When LED lights just won't give enough output or absolute colour fidelity (CRI 99+) is a must then Tungsten lighting is still the way to go.

This listing is for 1 off Arri 2000 Plus Lamp head, commonly referred to as 'Blondes'
(2 are available)

This is the redesigned and updated Plus version of this 2Kw Fixture.

2Kw of high CRI tungsten light for blasting through diffusion frames, or bouncing off ceilings .
ARRIMAX reflector and optical system for increased light efficiency and light distribution is improved significantly 

The aluminum housing is more compact and about 400g lighter than the previous model.

Disc brake technology borrowed from the ARRI True Blue range holds the light steady even with heavy accessories attached.

In order to change bulbs no screws have to be removed and no tools of any kind are needed. 

Supplied with Barn doors and 13amp plug fitted.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.


Ninebot Segway ES2 Electric Scooter with additional battery pack extending the range to approx 28 miles and increases the top speed to 18.6 mph. Scooter lock and charging unit  included. 
I believe these scooters are not legal for use on UK Roads and pathways.

Ideal for use around warehouse, set locations, exhibition areas and Parks.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34  to see a list of other Power, Medias & Misc items available.

Samyang 6 Piece VDSLR Cine Lens Set Kit (14/24/35/50/85/135mm) EF Mount.

Lenses also available individually at £12 per day (without follow focus)
Please message me for custom quote.

All lenses are T1.5 with the exception of the 14mm (T3.1) and the 135mm (T2.2)

Lenses are supplied in a custom moulded case with the exception of the 135mm which will be supplied with a separate case. A tilta follow focus unit for 15mm rod mounting is also included with the lens set.

All lenses have a 77mm front thread with the exception of the 14mm wide angle lens which due to its large front element cannot accept a filter and the 85mm which is 72mm Front thread.

The lens set is EF mount. If you wish to use the lens set with either Sony e-mount or Micro four thirds cameras I will supply at no additional cost one of the following lens mount adaptors....

Viselex ND throttle EF - E
Viselex ND throttle EF-MFT
Commlite EF-E

Please specify which one you require when ordering.

All Lens hires inc complimentary Zeiss Lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 





Veydra Mini Primes 4 set for Micro four Thirds

Lenses also available individually at £15 per day. Please message me for a custom quote.


Great Pro lens set with stunning picture quality for any Panasonic, Blackmagic, Z-Cam or other MFT camera

Set of Veydra Mini Primes 16mm/25mm/35mm/50mm

Resolves 4k+ resolution  

Smooth manual aperture  

Cinema standard 0.8 pitch focus and iris rings  

Long 300º focus rotation 

All lenses are T2.2 with 77mm front thread and 80mm OD

Lens set comes with flight case and includes a Tilta follow Focus for 15mm rods and Bright Tangerine Misfit Atom 2 stage matte box & top flag (15mm Rod mount or clamp on)

Zeiss lens wipes inc with every rental.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 




Red Pro Zoom Lens 18-85mm T2.9

Native PL Mount  (MFT & E-Mount cameras can be facilitated by using either a Metabones PL-MFT adaptor or a Metabones PL-E-mount adaptor which I will supply at a discounted rate. Please message me for details)

The flexible focal range and exceptional optical quality makes for a zoom lens that is both sharp and dynamic.

The lens covers a S35 image area and is ideal for use on any S35 PL cameras as well as Panasonic/ Blackmagic Micro Four Thirds cameras, or indeed any Sony
S35 sensor e-mount camera. 

The Zoom range of 18-85mm covers the most common cinematic lens sizes and removes the hassle of both carrying and swapping out multiple primes during filming.

Supplied in a custom fitted peli case (complimentary  Zeiss lens wipes inc)

Please be aware that this a large heavy zooms lens approx 12in long
Lens front 142mm (I can provide 142-143mm step up ring if required to accommodate standard 143mm matte boxes)
Weight: 4.5kg

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 


Tokina Cinema AT-X 16-28mm T/3 Zoom Lens with Full Frame sensor coverage.
Canon EF/MFT & E-mount

The lens is native EF mount. If you wish to use the lens with either Sony e-mount or Micro four thirds cameras I will supply at no additional cost one of the following lens mount adaptors....  Viselex ND throttle EF - E Viselex ND throttle EF-MFT Commlite EF-E

All lens hire inc 3 off Zeiss lens wipes

NOTE: The lens itself is in pristine A1 condition however the outer front ring has a slight 'ding' in it from clamping a matte box a little too tight. It is barely noticeable and does in no way compromise the lens.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

F&V K4000 Daylight LED Studio Panel Light Set of 3 with A/C adaptors Milk white diffusers and CTO gels for tungsten balancing. (effectively making them bi colour but without the associated light loss)

Color Temperature 5600K / Brightness: 2860lux at 1m / Beam Angle: 50 °

Can also be powered by V-mount Battery (batteries not included)


Custom carry case inc.

