x1080 HDMI monitor and batteries for this.

Can be lent along with my A7Sii kit and lenses, please see other listings.

NB - Does not include tuning stand, but balancing is easily achieved, for example using the backs of two adjacent chairs is enough to hang the gimbal on while balancing. This is reflected in the rental price. I am happy to assist with balancing for a different payload.

Zhiyun Crane 2 - Professional 3-Axis Stabilizer Handheld Gimbal 
Zhiyun Mechanical Follow Focus

- Very quick and easy to to balance.
- Can take payloads up to 3.2KG (ie 5D, a7S, GH5 + Mater Lens).
- Inbuilt follow focus works with Canon cameras and native lenses after 2008.
- Perfect for getting smooth cinematic shots on a budget or as a solo operator.
- Mechanical follow focus unit is compatible with any lens/camera (within weight/size limit)
- Very easy follow focus system to set up and use for solo operator

Included:
1x Gimbal Stabilizer
1x Tripod
1x 18650 3-Battery Charger
3x 18650 Li-ion Batteries
1x Micro to Micro USB Cable
1x Micro to Mini USB Cable
1x Canon Camera Control/Charging Cable
1x Panasonic Camera Control Cable
1x Micro USB Cable
1x User Manual
1x Shoulder strap
1x Carrying Case
1x Zhiyun mechanical follow focus unit
1x Adjustable tooth ring to fit any lens with the follow focus

This Rickshaw is a great alternative to laying tracking and has many advantages. Firstly it takes five minutes to set up then you can film as many shots as you like without having to lay the track repeatedly, saving hours. The seat rotates 360 and elevates. When folded down it will fit in a regular car boot, its great for indoor and outdoor locations. Designed for filming fantastic stable shots anywhere, providing far superior stability when used in combo with stabilizers. Crews can work all day no matter what the weight or complexity of kit, no more risky walking backward or crabbing. The seat rotates 360 and elevates.  
32kg
126cm long folded 252cm full length
79cm wide
24cm deep folded down.

Durable construction with double-hand handgrip and C-shaped shoulder pad. Designed by ergonomics for comfortable operation. 15mm rail system to attach follow focus, matte box and more.


Great gimbal and useful size. For details have a look on the DJI website: https://www.dji.com/ronin-s
Perfect for A7Sii or and many other dslrs

The Libec Swift Jib50 is a great piece of film equipment that is fairly lightweight considering its capabilities.

With a maximum camera load of 5kg most cameras can be used with this Jib.

The jib can reach a height of 9 feet and is smooth, portable and lightweight

This hire comes with:

SwiftJib 50
Jib Legs with spreader
Manfrotto 504 video head
Weights (apropriate to the camera you are using)
Cary case


(the images were taken by myself and are not from the internet)


FeiyuTech Feiyu AK2000 3-Axis Handheld Gimbal Stabilizer with LCD Touch Panel Compatible with Panasonic/Sony/Nikon Cameras, 12H Runtime, MAX Payload 2.8KG, M4 Kernel MCU, WiFi Bluetooth Dual Module.
Comes with extender pole.


Here for rent for collection from Bristol, or London at an extra cost (please query your dates).

Also for hire from me is a Ronin 2 and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

OVERVIEW
Ready Rig RR-GSPA (RR-GSPA) ProArm GS Camera and Gimbal Support System Kit with Case. Ready To Go

This package contains the Ready Rig GS with the newly released ProArms preinstalled.
Extended Range

The ProArms can be operated in the locked or unlocked position providing the operator support throughout the systems range.

Durable Design
Made to withstand the elements, these carbon fiber arms are all custom manufactured in the U.S.

Monitor Mount
Stop remounting your monitor for every configuration and always keep it in your line of site.

Increased Payload
Built your camera package how you want because with the new ProArms you can carry up to 40lbs!

INCLUDED IN BOX
1x Original Ready Rig GS
2x PreInstalled ProArm shoulder mounts
2x ProArm telescopic carbon fiber arms

Here for rent for collection from Bristol, or London (dependent on dates- please query).

