*Also available with BALLOON TYRES (see separate listing)

A rickshaw allows the operator to get fast, smooth shots without the need or cost for a tracking vehicle. You're only limited by the speed of the person pulling you. Whether you're using a Steadicam, shooting handheld, or on a gimbal, this will help you stabilise fast shots and remove the fatigue normally experienced when trying to achieve these shots.

For Gimbal, handheld & Steadicam use
Lightweight compact design
Hard anodised for durability
Fast Tools Free setup
Jockey wheel for precision tracking
Two wheel fast mode
Extending axle for stability
Adjustable footrests
Camera accessory mount for mounting stabiliser systems
Quickly packs into one case

Kenyon 6x6 gyros provide rock-solid stability for cameras or Steadicams in challenging situations. By spinning up to very high RPM's, the four solid masses create powerful gyroscopic stability.

These can be attached to GPI Pro HD steadicam rigs  via custom built bracket or can be attached directly to a camera with 3/8 screws and a mounting plate.

They come with an inverter to allow battery power to be used, an XLR cable to power from a camera floor battery, and with Limo cables to power from a v-lock adapter.

Gyros are heavy, but they work well, especially with a handheld setup and an easyrig on a vehicle or rickshaw.

 Fixed axis dolly rig: for straight and level truck and dolly shots. Maximum payload 250kg. Can easily support rigged camera or operator with camera.  Tripod, gimbals available. Large Pneumatic wheels absorb vibrations on the surface where typical dolly wheels would transport distortion to the camera. Ideal for truck/ dolly shots on interior floors, roads and any hard flat surface. No tracks means you get a clear smooth dolly shot without the fuss and tedious set up. A fixed axis means no steering off course. Keeping the shots continuity. The side bars allow modifications for builds. Tow ropes and handle allow aid of crew to push or pull the truck for the shot. The system is also tested for durability and silent manoeuvre. 

TARION TR-SD60 slider dolly stabilizer system is specially designed for stable continuous filming. It can be widely used on all kinds of professional camcorders, SLR, DSLR cameras, etc.


TARION TR-SD80 80cm 31" Track Slider Stabilizer Stabilization System with Portable Case for DSLR Video Camera Camcorder Canon Nikon

Adopts 4 adjustable low-resistance roller bearings, higher load-bearing, more smooth and stable. Equipped with standard ARCA SWISS groove, perfect for being directly installed on ball head, no quick-release plate needed.
Scientific and unique design on both ends, block the slide plate and prevent it from impact and scratch. Upgraded ends design bring a maximum use of the track length.
Integrated brake screw design, more efficient and can decrease friction. A rubber pad part on slide plate, anti-slip and shock resistant.
Slide plate support both 1/4" and 3/8" interface for versatile usage. Extra 1/4" and 3/8" interface on both ends, easily fixed on tripods.
Adjustable feet for ideal shooting height.

x 1 MYT Works Small Glide Slider 3ft. Rail length - 75mm Bowl
x 2 Slider Supports                                                     
x 1 Slider Bag

Based in Stoke Newington, not far from Shoreditch area in East London.

I am a London-based TV Producer/Director looking to rent out my equipment while I'm not using it. The kit is all is prefect working condition and the camera was serviced just before its last use.  

I'm very flexible with pick ups and drop offs between 6:00am-11.00pm, Monday-Sunday at my flat.

Twice as original sliding distance, conceptionally retractable.
50cm track, 100cm actual sliding distance, load up to 8kg.
Super smooth transporting belt and track design.
Qualified aviation aluminum alloy, CNC technics, preciser and more stable.
1/4" and 3/8" screws built-in the top for connecting with camera or ball-head.
1/4" and 3/8" thread holes built-in the bottom for connecting with tripod.
Built-in gradienter helps you find the balance quickly.

Manfrotto Camera slider 60cm with MVH500AH Video Head MVS10

Konova Slider K5 
Comes with one ball head

A complete automated Edelkrone Slider System

edelkrone SliderPLUS Long - 21"
edelkrone HeadONE Remotely Controlled Motorised Pan System
edelkrone Slide Module v2 for SliderPLUS
edelkrone FlexTILT Head 2

Perfect for adding movement to time-lapses or automating precise slides.


