Features:
•	128GB Storage Capacity
•	Optimized for 4K Video Recording
•	Up to 160MB/s Read Speed
•	Up to 150MB/s Write Speed
•	Compatible with RAW & JPEG Formats
•	Includes RTV Silicone Coating

The Kessler Crane Digital Revolution Head brings the latest in digital motion control technology to a proven Kessler platform that can accommodate rigs up to 20 lbs. Ideal for cranes and jibs as well as able to be tripod or slider mounted, the Digital Revolution Head can be mounted over or under-slung to provide dynamic pan and tilt camera movement in a variety of shooting environments. 

Kit includes:
1x Digital Revolution Head
1x Digital Control Center (3 axis digital joystick)
1x SecondShooter Controller
4x MagPak Batteries and Chargers
1x SecondShooter Slider Motor
1x Hard Case

1x Kessler Kwik Stand 
1x Kessler Kwik Stand 15mm Rod Adapter Kit
1x Kessler DogBone Offset Motor Bracket
1x SecondShooter F.I.Z. Motor and adapter

What makes our Wasp 100-C™ stand out from the crowd? We’ve combined brilliant and energy-efficient LED lights with our Perfect S.H.O.T.™ system. It is a simple product built around you, made for real production scenarios. Our totally unique fixture combined with infinite accessories and smart controls will forever change the way you experience lighting.

Kit contains:

1x Hive Wasp 100-C 
1x 22° Reflector
1x ETC Shutter Barrel for Source Four Mini
1x Shutter Barrel adapter plate
1x 50° ETC Source Four Mini Lens
1x 19° ETC Source Four Mini Lens
1x AC Power supply
1x 25' 4pin XLR power cable
1x 10' 4pin XLR power cable
1x Kessler ION Battery with 4pin XLR output
1x Impact Light stand
1x Rosco Size E Steel Gobo #7215 (Louvre)
1x Rosco Size E Steel Gobo #7053 (Dot Breakup)
1x Rosco Size E Steel Gobo #7739 (Parallel Breakup)
1x Rosco Size E Steel Gobo #7529 (Tracery 2)

1x Case for light and all accessories except light stand

PRODUCT HIGHLIGHTS

24.2MP APS-C Exmor CMOS Sensor
BIONZ X Image Processor
XGA Tru-Finder 2.36m-Dot OLED EVF
3.0" 921.6k-Dot Tilting Touchscreen LCD
Internal UHD 4K Video & S-Log3 Gamma
S&Q Motion in Full HD from 1-120 fps
5-Axis SteadyShot INSIDE Stabilization
Built-In Wi-Fi with NFC
4D FOCUS with 425 Phase-Detect Points
Up to 11 fps Shooting and ISO 51200

Kit contains:
1x Sony Alpha a6500
1x Sony APS-C 50mm OSS f/1.8 AF Lens with filter
1x Sony APS-C 35mm OSS f/1.8 AF Lens with filter
1x Sony APS-C 20mm f/2.8 AF Lens with filter
2x 64GB SanDisk Extreme Pro SDXC cards
1x Remote Shutter Release cable for external intervalometers
2x Sony NP-FW50 Lithium-Ion Battery
1x ProMaster NP-FW50
1x ProMaster single battery charger
1x USB Charger for camera

1x ThinkTank Mirrorless Bag

The Stage R: Rotary System is a tough-as-nails lightweight multi-stage motion control unit. Use it as a standalone pan or tilt time-lapse and real-time video platform, combine two units for 2-axis pan and tilt motion or add two units to your slider for full 3-axis motion control.