Included are 5 Inspire Intelligent TB50 batteries and a monitor magic arm (smallrig) for rigging solutions + usual Ronin 2 included accessories. 

Any queries or additional clamps/supports or cabling questions please get in touch. 

Also for hire from me is a Readyrig GS + ProArms and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

many thanks,

Cansen

INCLUDED IN BOX
1x Ronin 2 Gimbal
1x Grip
1x Remote Controller
2x TB50 Intelligent Battery
1x TB50 Battery Mount
1x Battery Charger
1x Battery Charger Power Cable
1x Quad Charging Hub
1x Ronin 2 Power Hub
1x Camera Top Cross Bar
1x Camera Base Plate
1x Accessory Mount 115mm Rod
1x 15mm Focus Rod Mount
1x Ronin 2 Universal Mount
1x Top Mounting Block
1x MotionBlock
1x Neck Strap
1x Water Tight Protective Case (with custom foam)
1x Accessories Package (Screws and Hex Keys)
1x ARRI Alexa Mini Power Cable
1x ARRI Alexa Mini Start/Stop Cable
1x RED Power Cable
1x RED RCP Control Cable
1x Ronin 2 Power Cable
1x 2-pin Power Cable
1x DC Power Cable
1x Triple P-TAP Breakout Box
1x SDI IN Cable
1x SDI OUT Cable
1x USB Type-C Data Cable
1x UART to D-BUS Cable
1x Multi Tool
5x Camera Screw 3/8-16
5x Camera Screw 1/4-20
8x Screws M4-10
4x Screws M4-14
4x Screws 1/4

Description:

DJI Ronin 2 is a professional 3-axis handheld gimbal that is highly compatible with cable cams, drones, cranes, Steadicams, and more. Its customisable mounting modes such as handheld, Car Mount, Aerial, and Tripod mode help the Ronin 2 work accurately in different shooting scenerios. Also, it new Pan Lock mode has been specifically designed for work with Steadicam.

The DJI Ronin 2 is the successor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone. The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

Like Ronin, Ronin 2 was designed for handheld camera applications. Now, Ronin 2 is more versatile with aerial, car-mounting, cablecam, and Steadicam capabilities. It is also compatible with a large number of professional cinema cameras and accessories like sunshades and filters.

Higher-torque motors allow Ronin 2 to support an increased payload of approximately 30 lbs (13.6 kg), while new stabilization algorithms combine data from multiple sensors to perform smoothly in high-stress environments.

For more reliability and convenience, new features include a dual-battery system, built-in screen, adjusting knob, GPS algorithm, camera control system, and power system. These provide Ronin users with unmatched stability, power, and reliability.

The DJI Ronin 2 is the sucessor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone.

The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

What are the main differences between Ronin and Ronin 2?

Like the original Ronin, Ronin 2 was designed for handheld camera applications but is now more versatile with aerial, car mounting, cablecam and Steadicam capabilities. Higher torque motors give Ronin 2 a larger payload and new GPS algorithms allow it to perform smoothly in high-stress environments. Along with many other improvements, Ronin 2 brings a whole new level of stabilization to Ronin users.

What is Ronin 2’s maximum payload?

Ronin 2’s maximum payload is approximately 30lbs (13.6kg). Through DJIs own extensive testing, Ronin 2 can handle an Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens comfortably.

Overall, is stabilization on Ronin 2 higher-performing and more accurate than Ronin/Ronin-M/Ronin-MX?

Yes. Ronin 2 was created with stronger motors and its SmoothTrack algorithm has been enhanced for smoother performance. A new GPS module enables it to perform much better in high G-force situations.

Are all three previous modes of operation still available on Ronin 2?

Yes. All three previous modes of operation — upright, underslung, and briefcase — are available with Ronin 2. What’s new is that users can now transition between upright and underslung modes without changing the orientation of the camera. Users can now lock the yaw motor for 2-axis mode while using Ronin 2 with a Steadicam. Now you can lock each axis for an easier setup, better balancing, and safer transportation.