 One Man Crew Director™ is a motorized slider with a unique parabolic curve that transforms your static shots with beautiful cinematic motion. Dramatically improve interviews, documentaries and any talking head videos, all without a dedicated operator.

Carry case, power supply and battery included.

Check here for specs.https://shop.redrockmicro.com/product/one-man-crew-director-2/

Glidecam HD 4000

Handheld Camera Stabilisation System for Cameras Weighing 1.8-4.5Kg (4-10lb)
comes with 10 weights in total . you can put 5 weights on each side depends on the size of your camera and lens and how many accessories on top. 

FREE BALANCE SETUP 

*****REMINDER HIRE***** 
- All items are subject to a 24HR rental time. From the time the item was arranged from pick. Any late returns will subject to an extra full day rental charge automatically unless arranged a suitable time with lender before hand. 

 Ronford Baker 2ft (24”) slider. Moy fitting. Compatible with all Moy / Mitchell heads. 

Edelkrone Sliderplus Slider Medium

Discounts available for longer rentals.

Pick up location is in West London 5 min walk from Perivale Station. Any other enquiries or if you want other film equipment for hire, please check my profile.

Konova K5 Slider

Perfect for getting steady shots 
Use with a flat head or ball head mount for larger cameras
Most DSLRS will mount directly onto the plate here 


 Slider for professional camera use. Can be Tripod mounted. For smoother and elegant shots

Edelkrone Slider PLUS Long, Slide Module + Pan System & Tilt.

This system allows the user to simultaneously slide and pan a camera across 2 axis. This is all controlled by the very easy to use app.

The Slider can be rented in a package with an appropriate tripod to hold and counter-balance, please ask if interested.

HAVE NOT HAD TIME TO TAKE PHOTOS YET

Neewer 47.2 inches/120 centimeters Aluminum Alloy Camera Track Slider Video Stabilizer Rail with 4 Bearings for DSLR Camera DV Video Camcorder Film Photography, Loads up to 17.5 pounds/8 kilograms

GVM (GP80QD-II) Camera Slide 31” Motorized DSLR Camera Track Dolly Slider Video Stabilizer Rail with Time Lapse Tracking and 120-degree

Comes with protective case (as pictured) and 2 NP batteries to keep you powered. Optional hard-case if needed. 

Full list of items include:

1 x motorized slider
1 x controller
2 x battery
1 x battery charger
1 x controller connection line
6 x shutter links - these should cover most DSLRs 
1 x shutter extension line
1 x Carrying Bag 

Additional cables and power available on request. 

As new, silky smooth manual slider, with adjustable feet, inbuilt spirit-level and protective case. Should mount directly into the DSLR/Video (or similar) base and/or with a tripod ball-head for additional control. 

Very nice slider for very smooth movements . No scratches!

Kanova P1 slider with S2 Automatic motion slider 80CM in length. Very easy set up slider. Set two end points and slide away. Happy to show you if you need. Very easy to use. Includes battery and power cable.

The lil-mule time lapse camera dolly is an intuitive, heavy duty camera dolly for creating arced or linear camera moves when shooting time lapse or video.  More flexible than a slider.

Have a look at http://www.lil-mule.com or https://ksr-video.imgix.net/projects/376052/video-191809-h264_high.mp4 to see what it can do.

Includes 3 different speed motors and speed adjustment but can also be used manually without the motor engaged.  Complete with magic arm and camera tripod mount.  Alternatively a tripod head can be mounted directly to the Lil-Mule or tripod extension bar.

Includes 2 12v batteries (regular and large) and battery charger. Batteries will be charged on collection.  The movement arc is adjusted with the centre front wheel.  Linear movement uses 4 wheels, one in each corner.

120cm Neewer Slider in great condition with an additional ball head mount that I purchased separately but works brilliantly!
Slider comes in its own carry case.

Neewer Slider add's an effective dolly effect to your shots. 

Smooth footage achieved. This can be mounted to a tripod.

Neewer Spider Stabiliser operates with no batteries to still achieve smooth footage. It is handy and compact.