Kit contains:
2x Stage R Bricks
2x 19:1 Stepper Motors
1x NMX Pro Controller
1x Slider motor
1x Slider motor mount (Choose between Kessler ShuttlePod or Stealth Slider)
1x Right angle plate for connecting Stage R bricks
1x Right angle plate for camera

Features:
•	Pan and Tilt motion control head that sits between a tripod and your DSLR or Video Camera
•	Auxiliary, 3rd powered stepper output to drive another motor. Three-axis repeatable motion is here
•	Supports point A to point B, moving time-lapse shots with a shoot-move-shoot (SMS) sequence or shoot smooth continuous video
•	Setup your shot by using a wired or wireless gaming remote in 7 steps
•	Shoot Move Shoot (SMS) intervals of 0.4 to 999.9 sec (.1 sec resolution) or Video setting for continuous motion
•	HDR shooting supported for most DSLR
•	Ramping allows for natural looking starts and stops
•	Shot durations of 1 minute to 99 hours
•	Built in intervalometer to trigger most DSLRs
•	Repeatable stepper motors with low-backlash gearing

Kessler KC-12 Crane Kit Contrains:
* K-Pod Tripod, Hercules Head 2.0, tripod wheels and hard cases
* 12' Kessler Crane with extended weight bar, rear control center and hard case
* Kessler Digital Revolution Head (Motorized Pan/Tilt) and Digital Control Center (3 axis joystick control) and rigid bag
* Manfrotto Magic Arm for holding DCC
* 65lbs of 1" barbell weights
* Kessler Kwik Plate with 15mm rails and Receiver Plate
*RocknRoller R18RT Cart with deck
*2x 25lb sandbags

*Monitor and wireless follow focus not included

Features:
•	V3 Mounting plate / base section
•	360° Rotation
•	Invertible camera platform for Under Slung or Over Slung Positions
•	Two arm design for maximum stability and minimum wobble
•	Internal sleeve bearings for smoothness
•	Constructed of high grade 6061-T6 aluminum
•	Coated with a flat black non-reflective finish
•	Right and left hand set up options
•	Rear control (manual tilt) handle
•	Manual, fixed-angle mode, and automatic camera tilt control
•	Sliding weight bar for balance
•	Uses standard household style exercise weights (1" hole)
•	Breaks down into three easily transported sections
•	All parts are precision made and held to ± 0.005" tolerances
•	In the Box
•	Kessler Crane KC-12/8 Ultra HD Camera Crane

The Kessler Shuttle Pod™ is a modular camera dolly system that comes in 2' and 4' lengths. The Shuttle Pod™ has multiple optional camera mounting options available, using the Cheese Plate and 100mm Bowl Mount inserts.
The Shuttle Pod™ is completely smooth and silent and can even be removed and used as a table top dolly, by rolling on a smooth surface. When used on track, only straight moves are possible; no curved moves.

System includes:
4x 4' Track pieces
2x Outrigger Feet
2x End Clamps
1x Hard Case
3x Cross Braces
6x Long Couplers
1x 100mm Bowl Tripod Mount
1x Cheese plate
1x ShuttlePod Carriage
1x Pair of Keeper Grabber wheels
4x Tripods for support

Can be paired with any of my motorized Motion Heads:
https://sharegrid.com/chicago/l/29732 (3 Axis Kessler Second Shooter Kit)
https://sharegrid.com/chicago/l/29588 (3 Axis Dynamic Perception Stage R Kit)

The Kessler Kwik Stand is the ultimate gear-saving Kwik Release compatible plate that provides additional camera stability when resting your camera on flat surfaces, protecting it from toppling over. The Kwik Stand has four points of contact via its rubber feet that grip hard surfaces and provide anti-slip resistance to further ensure camera stability. All Kwik Stand models also provide threaded accessory holes for added versatility and accessory mounting. 

The Kwik Stand 15mm Rod Adapter is a compact and lightweight adapter used to add 15mm rods to the Kessler Kwik Stands.