How does the new yaw axis quick release differ from previous Ronins?

The new yaw axis quick release mount in Ronin 2 means a faster set up in different scenarios, enabling an easier transition from handheld to car and aerial applications.

Does Ronin 2 come with a dedicated stand?

No. However, Ronin 2’s new hand and ring grip design come with retractable feet so that the whole gimbal system can stand upright on a flat surface. The grip is detachable and can be separated when standing is not required for shooting or transportation.

What kind of batteries does Ronin 2 use?

Ronin 2 uses the same batteries as the Inspire 2.

Are Ronin series batteries compatible with the Ronin 2?

No. The Ronin 2 is only compatible with Ronin 2 or Inspire 2 batteries and is NOT compatible with any previous Ronin series batteries.

How long is the battery life of Ronin 2?

When powering the Ronin 2 and a RED Dragon camera simultaneously, the Ronin 2 dual battery system will last up to 2.5 hours.

How long does it take to fully charge the battery?

When using the Inspire 2 charging hub, it will take approximately 90 minutes to fully charge both batteries.

What is a hot-swappable battery?

A hot-swappable battery eliminates power-related downtime to ensure maximum available power. For example, when shooting a scene with batteries at low power, hot swappable batteries allow you to change one of the batteries without turning off the camera system, gimbal, or accessories. Hot-swappable batteries thus allow you to shoot continuously and uninterrupted.

Can I use the Ronin 2 battery with third party products like monitors?

Yes. The battery system is designed with a P-TAP port that allows you to power your accessories with industry standard power cables.

What cameras are compatible with Ronin 2?

Ronin 2 is compatible with a large number of cameras. The biggest that DJI tested so far is the Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens.

Do I have full control on the cameras mounted on Ronin 2?

For selected cameras, user can control its settings such as ISO, frame rate, resolution or start/stop through our new camera control module.

What is the largest lens I can mount on Ronin 2?

The largest lens tested on Ronin 2 with an Alexa Mini weighed about 6.6lbs (3kg). But the largest size of lens varies based off different cameras.

Does Ronin 2 come with a remote controller?

Yes. The new remote controller is smaller than before with a more functional joystick. It also has dual control frequency bands 2.4 GHz and 5.8 GHz.

What are the main differences between this and previous remote controllers?

Users can now change the control speeds of the joystick directly on the remote controller by tweaking the knobs, without changing any settings in the gimbal assistant app or directly on Ronin 2.

What is the control range of Ronin 2?

Unobstructed control range is over 1 km.

What is the new gimbal assistant app? What can I do with it?

The new gimbal assistant app has all the fundamental gimbal parameters such as SmoothTrack settings, motor stiffness, and gimbal operation modes. Included are new intelligent features that are studio-oriented such as Panorama, Timelapse and direct control of supported cameras.

What is the built-in screen for?

Ronin 2’s new built-in ultra-bright touch screen provides the convenience of changing gimbal settings without using a mobile device directly on the gimbal. With the built-in screen, users are now able to change most of the settings they see on the new gimbal assistant app.

Can I use third-party remote controllers with Ronin 2?

Yes, you can.

Are all Ronin series accessories compatible with Ronin 2?

No.

 DJI Ronin M Gimbal with quick release plate. This ronin has been heavily used but is extremely reliable and gives great camera stabilisation to a variety of smaller mirrorless cameras. It comes with 3 DJI ronin M batteries, battery charger and the stand for gimbal calibration. 

This is an original DJI Ronin S and comes with all the equipment that came with it when I bought it new. All mounting brackets are included as well as the charger. Very easy to set up, I can help you balance your camera if you like, takes about 2 minutes. This is more heavy duty than the Ronin-sc and can hold pretty heavy DSLR's. I've been using it with my Canon 5D mk iv with a 16-35mm and 70-200 works just fine.