It offers great use on set, when travelling as it comes in a case and is quick and easy to find the balance. 

XSOURCE slider 80cm, ball head and carry bag. Lightweight, ideal for DSLRs, BMPCC

PLEASE ASK FOR AVAILABILITY BEFORE BOOKING 

Kit includes:

• YC Slider
• Andoer Ball Head
• Carrying Box

The slider's full range of motion when mounted on a tripod is 30cm and it can hold up to 20kg. Very sturdy build, yet a super compact size. 

30 inch Duzi 4 Camera Slider from Cinevate.

- Supports up to 45kg loads
- Offers smooth and consistent slides for even lighter cameras thanks to the flywheel.
- Flywheel adds inertial dampening, providing a degree of resistance that allows for more control.
- Flywheel also brings about better stability and precision.
- Roller-bearing slider made of hardened aluminum and stainless steel, and featuring solid carbon fiber rails
- Micro adjusting urethane ball feet, including two for center-mounting
- Integrated bumpers on end blocks
- Integrated bubble level
- Eight precision roller bearings
- Center and side-mounting tripod options
- Lock easily secures the camera anywhere on the rails

Manfrotto 502 Video Head

- With flat base features variable fluid drag system for pan and tilt movements that's cleverly incorporated into the design.
- Maximum payload of 7kg
- Fixed counterbalance system of 4 Kg

New to Fat Llama? Create an account with my referral link for a £20 credit: https://fatllama.com/r/fras-d1ecd 

DISCLAIMER: I only rent to fellow professionals with a clear profile photo and portfolio website link which displays their contact information on it. On collection, I will take a picture of you and your ID before I release the equipment. Only the person on your profile can collect and return. I charge for the duration of your shoot i.e. if you need to rent for a Saturday and Sunday production, I would allow you to collect on Friday evening and return on Monday morning.

As a freelancer, my schedule can be unpredictable. Before booking, get in touch to make arrangements.

The Sachtler spider dolly allows you to quickly and easily add movement to your shots. 

Original Wally Dolly - the best portable dolly out there. 
Wally Dolly T Section
9ft (3m) Track/pad 
2 End Stops
Cleaning Cloth
Kit Bag
Works with most tripods, or happy to lend you compatible Miller 1514 DS20 carbon tripod.  

The Shark S1 slider is the perfect slider for light to medium camera setups. With the option to extend the track to 2m it is a very versatile slider allowing you to achieve great cinematic shots. Slider comes with a Manfrotto head and the flight case with wheels for easy transportation.

Turns your tripod into a dolly. Takes light and heavy metal tripods.

ENQUIRE BEFORE BOOKING

Grab £20 off your first hire! Click below!
fatllama.com/r/sam-8fb9a7

All in one
We took the best parts of our high end gear and created a portable, beautiful, motorized slider. Using a high-strength aluminum extrusion as it’s backbone, RŌV Pro is lightweight and extremely portable. It looks damn good too.

Insanely Fast Setup
RŌV Pro includes an integrated quick release ball-head that allows you to setup your slider and camera in seconds. The built in legs allow you to position your slider anywhere without needing a tripod.

App Controlled
RŌV Pro is fully motorized and seamlessly pairs with your phone to control its movement. Have full control of your camera’s movement in the palm of your hand.

Easily Capture Epic Time-Lapses
Ditch your bulky gear without compromising quality. RŌV Pro has an integrated 2.5mm port for triggering your cameras’ shutter during a time-lapse. Getting a time-lapse has never been easier with the built-in intervalometer.
*A shutter release cable is not included and can be purchased separately.

Holy Grail Time-Lapse
Capture day to night time-lapses with RŌV using Lightlapse (iOS app).

RŌV Pro Motorized Slider
-Access to the Lightlapse app
-Access to the Rhino Time-Lapse Lightroom plugin
-Access to the Rhino Time-Blender Photoshop script
-Interchangeable RŌV Quick Release Ball-head
-Interchangeable RŌV Smartphone Mount
-Smartphone Variable ND filter

**** Listed by a professional, London based freelance DoP so you can expect gear handed over in pristine working condition. This is all my own personal equipment and as such, it is treated with a great deal of care. 24hr phone assistance to all hirers of my kit.****

The Manfrotto 114 Video Dolly is a very sturdy dolly, designed for use with universal and heavy duty tripods. It has large 127mm wheels with individual brakes and cable ducts. Easy to assemble and disassemble. Can be folded for transport.