Vertical Motion Control Kit Contrains:

* K-Pod Tripod, Hercules Head 2.0, tripod wheels and hard cases

* 12' Kessler Crane with extended weight bar, rear control center and hard case

* Dynamic Perception NMX Pro, Slider Motor and iPad

* Kessler ShuttlePod carriage, feet, motor mounts and 20’ of motor belt 

* 65lbs of 1" barbell weights

*RocknRoller R18RT Cart with deck

*2x 25lb sandbags

Features:
•	Control DSLR Remotely via iOS Device (Canon & Nikon Only) See https://camranger.com/knowledge-base/supported-cameras/ for complete list of compatible cameras
•	Photo/ Video Capture, Live View, HDR
•	Intervalometer, Bulb, Focus Stacking
•	Control Shutter Speed, Aperture, WB, ISO
•	Metering, Drive/Shooting Mode, and More
•	Creates Ad Hoc Wi-Fi Network
•	Effective Range: 150'
•	Works with iOS 4.3, Android 3.2 or Later
•	Mac and Windows Compatible
•	USB Charging & Ethernet Cables Included

Features:
•	Mount Combines Fat Gecko Original & Mini
•	Works on Smooth, Non-Porous Surfaces
•	Three-Point Mount Increases Stability
•	Three Industrial Locking Suction Cups
•	Features Six Adjustable Points
•	Slide & Lock Design Secures Connection
•	Adjusts to Contours of Shooting Surface
•	Features a Standard 1/4"-20 Tripod Head
•	Rubber Washer Dampens Vibrations
•	Supports DSLRs & Camcorders Up to 12 lb

Features:
•	12.6V, 3.8Ah Battery
•	48 Wh Capacity
•	5V USB Port
•	LED Battery Indicator Lights
•	Magnalink Magnetic Connection

Kit contains:
4x Kessler MagPak Batteries
4x Kessler MagPak chargers
3x Barrel to Barrel power cables
1x MagPak Manual
1x Hard Case with handle

Features:
•	For Kwik Release System
•	Arca-Type Compatible
•	Drop-In Instant Latching
•	Push Button Drop-Gate Release
•	Locking Lever for Securing Plate
•	One-Handed Operation
•	Built-In Bubble Level
•	3/8"-16 and 1/4"-20 Mounting Threads
•	Aluminum & Stainless Steel Construction
•	Screws, Washers, & Hex Keys Included

Features:
•	Canon EF mount
•	Aperture Range: f/2.8 to f/22
•	Designed for Cameras with APS-C Sensors
•	Internal Silent Focusing AF Motor
•	One-Touch Focus Clutch Mechanism
•	Two Aspheric Lens Elements
•	Two Super-Low Dispersion Lens Elements
•	Multi-Layer Coating
•	77mm Filter Thread

Features:
•	HDMI Input
•	2 x SDI Outputs
•	Supports SD and HD Signals
•	Automatic Input Signal Detection
•	Software Control
•	Power & Firmware Updates via USB 2.0
•	International Power Supply Included


Features:
•	Compatible with All GoPro Camera Models
•	Capture Headlamp-Like POV Footage
•	Supports Multiple Head-Mounting Options
•	Fully Adjustable to Fit All Sizes
•	Fits on Your Head or Over Your Helmet
•	QuickClip Enables Low-Profile Mounting

I'll only accept requests of this item when it is rented together with one of my GoPro Cameras.

Features:
•	Supports 4K30, 2.7K60, and 1080p Video
•	Capture 12MP Photos at 30 fps
•	Ultra Wide Angle Glass Lens + SuperView
•	Camera Housing Waterproof to 131'
•	Wi-Fi and Bluetooth Connectivity
•	Video and Photo Time-Lapse
•	Protune Mode for Video and Photo
•	One-Button Operation with QuikCapture
•	Auto Low Light and Night Photo Modes
•	Flat and Curved Adhesive Mounts Included

Contains: 
1x HERO4 Black Camera 
1x Standard Housing 131’(40m) 
1x Skeleton Backdoor 
1x Aluminum Housing (pictured in 4th photo; not waterproof)
1x GoPro Rechargeable Battery 
1x Curved Adhesive Mount ($3.50 if used)
1x Flat Adhesive Mount ($3.50 if used)
1x Quick Release Buckles 
1x 3-Way Pivot Arm (Mounting Hardware) 
1x USB Cable

1x LimeFuel Extended battery w/ backdoor 
2x Watson Batteries 
1x Watson Battery Charger 
1x Dive Housing 
1x Lens cover for Standard Housing 
1x 64GB MicroSD card with SD adapter 
1x 32GB MicroSD card with SD adapter

Features:
•	Use with Canon EOS 5D Mark II, 5D Mark III, 7D & 60D

I'll only accept requests of this item when it is rented together with one of my Canon Batteries or Cameras.