Supplied as light head Kit only. Light stands if required are available in my other listings.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Sound Devices 302 Compact Production Field Audio Mixer with Portabrace bag and Sennheiser PX360 headphones.

Mixer to camera audio tails inc. 2m XLR-XLR

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code SN3G22 to see a list of other sound equipment I have available for hire. 

 Zeiss CP.2  5 Lens kit in either EF or PL mount and supplied in custom fitted peli case. Zeiss lens wipes inc.
 
Zeiss CP.2 21mm  T2.9 Distagon Lens Minimum Focus 10"
 Zeiss CP.2 25mm T2.9 Distagon Lens Minimum Focus 8"
 Zeiss CP.2 35mm T2.1  Distagon Lens Minimum Focus 12"
 Zeiss CP.2 50mm T2.1  Planar      Lens Minimum Focus 18"
 Zeiss CP.2 85mm T2.1  Planar      Lens Minimum Focus  3' 3"

These lenses are optimised for S35 sensors (See Zeiss Web site for FOV) but all lenses will cover full frame cinema cameras inc Sony Venice, FX9, Canon C500 MKII & C700,
 Z-Cam full frame and Red Dragon at 6K.

They have Imperial focus marks and 114mm front dia. 

Available individually at £38 per day each. Please message me for a custom quote.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 


2 off Anton Bauer Cine 90 VM V-Lock Batteries
with Hawk-Woods MR2 dual charger.

Each battery include a PowerTap to power auxiliary accessories such as monitors, lights, wireless receivers, and any other 14V accessory.

Each battery delivers 12 amps of continuous power and incorporates Fuse Link technology, which provides protection to surrounding battery cells, preventing catastrophic failure. The battery also features multiple sensors to detect temperature and over-current, ensuring optimal battery performance during use.

The LCD provides extremely accurate run-time information in hours and minutes. When the battery is detached, the LCD screen will show battery life as a percentage of capacity.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Tokina Cinema 11-16 T3, S35 sensor coverage.
you can rent this lens in either a native EF mount or a native MFT mount. If you wish to use with a Sony e-mount camera I will provide the EF mount version of the lens with an adaptor included FOC.

All lens hires inc 3 off Zeiss lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Induro Hi Hat in either a 75mm or 100mm version.
(please specify which size when renting)

I love Induro gear, it's superbly engineered and a pleasure to use. Like the Induro Alloy tripod these Hi Hats are very hard to find now. All my Induro gear was imported from the USA.
As far as I'm concerned this is the best Hi-Hat out there...period! 

Supports anything from a Blackmagic micro to a fully loaded Arri Alexa 
with a 200lb maximum payload.

Takes any 75 /100mm ball head or alternatively screw a 3/8 base plate (manfrotto etc) directly onto the ball adaptor.

Can be set up just about anywhere, Each leg has 3 positions for ultra low shots as well as uneven surfaces. Equipped with rubber pivoting feet, 

Extremely compact when folded and its indispensable. It's just about the only bit of kit I won't go on shoot without. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

CineBags CB40 Hi-Roller
The ultimate camera bag! Take it on your next shoot.

This is a location camera/production case featuring dual wheels with a retractable tow handle. It also includes a shoulder strap with adjustable pad, as well as center and side carry handles for rapid loading.

Inside, there are seven multi-sized dividers that can be configured to suit your gear needs. There's also a laptop compartment and numerous storage pouches. Outside, there's an ID pouch, storage pouch, and dual interlocking top carry handles. Access to the interior is via oversized zippers that open across the full length of the bag. 

The bag contains a bottom rail for ground protection while on location.

EXTERIOR DIMENSIONS
Main Bag: 25.0 x 15.5 x 10.0" 
Laptop Pouch: 20.0 x 10.5 x 1.0" 

INTERIOR DIMENSIONS
Main Bag: 21.5 x 11.0 x 9.5"

Please Note: interior of my bag has light grey partitions for better visibility. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Induro Alloy 8M Video Tripod with 100mm bowl adaptor for use with  either 3/8" threaded or 100mm Bowl heads. great for supporting sliders. Supplied with carry Bag.

