 Wireless Follow focus setup or for use on Aperture on cine lenses. Can also be used with the provided photographic lens ring on non-cinema lenses. Kit comes with 3 rings for markings (please use scotch tape) 2 x 2 sets of batteries so you can keep charging and shooting with the handheld fiz. Motor has a d-tap out, please query if you have any questions on this. Batteries typically last all day, and will be provided fully charged (with charger). Charger requires a fig 8 cable, which can be supplied upon request. Motor and fizz are super easy to setup, turn them on and they automatically connect after a few seconds. You can change the frequency of both if you have any issues. INCLUDED IN BOX
1x WLC-T03-FIZ Nucleus M FIZ unit
1x WLC-T03-M Nucleus M Motor
1x FR-T03 Photographic Lens Follow Focus Gear Ring
1x WLC-T03-PTAP-7P Nucleus-M P-TAP to 7-Pin Motor Power Cable
2x WLC-T03-MD-1 Nucleus-M Follow Focus marking Disk
1x WLC-T03-LAN Nucleus-M FIZ Lanyard
1x WLC-T03-BC Nucleus M Battery Charger

Here for rent for collection from Bristol, or London (dependent on dates- please query).

Included are 5 Inspire Intelligent TB50 batteries and a monitor magic arm (smallrig) for rigging solutions + usual Ronin 2 included accessories. 

Any queries or additional clamps/supports or cabling questions please get in touch. 

Also for hire from me is a Readyrig GS + ProArms and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

many thanks,

Cansen

INCLUDED IN BOX
1x Ronin 2 Gimbal
1x Grip
1x Remote Controller
2x TB50 Intelligent Battery
1x TB50 Battery Mount
1x Battery Charger
1x Battery Charger Power Cable
1x Quad Charging Hub
1x Ronin 2 Power Hub
1x Camera Top Cross Bar
1x Camera Base Plate
1x Accessory Mount 115mm Rod
1x 15mm Focus Rod Mount
1x Ronin 2 Universal Mount
1x Top Mounting Block
1x MotionBlock
1x Neck Strap
1x Water Tight Protective Case (with custom foam)
1x Accessories Package (Screws and Hex Keys)
1x ARRI Alexa Mini Power Cable
1x ARRI Alexa Mini Start/Stop Cable
1x RED Power Cable
1x RED RCP Control Cable
1x Ronin 2 Power Cable
1x 2-pin Power Cable
1x DC Power Cable
1x Triple P-TAP Breakout Box
1x SDI IN Cable
1x SDI OUT Cable
1x USB Type-C Data Cable
1x UART to D-BUS Cable
1x Multi Tool
5x Camera Screw 3/8-16
5x Camera Screw 1/4-20
8x Screws M4-10
4x Screws M4-14
4x Screws 1/4

Description:

DJI Ronin 2 is a professional 3-axis handheld gimbal that is highly compatible with cable cams, drones, cranes, Steadicams, and more. Its customisable mounting modes such as handheld, Car Mount, Aerial, and Tripod mode help the Ronin 2 work accurately in different shooting scenerios. Also, it new Pan Lock mode has been specifically designed for work with Steadicam.

The DJI Ronin 2 is the successor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone. The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

Like Ronin, Ronin 2 was designed for handheld camera applications. Now, Ronin 2 is more versatile with aerial, car-mounting, cablecam, and Steadicam capabilities. It is also compatible with a large number of professional cinema cameras and accessories like sunshades and filters.

Higher-torque motors allow Ronin 2 to support an increased payload of approximately 30 lbs (13.6 kg), while new stabilization algorithms combine data from multiple sensors to perform smoothly in high-stress environments.

For more reliability and convenience, new features include a dual-battery system, built-in screen, adjusting knob, GPS algorithm, camera control system, and power system. These provide Ronin users with unmatched stability, power, and reliability.

The DJI Ronin 2 is the sucessor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone.

The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.

What are the main differences between Ronin and Ronin 2?