DJI Ronin 2 Professional Combo

WHATS INCLUDED:
* 1x Ronin 2 Gimbal
* 1x Water Tight Protective Case
* 1x Ronin 2 Power Hub
* 1x Camera Mounting Plate
* 1x Camera Upper Mounting Plate
* 1x Remote Controller
* 1x Dual TB50 Battery Mount
* 2x TB50 Intelligent Battery
* 1x Quad Charging Hub
* 1x Battery Charger Power Cable
* 1x Battery Charger
* 1x Grip
* 1x Ronin 2 Power Hub
* 1x Camera Top Cross Bar
* 1x Camera Base Plate
* 1x Accessory Mount
* 2x 15mm Extension Rod
* 1x 15mm Rod Mount
* 1x Ronin 2 Universal Mount
* 1x Top Mounting Block
* 1x Motion Block
* 1x Monitor Mounting Bracket
* 1x Accessories Package (Screws & Hex Keys and Hex Tool)
* 1x Cables Package (Arri Alexa Mini Power Cable, Arri Alexa Start/Stop Cable, Red Power Cable, Red RCP Control Cable, Ronin 2 Power Cable, 2-pin Power Cable, DC Power Cable, Triple P-tap breakout box, SDI IN Cable, SDI OUT Cable, USB Type-C Data Cable, ,  UART to D-BUS Cable. 1x  each.)
* 1x Manual

Zhiyun crane V2 motorized gimbal. Great for mirrorless cameras.

Flycam 5000 camera stabiliser.

This makes such a difference to the smoothness of any footage.

A solid aluminum construction with precise balancing & a telescopic post, this stabilizer ensures super quick balancing, saving your production time. It helps you capture fully stable & ultra smooth shots under any shooting scenarios.

The X & Y movement on the camera platform helps to adjust the horizontal balance quickly. There is a camera attachment on the top that can be seen in the photos.

Comfortable foam cushioned handle attached with precise 3-axis gimbal that has ball bearing which provides rotational camera control with easy ‘on axis’ movement. The handgrip swivels left and right from the bolt. Angle bracket enables grip to move up and down for easy vertical movement.

- Heavy-Duty Aluminium Shoulder Rig with Dual Hand-Grips for Increased Stability
- Cushioned Shoulder Pad Alleviates Stress and Fatigue and Increases Comfort
- Supports DSLR Cameras up to 30 lb (13.6 kg)

Hire includes 1kg weight (see photo)

Ronin S Gimbal no follow focus with box and charging cable.

Up for rent is my DJI Osmo Pro, it comes with the Zenmuse X5 Camera which can capture stunning footage. It comes with the 15mm kit lens and an Olympus 14-42mm zoom lens, both come with ND filters. Also included are 5 x batteries, DJI Tripod attachment and a DJI extender rod, all come boxed in neat foam filled brief case. 

Discounts given to those requiring multiple days. 

C shaped camera stabilizer for overarm carrying or attaching to objects. 

Gimbal designed for DSLR and Mirrorless cameras, supported focus wheel for Sony, Panasonic and more

Really good gimbal for any kind of smartphone. Comes with a little tripod!


Freefly systems Movi M15 brushless gimbal. This one has the extended arms on all sides fitted so it can comfortably take a Sony FS5/Canon C1/2/300 set up with metabones and canon lens, normal size battery etc Reds, Arri minis etc

Comes with a full ring which makes putting it down when still set up simple, ring has feet etc, nice light set up. Has RAM mounts or a female screw socket for putting monitors etc onto the ring. Can supply with SDI monitor too if needed.

Comes with all chargers, 3 batteries and lipo bag for transporting them. 

Zhiyun crane v2 with remote, batteries and dual handle

Laing P-04S (P-03/P-04 Upgrade) 2015 New 1-15kg Pro Carbon Fiber Stabilizer for Video Camera DSLR 

Zhiyun Crane 2 Camera Stabilizer

Smart rig 11 inch Adjustable Power Articulating Magic Arm

6 Official Batteries
Travel Case 

DJI Osmo Handheld 4K Camera and 3-Axis Gimbal Bundle, comes with mic, deadcat and 3 brand new battery.