I love Induro gear, it's superbly engineered and a pleasure to use. Like the Hi-Hats, these are very hard to find now. All my Induro gear was imported from the USA.
The tripod legs can be spread out to a minimum height just inches off the ground, allowing for applications in both video and photography. Each leg spreads out independently along three position stops. The tie-down knob for the half-ball adapter has a low-profile design that doesn't interfere with spreading out close to the ground. The max load is 77.2 lb and is supported at all heights from minimum to maximum. The max height is 66.5". The tripod legs feature three leg sections that tighten/loosen by twist locks. Pivoting feet at the bottom of the legs can be unscrewed to reveal 3/8" threads. 
1/4" and 3/8" threads around the bowl area allow you to attach accessories such as articulating arms with video monitors. 
The padded carrying case has both shoulder and backpack straps for easy transport and 
the carry grips around the legs are made of comfortable foam (great for cold weather)

Ideal for use with my Manfrotto Q5 Magnesium Ball Head (please see separate listing)

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Ronford Baker F4 150mm tripod Head, medium duty tall legs, spreader and pan bar.

Stunning condition F4 head, serviced by Ronford Baker.

Head is supplied in custom aluminium flight case and legs are supplied in Ronford Baker AVS moulded transit case.

It's not the lightest set-up but whenever I've got the luxury of a camera assist it's my favourite tripod.
I'm renting this at an incredibly low price to give new filmmakers the opportunity to use
this British cine classic ....One for the connoisseur!

4 degrees of damping in pan and tilt
Max load: 35 pounds
Tilt +- 60 degrees
Weight 11 pounds
150mm bowl base

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Lastolite Collapsible Background 1.8 x 2.75m - Chromakey Green.
folds down to just one third of its original size. It can be used in digital video/photography to cut and paste a subject into a background.
If you need to cover a larger area I have two of these available. Listing price is for one.

AL7X53

LG9Y66

Simple but highly effective camera support. Great for hand held work with smaller cameras.
The original and the best, these are oddly enough very rare and nearly impossible to get hold of now.

After years of using the Fig Rig on his award-winning films, British film directorMike Figgis brought his idea to Manfrotto.
A circular frame with a crossbar to mount most small cameras, the Fig Rig becomes part of the body to produce smooth, steady travelling shots. It is this very fact which is the secret to the Fig Rig. As the operator walks, his/her muscles and tendons absorb all the shocks, transferring only fluid movements to the camera. As there are no straps or harnesses attached to the Fig Rig, quick and wide movements can be made within the same shot – from ground-level to overhead, in one smooth movement. The camera, accessories and operator become one, allowing you to film scenes quickly and unobtrusively. With the Fig Rig your creativity is virtually limitless.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Secced Ares 3 Fluid  100mm Fluid Head and carbon fibre tripod legs.

Ideal for lightweight cinema cameras (Canon C series, Sony FS cameras, URSA 4.6K, etc)
Whenever I need a lightweight tripod this is the one I use. These operate and have a similar look to a Sachtler but at a much more reasonable cost.
The 100mm fluid head takes 5-10kg and the 3 stage Qwik-Lok carbon fibre legs and spreader are lightweight and quick to operate.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Vinten Vision 100mm Tripod head with Secced Carbon Fibre tripod legs and spreader.

This is the newer Vision 100 grey head with the innovative TF drag system. Following the action is effortless even at the heaviest drag setting.
The Vision 100 also includes illuminated drag controls and a digital counterbalance readout, ensuring simple and repeatable camera set-up in any situation.

Tilt Range	±90°
Ball Base	100 mm
Pan Bar	Single telescopic
Camera Fixing	Two-way sliding plate with 2 x 3/8 inch camera fixing screws
Levelling Bubble	Illuminated
Drag Knobs	Backlit and calibrated
Counterbalance	Fully variable with digital readout
Capacity Range	7 - 20 kg
Colour	Black
Dimensions (WxDxH)	17.2 cm x 14.8 cm x 15.0 cm
Weight	3.2 kg

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Heavy Duty Ronford Baker 150mm Hi Hat.  Compact and built to last, these are perfect for any heavy duty low level filming.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Induro AT114 lightweight tripod supplied with Induro BHDO ball head (Arca Swiss compatible) supporting up to 8kg.

This is hands down the best 'travel' tripod i've found. When you take quality, speed of deployment, rigidity, weight, usability and 'pack down size' into account there's nothing to touch it in my opinion.You can extend and lock all legs in under 20 seconds and the centre column can be inverted without tools in less than ten seconds.