Like the original Ronin, Ronin 2 was designed for handheld camera applications but is now more versatile with aerial, car mounting, cablecam and Steadicam capabilities. Higher torque motors give Ronin 2 a larger payload and new GPS algorithms allow it to perform smoothly in high-stress environments. Along with many other improvements, Ronin 2 brings a whole new level of stabilization to Ronin users.

What is Ronin 2’s maximum payload?

Ronin 2’s maximum payload is approximately 30lbs (13.6kg). Through DJIs own extensive testing, Ronin 2 can handle an Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens comfortably.

Overall, is stabilization on Ronin 2 higher-performing and more accurate than Ronin/Ronin-M/Ronin-MX?

Yes. Ronin 2 was created with stronger motors and its SmoothTrack algorithm has been enhanced for smoother performance. A new GPS module enables it to perform much better in high G-force situations.

Are all three previous modes of operation still available on Ronin 2?

Yes. All three previous modes of operation — upright, underslung, and briefcase — are available with Ronin 2. What’s new is that users can now transition between upright and underslung modes without changing the orientation of the camera. Users can now lock the yaw motor for 2-axis mode while using Ronin 2 with a Steadicam. Now you can lock each axis for an easier setup, better balancing, and safer transportation.

How does the new yaw axis quick release differ from previous Ronins?

The new yaw axis quick release mount in Ronin 2 means a faster set up in different scenarios, enabling an easier transition from handheld to car and aerial applications.

Does Ronin 2 come with a dedicated stand?

No. However, Ronin 2’s new hand and ring grip design come with retractable feet so that the whole gimbal system can stand upright on a flat surface. The grip is detachable and can be separated when standing is not required for shooting or transportation.

What kind of batteries does Ronin 2 use?

Ronin 2 uses the same batteries as the Inspire 2.

Are Ronin series batteries compatible with the Ronin 2?

No. The Ronin 2 is only compatible with Ronin 2 or Inspire 2 batteries and is NOT compatible with any previous Ronin series batteries.

How long is the battery life of Ronin 2?

When powering the Ronin 2 and a RED Dragon camera simultaneously, the Ronin 2 dual battery system will last up to 2.5 hours.

How long does it take to fully charge the battery?

When using the Inspire 2 charging hub, it will take approximately 90 minutes to fully charge both batteries.

What is a hot-swappable battery?

A hot-swappable battery eliminates power-related downtime to ensure maximum available power. For example, when shooting a scene with batteries at low power, hot swappable batteries allow you to change one of the batteries without turning off the camera system, gimbal, or accessories. Hot-swappable batteries thus allow you to shoot continuously and uninterrupted.

Can I use the Ronin 2 battery with third party products like monitors?

Yes. The battery system is designed with a P-TAP port that allows you to power your accessories with industry standard power cables.

What cameras are compatible with Ronin 2?

Ronin 2 is compatible with a large number of cameras. The biggest that DJI tested so far is the Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens.

Do I have full control on the cameras mounted on Ronin 2?

For selected cameras, user can control its settings such as ISO, frame rate, resolution or start/stop through our new camera control module.

What is the largest lens I can mount on Ronin 2?

The largest lens tested on Ronin 2 with an Alexa Mini weighed about 6.6lbs (3kg). But the largest size of lens varies based off different cameras.

Does Ronin 2 come with a remote controller?

Yes. The new remote controller is smaller than before with a more functional joystick. It also has dual control frequency bands 2.4 GHz and 5.8 GHz.

What are the main differences between this and previous remote controllers?

Users can now change the control speeds of the joystick directly on the remote controller by tweaking the knobs, without changing any settings in the gimbal assistant app or directly on Ronin 2.

What is the control range of Ronin 2?

Unobstructed control range is over 1 km.

What is the new gimbal assistant app? What can I do with it?

The new gimbal assistant app has all the fundamental gimbal parameters such as SmoothTrack settings, motor stiffness, and gimbal operation modes. Included are new intelligent features that are studio-oriented such as Panorama, Timelapse and direct control of supported cameras.