Features:
•	Dual Support Rail Design
•	Aluminum Jib Arm Construction
•	25 lb Load Capacity
•	Invertible Camera Platform
•	5.5' Fulcrum to Camera Platform Distance
•	Mounts Onto Your Tripod Release Plate
•	Internal Sleeve Bearings

Features:
•	Blocks Environmental Reflections
•	Fits Lenses up to 8" in Diameter
•	Works with Lenses as Wide as 15mm
•	Opening Measures 9 x 10"
•	Suction Cups for Mounting

Features:
•	Provides an ultra immersive perspective
•	Perfect for skiing, cycling, motocross or paddle sports
•	Fully adjustable to fit a wide range of adult sizes
•	The Chesty makes it easy to capture immersive video and photos from, well … your chest. It's perfect for skiing, mountain biking, motocross, paddle sports or any activity where you want a more engaging, lower-than-the-helmet view of the action. You'll capture more of your arms, knees, poles and skis while skiing—and more of your arms and handlebars while biking or riding your motorcycle. Fully adjustable to fit a wide range of adult sizes.

I'll only accept requests of this item when it is rented together with one of my GoPro Cameras.

The Digital Control Center (DCC) represents the latest innovation of the Kessler motion control product offering. Similar in concept to the previous generation of analog controller, Oracle, the DCC brings real-time manual control via a joystick to CineDrive.

The DCC can control up to 6 axes, 3 of them simultaneously and all 6 via a toggle button. Whether controlling CineDrive completely manually or interacting with specific axes within an autonomous move, the DCC provides flexibility in control for various shooting environments. One great example of this is that users can now manually pull focus during a pre-programmed move, thus allowing operators to more organically interact with the subjects they are filming.

Users can pair joystick control with the extremely popular Second Shooter and Second Shooter Plus platforms. Also, users can control the Digital Revolution Head with the DCC. This combination is ideal for crane and jib use and is a system that can handle rigs up to 20 lbs.


Pair with the Digital Revolution Head kit (https://www.sharegrid.com/chicago/l/29732) for use on a crane or slider!

Features:
•	Compatible with Canon EOS 5D Mark II, 5D Mark III, 60D, 70D, 6D, 7D and 7D MII Cameras

Features:
•	Compact Design
•	Adjustable Condenser Mics
•	Records to SD/SDHC Media
•	WAV/BWF and MP3 Recording
•	XLR and 1/4" Combo Inputs
•	Phantom Power
•	USB 2.0 Connector
•	Integrated Speaker
•	3.5mm Headphone/Line Output
•	Battery, AC, or USB Power

The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly. You can also use our proprietary expandable rail system. The Shuttle Pod™ has multiple optional camera mounting options available, using the Cheese Plate and 100mm Bowl Mount inserts.
The Shuttle Pod™ is completely smooth and silent and can even be removed and used as a table top dolly, by rolling on a smooth surface.

System includes:
2x 4' Track pieces
2x 2' Track Pieces
2x Outrigger Feet/End Braces
1x Hard Case
1x Cross Brace
2x Short Couplers
1x 100mm Bowl Tripod Mount
1x Cheese plate
1x ShuttlePod Carriage
1x Pair of Keeper Grabber wheels
2x Tripods for support

Can be paired with any of my motorized Motion Heads:
https://sharegrid.com/chicago/l/29732 (3 Axis Kessler Second Shooter Kit)
https://sharegrid.com/chicago/l/29588 (3 Axis Dynamic Perception Stage R Kit)


Features:
•	OM System ZUIKO Auto-Zoom
•	Hard Case, Caps and Built-In Hood
•	Olympus 75-150mm
•	Constant f/4 Zuiko Two Touch Zoom

A Fotodiox adapter for Canon EF lens mounts is included.