Superbly engineered with a myriad of features
Durable wide-stance cross-braced tripod with aluminum-alloy legs that offers solid camera support with plenty of flexibility--improved leg angle locks, a reversible locking center column (for low level shots), bubble level, spring-loaded weight hook, and oversized center column lock all contribute to stability, strength, and a higher load capacity. The spider (the structure that keeps the tops of the legs together) is magnesium alloy. Includes carrying bag and strap.

The BHD0 Ballhead is a dual-action magnesium alloy ballhead. Along with adjustable drag and tension control, panning control,  and large ergonomic locking knobs, it comes complete with a quick-release system that's compatible with Arca-Swiss components, for greater flexibility. 
Supplied with tripod case.

Tripod specs......

Load Capacity	13.2 lb (6 kg)
Head Attachment Fitting	1/4"-20 & 3/8"-16
Maximum Height	59.7" (151.6 cm)
Minimum Height	5.9" (15 cm)
Maximum Height w/o Column Extended	50.8" (129 cm)
Folded Length	19.3" (49 cm)
Weight	3.3 lb (1.5 kg)

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Manfrotto Q5 Magnesium Ball Head
High-performance head with a raft of features, including a 90°-105° portrait angle selector, a 15kg maximum load and the magnesium Q5 quick release system. The Q5 is compatible with Manfrotto standard plates and features three levelling bubbles. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Convergent Design Odyssey 7Q+ (inc. RAW package)

Great Hi-spec 7.7" Oled Monitor recorder c/w sunhood and Shape ODYSSEY 7Q CAGE & ROD BLOC SYSTEM for either 15mm rod mounting or 5/8 spigot mounting to a light or C stand.
The recorder has the RAW option enabled and comes with a Sun Hood.
Powering options inc either V-lock or Sony NPF.
Flight case inc.
2X 512 GB SSD (Convergent design Approved drives) inc

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

Lishuai C300R (same as fotodiox)

10" 30w Flapjack LED Light.
Very soft light output, great for interviews or portraits.
5500k Daylight Color Temperature Rating.
Mains power or Sony NPF.
Carry case, power supply, battery & charger inc.
Light stands are available in my other listings.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Linkstar 10" Bi-Color LED Lamp Dimmable.

Very soft Bi colour output, great for interviews or portraits. Mains power or Sony NPF. Carry case & power supply inc.

Light stands are available in my other listings.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Aputure Light Storm LS 1/2

High quality 60 Watt Aluminium LED Light with  CRI 98 rating.

Can be mains or  V-Lock battery powered.

(If you wish to power this light with Sony Type NPF batteries please see my separate listing for NPF to V Lock Power Adaptor)
 
Power supply, remote, paper filters and carry case inc.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Westcott Ice Lights (2 off) 

AC or DC power. Batteries are built in and can run for a approx 60 minutes at full power. Fast charge times of less than 2.5 hours - Soft, Even Daylight Colour: The LED array combined with the diffused front face offers an extremely soft and even wrap-around light source. 
Lamps are 5500k. The design allows for single-handed operation and requires no additional mounting accessories. Both ends of the Ice Light incorporate a 1/4-20" Thread with the option of mounting to a light stand.
Attach a gel (inc) to easily go from Daylight to Tungsten 1/4, 1/2 or Full CTO
The Ice Lights include the battery charger/power cords/ Cig plug charger along with individual carry cases and dual carry pack.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Datavision LED 900

900 ultra bright 5400k LEDs that draws just 54 watts.

The unit also comes complete with a V-Mount battery plate and 12v AC adapter. This allows the LED-900 to be mains powered or run on industry V-Mount batteries (available seperately) 

If you wish to power this light with Sony Type NPF batteries please see my separate listing for NPF to V mount power adaptor. 

Diffusion, CTO & Green shift correction panels are included as are Barn Doors power supply and carry case. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Gekko 600 LED Light

Super High quality, built like a a tank.

Will need a heavy duty light stand or c stand to support.

AC power or V-Mount.

Power supply and carry case inc.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

A Godox SL60 Daylight LED (also available as a 3 head kit supplied with barn doors, coloured gels  & 50 deg grid, please message for custom quote)

These lights are in my opinion the best LED Cobs currently available when you take Colour fidelity + light output + build quality + value for money into account.

This is a 240v  60w Cob LED light with Bowens mount, beauty dish and remote control.