Easy to operate, for use with DSLR’s and Mirrorless Cameras between 1.5 to 3.7lbs. Comes with case, batteries, mini usb charging cable and UK plug.

Тhе DЈІ RЅ 2 Рrо Соmbо іѕ thе реrfесt gіmbаl fоr рrо-lеvеl fіlmmаkіng аnd dуnаmіс сіnеmаtоgrарhу, dеlіvеrіng іnduѕtrу-lеаdіng саmеrа ѕtаbіlіѕаtіоn. Тhе gіmbаl оffеrѕ 4.5kg оf tеѕtеd рауlоаd wіth а wеіght оf оnlу 1kg – thе hіghеѕt wеіght-tо-рауlоаd rаtіо іn thе іnduѕtrу tо dаtе. Іt іѕ еquірреd wіth thе Fіnе-tunе Ваlаnсіng Кnоb, Ахіѕ Lосkѕ thаt kеер thе gіmbаl аrmѕ іn рlасе, аnd Теflоn-соаtеd Аrmѕ fоr ѕmооth mоvеmеnt оf thе аrmѕ whіlе аdјuѕtіng. Асhіеvе ѕmооth ѕhоtѕ wіth сіnеmаtіс ѕhаrрnеѕѕ аnd еnјоу а multіtudе оf ѕhооtіng орtіоnѕ wіth thе DЈІ RЅ 2. Тhе Рrо Соmbо соmеѕ wіth рlеntу оf hаndу ассеѕѕоrіеѕ thаt аrе ѕurе tо furthеr ѕhооtіng роѕѕіbіlіtіеѕ.

Kit Includes
1 х DЈІ RЅ 2
1 х Саrrу Саѕе
1 х ВG30 Grір
1 х UЅВ-С Сhаrgіng Саblе (40сm)
1 х Quісk-Rеlеаѕе Рlаtе (Аrса-Ѕwіѕѕ/Маnfrоttо)
1 х Вrіеfсаѕе Наndlе
1 х Рhоnе Ноldеr
1 x Monitor Mount
1 х Fосuѕ Моtоr
1 х Fосuѕ Моtоr Rоd Моunt Кіt
1 х Fосuѕ Gеаr Ѕtrір
1 х Іmаgе Тrаnѕmіttеr
1 х Соld Ѕhое tо 1/4-іnсh-20 Аdарtеr
1 х UЅВ-С Роwеr Саblе (20сm)
1 х Міnі-НDМІ tо НDМІ Саblе (20сm)
1 х Міnі-НDМІ tо Міnі-НDМІ Саblе (20сm)
1 х Міnі-НDМІ tо Місrо-НDМІ Саblе (20сm)
2 х Мultі-Саmеrа Соntrоl Саblе (UЅВ-С, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Ѕоnу Мultі, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Місrо-UЅВ, 30сm)
1 х Мultі-Саmеrа Соntrоl Саblе (Міnі-UЅВ, 30сm)


The DJI OSMO Gimbal is ideal for smooth footage from your smartphone. As most smartphones can capture 4K footage nowadays, using them in combination with this Gimbal is an extremely cost-effective way of creating stunning videos.

Freefly Movi Pro Handheld Bundle with protective Jason Case.
4x Movi Pro Batteries 
2x Movi Pro Battery Chargers

Price inclusive of VAT. VAT invoice can be provided on request.

An amazing DSLR Shoulder Rig offering a variety of positions for getting stabilised shots and eliminate camera shakes.

Check out my other listings as I have plenty of other camera items.

Complete DJI Ronin S kit, as it comes when bought new from DJI in protective styrofoam case.

EasyRig MiniMax

Description

Location

Item lent by Andi

Other items from Andi

FAQs

EasyRig MiniMax

Explore other options around Bristol