What is the built-in screen for?

Ronin 2’s new built-in ultra-bright touch screen provides the convenience of changing gimbal settings without using a mobile device directly on the gimbal. With the built-in screen, users are now able to change most of the settings they see on the new gimbal assistant app.

Can I use third-party remote controllers with Ronin 2?

Yes, you can.

Are all Ronin series accessories compatible with Ronin 2?

No.

Here for rent for collection from Bristol, or London at an extra cost (please query your dates).

Also for hire from me is a Ronin 2 and Canon FD Vintage Lenses 17mm, 28mm, 50mm, 135mm.

OVERVIEW
Ready Rig RR-GSPA (RR-GSPA) ProArm GS Camera and Gimbal Support System Kit with Case. Ready To Go

This package contains the Ready Rig GS with the newly released ProArms preinstalled.
Extended Range

The ProArms can be operated in the locked or unlocked position providing the operator support throughout the systems range.

Durable Design
Made to withstand the elements, these carbon fiber arms are all custom manufactured in the U.S.

Monitor Mount
Stop remounting your monitor for every configuration and always keep it in your line of site.

Increased Payload
Built your camera package how you want because with the new ProArms you can carry up to 40lbs!

INCLUDED IN BOX
1x Original Ready Rig GS
2x PreInstalled ProArm shoulder mounts
2x ProArm telescopic carbon fiber arms

Here is a beautiful custom set of Canon FD Vintage lenses I've been collecting over the past few years. Finding them in such pristine condition was tough, but the rewards are well worth it. 

I also have 4 x FD-NEX (Sony E mount adapters) so using these for any Sony E mount camera will be straightforward.

Lenses:

17mm f/4 (S.S.C) (c.1973)
28mm f/2.8 (nFD) (c.1979)
50mm f/1.4 (nFD) (c.1979)
135mm f/3.5 (S.C.) (c.1976)

All lenses are in great condition for their age and have no signs of fungus or haze. General wear and tear scratches are present on the outer casing of some of the lenses but nothing affecting optics. 

Within the glass dust specks are present here and there which is natural for lenses this old, but once more nothing that affects optical performance.

These lenses have great character and for shoots looking to achieve something different/vintage on a budget these are perfect. Im looking to acquire something in the long portrait range next! :) happy shooting!

Feel free to message me with any queries! Available to pick up - I may be able to drop off for no extra cost! A great portable mini follow focus, great for gimbal work.

Includes:
- Nucleus-Nano Hand Wheel Controller
- Nucleus-Nano Wireless Follow Focus Motor
- 15mm Single Rod Mounting Baseplate For 95mm Lens
- 1/4″-20 Hex Screws
- Rod Mount Hex Screws
- 15mm x 100mm Black Aluminum Rod 
- 31cm 5V Micro USB male to 5V Micro USB male motor power cable
- 12V / 2A Ronin-S to 5V Micro USB male motor power cable
- 2x Photographic lens follow focus gear rings
- Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x
- Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1
- 14500 Battery Charger
- 2x 14500 Batteries
- Allen keys
- Soft Case
- User Guide

Specs:
https://tilta.com/shop/nucleus-nano-wireless-lens-control-system/

- Please be prepared to send your ID and proof of address. 



Suitable for lenses with a diameter of up to 114mm, this Bright Tangerine Misfit Atom 4x5.65"/4x4" Ultra Lightweight 2-stage clip-on matte box holds up to two 4x4" or 4x5.65" filters. 

Lightweight and compact.

Comes with 
X1 Atom Misfit
X1 clamp on 87mm
X1 screw on 77mm
X1 screw on 82mm


Follow Focus with Gear Ring for non cine lens

Hard stops, marker board and no backlash!

Tilta Nucleus M Kit 1

Description

Location

Item lent by Cansen

Other items from Cansen

FAQs

Tilta Nucleus M Kit 1

Explore other options around Bristol