Although it is stated as a 60watt output this lamp actually draws 83 watts very efficiently so the maximum light output is only marginally down on an Aputure lightstorm LS120. 

No additional ballasts, controllers or cables simply plug the extremely long 5m (very useful ) power cord into the lamp head and your good to go!

Heavy duty clamping mechanism is no problem for large soft box attachments.

If you wish to use this light on location with portable power please see my separate listing for 288W/H portable power inverter. This battery will run the light for over 2 hours at full output.



I can also supply this light with a 10-40 deg bowens fresnel with glass lens and red, green, blue, yellow filters. I charge an additional £2 per day for this item. 

Additionally I can also supply this light with a Westcott Pro 16x22 Bowens Softbox 
for an additional £2 per day.

Please message me for a custom quote for either of these 2 options.

Fantastic colour rendition. measured with a Sekonic C-800 spectrometer

96.3 CRI
98.0 TLCI

Outstanding Light output. measured with Sekonic L478D light meter.

2,000 lux @ 1m without beauty dish

4,500 lux @ 1m with beauty dish

9,600 lux @ 1m with fresnel attachment 40 deg (additional item)

20,000 lux @ 1m with fresnel attachment 10 deg (additional item)

NOTE: These are not brand quoted figures. These are the actual figures from this particular light, they are calculated by me metering the light from a distance of 1m from the plane of the COB in a darkened room.


Flicker Free guarantee! I have personally tested this Godox for flicker at
24, 25,50,100,250,500 & 1000 fps all @ 180 deg shutter angle with light at 25%, 50% & 100% brightness all with no flicker issues.

If you are also looking for additional  modifiers to use with this light please see my other listings for Bowens Mount Lantern or  Aputure Space Light & Fresnel 2X

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

LED ring light for creating stunning portraits without ugly shadows but with beautiful light reflections in the subjects eyes. 

Dimmable and powered by either AA or Sony NP~F batteries.
Magenta, Tungsten & Diffusion filters included.
Carry case included.

Camera in pictures is to illustrate mounting purposes only and is not included in the rental.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Ledgo LED Padlight. 

Very soft diffusion pad light, ideal for sitting in hot shoe mount of DSLR cameras. Ultra thin design.
Also has 1/4/20 thread at base.
Powered by Sony NPF batteries.

Camera and battery in pictures is for illustration purposes only and are not included in the rental.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

IDX X3 camera top LED light.

11 watt output, dimmable, 1/4-20 Eng screw fitting.

Barn doors + diffusion and CTO gel.

D tap power only.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Gekko Kicklite 106

British manufactured and built like a tank for heavy duty professional use. The Kick lite has 1/4-20 threading at each end and an in line dimmer.
Clear and frosted diffusion push in filters inc.
XLR power only.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Gekko K-Lite LED.
British engineered from a single block of aluminium for heat sink & heavy duty professional use. 
The K-Lite has a 1/4-20 thread for mounting purposes and is fully dimmable. 
Frosted and Tungsten correction gels included.
XLR Power only.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Gekko Kelvin Tile RGB  LED with paintbox controller.

A combination of red, green, blue, cyan, amber and white LED elements in a 16 x 15 matrix to generate high-quality full-spectrum white light and using the included Kelvin paintbox controller the light can generate any desired colour as well as various effects... Strobe, lightning etc.

2200k to 6500k 

DMX IN/OUT

Power 11–36 VDC
85 watts max (AC)
75 watts max (DC)

Can also be powered by V-lock batteries (not included) or XLR power (12 amp continuous)

Dimensions
301.0 mm x 301.0 mm x 99.0 mm (3.90 in x 11.85 in x 11.85 in)

Weight
4.08 kg (9 lbs.)

Supplied with Paintbox controller. AC power supply & cable, barn doors, diffuser and carry case.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

These are pretty much the same as Kino-Flo banks but at a much lower cost  4 x 55w 5400K Fluorescent Daylight tubes.
4 Leaf Aluminium reflective barndoors and Horizontal/Vertical Adjustable stand mount. Key Features: Dimmable via bank switching.
High Capacity Ballast Eliminates Flickering.



Light stand not inc.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

20/10/20 This particular light unit is currently not available due to a fault. I have a smaller version of this light available.