For universal and heavy duty tripods
With cable ducts and brakes
Foldable for transport
Weight: 8 kg
Carrying weight: 60 kg
Door width: 112 mm
Colour Black
Material: Aluminium

 Manual slider 40cm - location on Wandsworth High street. Any questions please don’t hesitate to get in touch. 

 ood condition

The 39.4" long Konova K2 Slider supports loads up to 39.6 lb and features roller bearings that provide smooth, stable, and quiet operation. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track and positioned at the center and at either end. Additionally, there are threaded holes at the sides of the slider that enable you to mount it vertically, for expanded creative possibilities. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet that screw into the sides of the slider are included.

This ex BBC, portable Vinten Pedestal is great for any size camera. It can be used instead of a dolly for tracking shots on smooth floors. Its steerable wheels make it extremely manoeuvrable in the tightest of spaces. The built-in pneumatic boom allows vertical movement or can simply be locked off to a desired height setting. It's quickly folds up and breaks down into 2 easily manageable sections which can fit into the tightest of trunks. Designed for use with 150mm Vinten "Quickfix" heads or heads adapted with a "Quickfix" ring. Can be rented in conjunction with our Vinten 250 head.

Camera not included.

Konova K2 120cm Slider Kit

This little kit would be a fantastic addition to any DSLR shooting package. I have found this slider to be the best of the entry level DSLR range. The motion is exceedingly smooth and the build quality is excellent.

Included is:

Konova K2 120cm Slider
Konova Slider Feet
Slider Carry Case
Manfrotto 128LP Video Head W/ Pan Bar
Manfrotto Style Quick-release Plate and Base Plate
Bilora Tripod

Evening and weekend pick-up is preferred but day pick-ups can also be arranged.

Please message me if you have any questions. I have used this slider a lot myself so please ask if you have any operational questions.

The Glide Gear DEV 235 Slider was developed to allow anyone the ability to create Feature Film quality production shots within a reasonable budget. With aircraft grade, heavy-duty, CNC machined with tight tolerances, precision extruded industrial grade anodized aluminum construction, self-lubricating glide rails, spirit level & adjustable removable feet, the DEV 235 provides more bang for your buck than any other slider on the market in it's price range. The DEV 235 Slider can be used as a stand alone unit with the detachable feet, or you can even attach it directly to your tripod.

3-day minimum hire required (not including pick up and return dates).
You get 3 full days with the kit and you get half-day before and after your booking to return the kit.


Example hire:

Pickup Sunday between 1pm-8pm
Hire and use Monday, Tuesday, Wednesday
Return Thursday 12pm (midday latest)

Unfortunately, after a series of disappointing 1 day hires, that return the kit late; in poor keeping and fail to communicate properly, I will only loan to reliable llamas who need the kit for more than one day.

Motorised slider and panning control with Rhino Arc.
Great for adding movement to interview footage and for time-lapses. AC power only. 
This slider isn't powered by batteries.

- Rhino Slider Pro 42” aluminium rails
- Rhino Arc
- Manfrotto tripod head (+plate) to mount to the Rhino Arc
- Manfrotto tripod and head for centrally mounting the slider for elevated shots.
- 2 x mono
 pods for supporting the ends of the rails to prevent the movement of the carriage bending the rails.

Watch the video:
https://www.youtube.com/watch?v=i82iIR1RxKU

How to use it:
https://www.youtube.com/watch?v=vcYaezoVCMQ&feature=youtu.be

Load Capacity: 22.7kg
Recommended Support: Manfrotto 546B or 132XNB
Tripod Mounting: Center and Ends

Rickshaw - for steadicam, handheld, gimbal or easy rig work

Description

Location

Item lent by James

Other items from James

FAQs

Rickshaw - for steadicam, handheld, gimbal or easy rig work

Explore other options around Hayes