Features:
•	18 MP APS-C CMOS Sensor
•	DIGIC 4 Image Processor
•	3.0" 1.04m-Dot Clear View Vari-Angle LCD
•	Full HD 1080p Video Recording at 30 fps
•	9-Point AF with Center Cross-Type Point
•	Native ISO 6400, Extended to ISO 12800
•	5.3 fps Shooting for 58 JPEG or 16 RAW
•	63-Zone Dual Layer Metering Sensor
•	In-Camera Editing and Picture Styles

Features:
•	SD/HD/3G-SDI Input
•	HDMI and SDI Loop Outputs
•	Supports SD and HD Signals
•	Automatic Input Signal Detection
•	Software Control
•	Power & Firmware Updates via USB 2.0
•	International Power Supply Included

Features:
•	Supports 1080p60 / 1440p30 (4:3) Video
•	Capture 8MP Still Photos
•	Ultra Wide Angle Glass Lens + SuperView
•	Waterproof to 33'
•	Control with GoPro App or SmartRemote
•	Time-Lapse and Photo Burst Modes
•	Auto Low Light + Protune Mode for Video
•	One-Button Operation
•	Standard Frame for Mounting
•	Flat and Curved Adhesive Mounts Included

It comes with:
1x HERO4 Session Camera
1x Standard Frame
1x Low-Profile Frame
1x Curved Adhesive Mount
1x Flat Adhesive Mount
1x Ball Joint Buckle
1x Mounting Buckles + Hardware
1x Micro-USB Cable

1x 64GB MicroSD card
1x Neoprene case with drawstring

Features:
•	Compatible with All GoPro Camera Models
•	Works on Cars, Boats, Motorcycles & More
•	Adjustable Arms for Compact Mounting
•	Mount Proven at Speeds of 150+ mph
•	Includes Standard & Quick Release Bases
•	3.4" Diameter Suction Cup

NOTE: This item must be rented with one of my GoPro cameras.


Features:
•	Locking Knob
•	Requires Super Clamp or Base
•	Replaces #2929

Includes:
2x Manfrotto Super Clamp (Mafer)
1x Kupo Camera Bracket (also used to connect two Magic Arms together or hold flags, nets or silks)

Convert HDMI to SDI or vice versa. Comes with a 25' SDI Cable, so you can connect your HDMI only camera to your HDMI only monitor over long distances that HDMI won't carry a signal for.

Kit includes:
1x Blackmagic Design Micro Converter SDI to HDMI
1x Blackmagic Design Micro Converter HDMI to SDI
2x Micro USB - Type A cables
2x USB Batteries
2x Mesh Battery pouches
1x 25' SDI Cable
1x Plastic Mesh Carry Bag

Features:
•	C-clamp for Altman Pars, Scoops, Sky Cyc, Q-Lites, Strips
•	It adjusts to pipe diameters 0.75" - 1.5", and includes a 0.5"-13 fixture attachment bolt.

The Olympus 50mm ƒ/1.8 manual focus lens is no longer in production, but was the standard lens of the Olympus OM camera series, employing a design using six elements in four groups.

In moving to digital, Olympus has abandoned the original OM mount, adopting instead the four thirds standard (and micro four thirds standard) for its digital camera bodies. However, Olympus has made available the MF-2 lens adapter, which allows OM lenses to be fitted to a micro four thirds digital camera. With this system in place, we have tested this vintage lens on the Olympus EP-1.

Includes an adapter for use on Canon EF mounts.

Matthews C Clamps are available in 4", 6", 8", 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.