These are pretty much the same as Kino-Flo banks but at a much lower cost 6 x 55w 5400K Fluorescent Daylight tubes. 4 Leaf Aluminium reflective barndoors and Horizontal/Vertical Adjustable stand mount. Key Features: Dimmable via bank switching. High Capacity Ballast Eliminates Flickering.
Light stand not inc.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

Small HD 502 with Sidefinder and Monitor shade.
5" 1920 x 1080, HDMI & SDI Monitor and EVF
1366 x 768 Resolution as EVF
Takes Canon LPE6 batteries.

Use it as a monitor or use it as an EVF!

If you advise the camera setup you wish to use this item with I will include in the hire any powering solutions you may require inc P-Tap.
 I will also include with the item any of the camera mounting arms options I currently have listed from either Zacuto or Wooden camera. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

Zacuto Gratical HD Oled EVF

This is the HD version of the Gratical EVF with every option included.

0.61" OLED EVF
24-Bit RGB 1280 x 720 Resolution
Zebra, Vectorscope, Waveform, Histogram
Peaking, False Color, Test Pattern
LUT Creation and Import
Audio Meters
Four Programmable Buttons
Built-In -1 to +4 Diopter Adjustment
ARRI Rosette & 1/4"-20 Mounting

Takes Canon LPE6 batteries.

I have numerous camera mounting solutions and additional powering options for this item. I will supply whatever you need for powering and mounting the viewfinder included in with the rental price.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

The Sigma 18-35mm 1.8 DC HSM is the first wide-angle to standard zoom lens to achieve a large aperture of 1.8. Designed specifically for APS-C sized sensors.
All lens hires inc complimentary Zeiss lens wipes.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Canon EF 24-105mm F/4 IS Full frame L series professional Lens.

Image stabilised and USM AF

All lens hires inc complimentary Zeiss lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

A real speciality lens, great for portraits.
Canon EF compatible, manual aperture rings. 
incorporates a unique optical design with an apodization (APD) element next to the aperture. The APD element resembles the function of an ND filter which becomes thicker towards the perimeter, gradually reducing the amount of light transmission towards the periphery to produce a soft, natural and beautifully diffused Bokeh. 
Full-Frame Format F/2 (T3.2)  Dual Aperture Diaphragms: 8- and 14-Blades.
Trans Focus Lens offers two separate diaphragms. The stepless 14-bladed perfectly circular aperture, in conjunction with the apodization element gives this lens the ability to produce incredibly smooth bokeh.

All lens hires inc 3 Zeiss lens wipes.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

This Metabones Adapter allows attachment of any PL lens to MFT mount camera bodies, such as Panasonic, Blackmagic series. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

This Metabones Adapter allows attachment of any PL lens to Sony E mount camera bodies, such as the A or FS Series. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

The Metabones Canon EF to Sony E mount MK IV Smart Adapter allows use of Canon EF glass on Sony E-mount cameras, such as the A7 series or FS Series.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. .

Increase maximum aperture by 1.3 stop. (with a maximum output aperture of f/0.80)
Increase MTF.
Makes lens 0.64x wider.
When using with "passive" (without electronic control pin) MFT camcorders/cameras, such as BMCC 2.5K MFT and Digital Bolex D16 MFT, the Speed Booster must be powered by external power source via Micro-USB socket. Input Voltage is 5V DC.  
When using with "active" (with electronic control pin) MFT camcordrs/cameras, such as BMPCC + Pocket 4K, the Speed Booster can be powered by camera body. 
Build-in electonics to control lens aperture.

Compatible with the BlackMagic Pocket 4K's sensor stack.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Quality Canon EF to Micro 4/3 Adaptor.
Suitable for Panasonic and Blackmagic MFT cameras

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Converts Canon EF manual aperture lens to MFT
with variable ND control. Ideal for using Samyang or Rokinon manual Cine EF lenses on either Panasonic or Blackmagic MFT cameras. No more messing about with ND filters on the front of the lens.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Converts Canon EF manual aperture lens to E-Mount with variable ND control. 
Ideal for using Samyang or Rokinon manual Cine EF lenses on Sony A series or FS series cameras. No more messing about with ND filters on the front of the lens.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

An adaptor that allows you to use professional B4 (2/3 sensor) zoom or prime lenses on the original Blackmagic Pocket Camera /Micro cinema camera and pocket 4K using the S16 crop.

The B4 Magic Lens Adapter is an all brass adapter with built-in 1.4X optic to correct your B4 lens' image to align with the Blackmagic camera's sensor.  The B4 Magic Lens Adapter features a built in tripod foot with an integrated Arca-Swiss quick-release compatible base. Like other teleconverters, the optics built into the B4 Magic Lens Adapter will reduce the light hitting your sensor up to 1-stop.

The B4 Magic Lens Adapter is designed to work with lenses set to f5.6 and greater, (most B4 lenses are optimized for best focus at f5.6 and greater). Please be aware that shooting below f/5.6 may result in soft focus depending on your lens.

Camera & lens pictured are for illustration purposes only and not included in the hire.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Another EF mount speciality Lens. Tamron 35-80 Zoom Macro F/2.8 - 3.8 Custom LensDoctor conversion.
Manual clicked aperture.
All lens hires inc 3 of Zeiss lens wipes.

Tamron's SP 35-80 F/2.8-3.8 zoom lens is, without question, the best zoom lens ever manufactured within its class and price point. The sharpness and contrast of this lens is extraordinary compared to similar after market lenses and many OEM lenses. Only the similar Nikkor performs better, but not by very much. Macro performance across the central two thirds of the film plane stands up very well against dedicated macro lenses. You merely have to continuously turn the focus ring in order to focus from infinity to the minimum focus distance for macro work. While turning the focus ring, the zoom ring will automatically turn as necessary until the zoom ring is at the 80mm zoom setting.

Text below is from Lens Doctor site.....

This truly astonishing lens, one of my favourites comes fully refurbished including aperture assembly. The lens benefits from The Lens Doctor full customisation including custom paintwork and finish. It also is supplied with The Lens Doctor Tamron Adaptall/ EOS custom mounting machined from solid brass. A renowned lens with incredible sharpness and contrast, now fully restored back to its former glory and benefiting with a Customisation… giving a truly unique lens…Dare to be different

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Canon EF 17-40mm Full frame L series professional Lens.

All lens hires inc complimentary Zeiss lens wipes.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Canon EF 70-300mm DO Lens.
The DO stands for diffractive optics which means you can get a 70-300mm lens in a very compact form factor. Another lesser known fact is that the DO enables virtually no focus breathing so this lens is ideal for video work.

All lens hire inc complimentary Zeiss lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Zeiss 50mm prime lens with superb optical quality.
58mm front thread.

The lens itself is in A1 pristine condition but the metal lens hood has an ever so slight ding in it. Barely noticeable and it in no way affects the functionality of the lens but thought I should mention. 

All hires inc complimentary Zeiss lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Used for the direct optical conversion of 2/3" video B4 Lenses to 35mm PL mount cameras. This product was developed to maximise the use of the huge range of video zoom lenses (e.g. 100:1 zooms for 35 mm film cine. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Designed for Video DSLR use, the lens is equipped with a follow focus gear. However it also has easy switching between manual and auto focus by simply moving the focus clutch ring backwards or forwards.
F/4.0 aperture and super low dispersion glass for extremely low colour aberration. APS-C sensor coverage.
All lens rentals inc 3 off Zeiss lens wipes.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

The Samyang 7.5mm T3.8 Fisheye lens for MFT cameras giving a full 180-degree field of view. It is complete with gearing for attaching follow focus systems.

T3.8 aperture.

It is ideal for deep depth of focus filming and the minimum focusing distance is 0.09m 

All lens hires inc 3 off Zeiss lens wipes

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Sigma Art Lens for Micro Four Thirds 19mm  F/2.8


All lens rentals inc complimentary  Zeiss lens wipes


Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Very hard to find.

A 3 lens set of Zeiss/Arriflex S16 HS MK 1 Lenses 9.5mm, 12mm and 16mm.

All lenses are Arri Bayonet mount and 1  Arri bayonet to PL adaptor is included with the hire. This can be easily swapped over on each  lens change.

All lenses are T1.3 and have follow focus rings and 80mm front diameter.

Super 16 Lens coverage.

Can be used on the BMPCC 4K in S16 crop with a PL adaptor

Complimentary Zeiss lens wipes inc with every hire.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Heavy duty sack truck, great for moving flight cases and video gear.
Or indeed anything else!
Push button securely locks the truck into position in seconds. The foldaway handles are great for when carrying heavy loads and the large wheels ease movement across difficult ground. It is highly portable as it folds flat into the back of a car and it has a non-slip base unit.200kg capacity

203mm wheels
Non-slip toe plate 590x390mm (LxW)
Weight 9.5kg
Extended (LxWxH) 600x600x1280mm
Folded      (LxWxH): 590x80x1020

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 



MTF Effect Control Unit 2

Control of Canon or Zeiss EF electronic lenses on either Sony FZ mount cameras F3,F5,F55 or AJA Cion.