Features:
•	Load Capacity: 19.8 lb
•	Max Height: 66.9"
•	Min Height: 3.5"
•	Folded Length: 21.3"
•	Leg Sections: 4
•	Weight: 4.6 lb
•	Quick Power Leg Locks
•	90° Center Column
•	Easy Link Attachment
•	Rotating Bubble Level

This item is legs only and does not include a tripod head.

Features:
•	Assists in creating panning time-lapse videos or panoramic still shots.
•	Has metal tripod (1/4"-20) adapters on top and bottom.
•	Spins up to 360-degrees over an hour of time.
•	New mechanism supports a center-weighted camera up to 5 pounds!
•	Creates incredible B-Roll alternate shots for your videos and movies.

The brain of the Second Shooter system, the Kessler Crane Second Shooter Controller lets you connect the system's slider, pan, and tilt axes via Cat5 cables and control them remotely.

This is the original Second Shooter with one expansion port and no WiFi connectivity.


Features:
•	Connect and Operate Slider, Pan, Tilt, Focus, Zoom

Includes AC Power adapter, 16" RJ45 Bridge cable, and USB cables

Features:
•	Fixed-Charge Condenser
•	Line + Gradient Polar Pattern
•	Operates on Phantom Power or AA Battery
•	Frequency Response: 40 Hz to 20 kHz
•	80 Hz Low Frequency Roll-Off
•	Sound Rejection from Back and Sides

The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly. You can also use our proprietary expandable rail system. The Shuttle Pod™ has multiple optional camera mounting options available, using the Cheese Plate and 100mm Bowl Mount inserts.
The Shuttle Pod™ is completely smooth and silent and can even be removed and used as a table top dolly, by rolling on a smooth surface.

Shown with optional 3 Axis Motion Control Kit:
https://www.sharegrid.com/chicago/l/29588

System includes:
2x 4' Track pieces
2x Outrigger Feet
1x Hard Case
1x Cross Brace
2x Long Couplers
1x 100mm Bowl Tripod Mount
1x Cheese plate
1x ShuttlePod Carriage
1x Pair of Keeper Grabber wheels
3x Tripods for support

Can be paired with any of my motorized Motion Heads:
https://sharegrid.com/chicago/l/29732 (3 Axis Kessler Second Shooter Kit)
https://sharegrid.com/chicago/l/29588 (3 Axis Dynamic Perception Stage R Kit)

Features:
•	Comfort and Control in Vertical Position
•	Vertical Position Shutter Release Button
•	Vertical Position Control Buttons & Dial
•	Extends Shooting Time
•	Holds Two LP-E6 Batteries
•	Also Works with 6 AA Batteries
•	Accepts ACK-E6 AC Adapter Kit


Features:
•	EF mount; standard zoom lens; Comes with Lens Cap E77U, Rear Lens Cap, Lens Hood EW-83F, Soft Lens Case 1219.
•	Ultra-low Dispersion glass with Fluorite elements; inner focusing ring; full-time manual focus; aspherical lens
•	24-70mm focal length
•	f/2.8 constant maximum aperture
•	UltraSonic Motor (USM) AF actuator

Note: this is the 24-70 Mark 1. 77mm front ring

Features:
•	Power Camera for Extended Period of Time
•	World Wide Use 100-240V 50/60Hz AC
•	AC Adapter/ Power Cord/ DC Coupler, Cord

Compare to Canon ACK-E6 AC Power Adapter Supply Kit For Canon EOS 5D Mark III


A very compact lens with retrofocus construction and beveled lens edges to trap potential flare before it reaches the film. Resolution, contrast and color reproduction are outstanding. This lens is particularly convenient when traveling.


A Fotodiox adapter for Canon EF lens mounts is included.

Features:
•	32GB Capacity
•	Class 10 - UHS-I
•	Max. Read Speed: 60 MB/s
•	Max. Write Speed: 25 MB/s
•	Built-in Error Correcting Code (ECC)
•	Limited Lifetime Warranty

Includes (3) Transcend 32GB SD Cards and waterproof case

Features:
•	Aluminum Alloy Tripod Legs
•	3/8" Half-Ball Adapter
•	Padded Carrying Case
•	66.5" Max Height
•	Legs Spread Out Low to Ground
•	77.2 lb Max Load
•	Three Leg Sections with Twist Locks
•	3/8" Thread Underneath Removable Feet
•	1/4" and 3/8" Accessory Mounting Threads
•	Foam Carry Grips


Includes a soft carry case and half bowl mount but no tripod head.

Features:
•	32GB Storage Capacity
•	Read Speed up to 120 MB/s
•	Write Speed up to 85 MB/s
•	UDMA 7 Compliant

The Pentax SMC P-FA 28mm f/2.8 AL wide-angle lens offers outstanding flexibility and is ideally suited for architectural and landscape photography. It features an aspherical lens element to help transmit the light more efficiently through the lens to the film. Compact and lightweight, it measures 2.5" x 1.6" and weighs a mere 6.5 ounces. Like all Pentax lenses, the SMC P-FA 28mm f/2.8 AL is treated with the acclaimed smc coating for maximum light transmission, sharp definition, and high contrast while minimizing flare and ghost imaging.

Features:
•	Pentax K Mount
•	60mm (35mm Equivalent)
•	Aperture Range: f/2.8 to f/22
•	Compact Pancake-Style Design
•	High-Grade Multi-Layer HD Coating
•	Super Protect Lens Coating
•	Quick-Shift Focus System
•	Nine-Blade Diaphragm

The Kenko 67mm – 77mm Step-Up Ring allows you to use 77mm threaded filters on a lens with a 67mm filter thread. Adaptor rings serve to accommodate filters, close-up lenses and other attachments to lenses with different filter thread sizes.


Features:
•	For Kwik Release System
•	Designed for Large Camera Systems
•	Length: 6"
•	Arca-Type Compatible
•	Mounts Using One or Two 3/8"-16 Screws
•	Multiple 1/4"-20 and 3/8"-16 Threads
•	Safety Screws
•	Includes Hex Key


Features:
•	480GB Storage Capacity
•	550 MB/s Sequential Read Speeds
•	515 MB/s Sequential Write Speeds
•	SATA 3 Interface
•	Enhanced Shock & Vibration Resistance
•	Low Latency
•	SSD Dashboard
•	Energy-Efficient Operation

Features:
•	52mm Lens to 77mm Filter Size
•	Adorama Step-Up Adapter Ring

Features:
•	Ideal for premium Android based smartphones and tablets
•	Up to 80 MB/s transfer speed, Comes with SD adapter for use in cameras
•	Class 10 for Full HD video recording and playback
•	Water proof, temperature proof, shock proof, X-ray proof and magnet proof


The Manfrotto 035RL Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps.
The Super Clamp can be securely mounted on any tube from 0.5" to 2.1" and is supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Also check out our Manfrotto Magic Arms that comes with two of these clamps:
https://www.sharegrid.com/chicago/l/46865
https://www.sharegrid.com/chicago/l/29783


This items only rents out with orders over $25.

The Pentax SMC P-FA 135mm f/2.8 IF is a great portrait lens as it allows a comfortable distance between the photographer and subject. It allows for a shallow depth of field and is ideal for working in low-light conditions. It features an internal focus system to make focusing smoother and faster, and is treated with the acclaimed smc coating for maximum light transmission, sharp definition, and high contrast while minimizing flare and ghost imaging.

A Fotodiox adapter for Canon EF lens mounts is included.

Features:
•	64GB Data Storage Capacity
•	800x Speed Rating
•	Max. Read Speed: 120 MB/s
•	Max. Write Speed: 60 MB/s
•	UDMA 7 Compliant

The K-Plate is a Kwik Release plate and all-around mounting solution designed to help keep your accessories organized. Built with CineDrive® in mind it provides the compact mounting needed to organize tools such as monitors, audio equipment, CineDrive® focus and zoom motors and much more. Its wide footprint with rubber-tipped feet allow for stable table-top mounting and its array of threaded holes provide near infinite customization. Add to the fact that it accepts 15mm rods and can include an optional side-mounted cheese plate and the K-Plate delivers incredible versatility.

Features:
•	Use Any 1/4"-20 Tripod or Support
•	Fits Virtually All GoPro Housings/Frames

This items only rents out with one of my GoPro cameras or orders over $25.

Features:
•	For Kwik Release System
•	Attaches to Cameras & Accessories
•	Length: 3.5"
•	Arca-Type Compatible
•	Mounts Using 1/4"-20 or 3/8"-16 Screws
•	Multiple 1/4"-20 and 3/8"-16 Threads
•	Safety Screws
•	Includes Hex Key

For mounting 100mm ball tripod heads to Kessler Cranes and sliders

*Kessler 100mm Ball relocator

*Four bolts, washers and wing nuts.

The Digital Revolution Head brings the latest in digital motion control technology to a proven Kessler platform that can accommodate rigs up to 20 lbs. Ideal for cranes and jibs as well as able to be tripod or slider mounted, the Digital Revolution Head can be mounted over or under-slung to provide dynamic pan and tilt camera movement in a variety of shooting environments. 

Kit includes:
1x Digital Revolution Head
1x SecondShooter Controller
3x MagPak Batteries and Chargers
1x SecondShooter Slider Motor
1x Hard Case

The Kessler K-Pod™ is a heavy-duty tripod equipped to handle mounting cranes, sliders, jibs and tripod heads. With a load capacity of 500 lbs what you choose to mount is limited only by your imagination, not the size of your rig.

Weight Capacity: 500 LBS 
Physical Weight: 22 LBS 
Dimensions: 58.5" x 9" x 9" 
Folded Dimensions: 39" x 10.75" x 10" 
Maximum Height: 64" 
Minimum Height: 37"

Tripod comes in a hard plastic carrying box.
_______________________________________
The Kessler Hercules Head 2.0 is an ultra strong, solid aluminum pan / tilt head designed specifically for use with the Kessler Crane. The Hercules 2.0 now has panning drag control making it is an excellent head to mount your camera to when used in conjuction with our Kwik Release system and when not using your crane.

Multiple Mounting Options
Mounts to your tripod using a 100mm levelable ball mount, 75mm fixed ring mount, or a flat mount. 

Vertical Lock
Features a vertical pin lock that locks out vertical tilt so that the Hercules Head can be used like a Fluid Swivel.

Adjustable Control
The adjustable handle on the Hercules Head provide custom grip positions so for each application users can pinpoint the most comfortable feel and control.

Kit contains:
1x K-Pod Tripod
1x Hercules 2.0 Head with cup and handle
3x All Terrain Tripod Wheels
3x Platform Leveling Feet
3x Spike Feet
1x Hard Tripod Case
1x Hard case for Head and accessories

Features:
•	Compatible with Canon EOS 5D Mark II, 5D Mark III, 60D, 70D, 6D, 7D and 7D MII Cameras

Includes:
3x Canon LP-E6 batteries
1x Canon LP-E6 charger
1x soft carry bag

The Ikan V5600 is a 5.6" HD LCD Monitor has a crisp 1024 x 600 resolution panel, making it great for framing on a jib or bike mount. I would not count on this monitor for critical focus, color, or exposure.

1024 x 600
NTSC/PAL
HDMI input, no output.
16:9/4:3 Switchable

Included:
1x Ikan V5600 HDMI Monitor
1x Panasonic Battery Plate
2x Panasonic Batteries
1x AC Power supply
1x Giottos Mini ball head

SanDisk 128GB Extreme Pro UDMA 7 CF Card

Description

Location

Item lent by Nate B Bartlett

Other items from Nate B Bartlett

FAQs

SanDisk 128GB Extreme Pro UDMA 7 CF Card

Explore other options around Chicago