Please specify which camera when ordering.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

FF8MBT

MTF Effect Control Unit 3

Control of Canon or Zeiss EF electronic lenses on either Sony FZ mount cameras F3,F5,F55 or AJA Cion.

Please specify which camera when ordering.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

FF8MBT

Controller to mount Canon or Zeiss EF Lenses to E Mount Cameras. Allows you to smoothly control the focus and iris setting of your lens via the remote handgrip without relying on your camera's electronics. OLED windows on the adapter and the remote hand grip display lens information.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

FF8MBT

Controller to mount Canon or Zeiss EF Lenses to MFT Cameras. Allows you to smoothly control the focus and iris setting of your lens via the remote handgrip without relying on your camera's electronics. OLED windows on the adapter and the remote hand grip display lens information.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LN4T99 to see a list of other Lenses and adaptors I have available for hire. 

Atomos Ninja Blade.

10 bit 1080p ProRes/DNX recording from any camera with HDMI output or can be used simply as a monitor.
AC adaptor, Sun hood and 250GB SSD inc in hire.

Powered by Sony NPF batteries (not inc) but if required can be booked additionally

https://fatllama.com/rentals/leeds/hire-hawkwoods-dv-mc4-npf-charger--4-npf750-batteries-68073249

If you want to record from a camera with an SDI output please add the item below to your booking.

https://fatllama.com/rentals/leeds/hire-atomos-s2h--sdi-to-hdmi-converter-23206446

If you require 4K recording please my listing for Convergent Design Odyssey 7Q+

https://fatllama.com/rentals/leeds/hire-convergent-design-odyssey-7q-54065920


Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

AJA KI-PRO Mini Recorder

10 bit HDMI/SDI recorder.
Records to Compact Flash Card (2X16GB Inc)
Comes with V lock bracket for sitting in line between
camera and battery.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

Blackmagic Hyperdeck Shuttle.

10 bit HDMI/SDI SSD recorder

Supplied with Tilta mounting bracket / V-Lock power plate for 15mm Rods
and mini SDI connectors.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

Digital wireless control provides the ability to remotely control lens when used on  jibs, cranes, dollies, gimbals, steadicams and drones. Drive unit mounts on either 15mm or 19mm rods. This system is compatible with wide range of cameras and lenses Alexa, ARRI, RED, Sony, Canon, Nikon and Panasonic. 30-60 metre range
0.5, 0.6, 0.8 and 1.0 drive gear supplied.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Hocus Focus HF 1 follow focus

High quality follow focus unit with 0.5 and 0.8 wheels.
Sony NPF or tap power

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Tilta follow focus with adjustable hard stops for 15mm Rod mounting

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Built like a Tank!
Single arm 15mm rod mount
CNC machined billet aluminum and steel mount, transmission, gear case, and focus knob
Custom conical bearings
Magnetically indexed, dry-erase focus ring
360° unimpeded focusing
Reversible, tiltable mount

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

O'connor OFocus follow focus unit with sliding bridge plate and detachable handwheel which can be operated from either side of the lens.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

When LED lights just won't give enough output or absolute colour fidelity (CRI 99+) is a must then Tungsten lighting is still the way to go.

The Arri 600 kit kicks out a total of 1800 watts of tungsten light output from the 3 heads.  

3 off 600 Watt Heads  
3 off Light stands 90cm - 255cm extended.   
Safety mesh on each lamp head. 
Flood and spot adjustment. 
Drop in Scrim and Half scrim in both a 1/2 and full stop version.  


If you require a larger tungsten kit please see my other listing for Arri 800 lighting kit. Alternatively I have a comprehensive stock of LED lights. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire. 

DJI Ronin Gimbal 16lbs (7.25kg) payload.

Ideal for bigger cine cameras like Red, Alexa mini, Canon C series. Sony FS or Blackmagic Ursa.
If you use with a DSLR camera it makes balancing a breeze as it's not so critical to get spot on.

As pictured is exactly as I use it, I do not use the flight case as I prefer to cinch the gimbal to the tuning stand with velcro straps. This mean you are pretty much ready to shoot when you arrive on location and cuts out the build up time. Obviously it needs to be transported carefully or I can provide it packed in flight case if that's what you prefer.
There are numerous 1/4-20, Nato rail mounts and velcro straps attached to the unit for mounting monitors etc and securing cables.
It comes with two batteries which I find to be ample.
as I've never run out of power even on really long shoot days. 
The Ronin joystick and wireless thumbwheel controller is included in the hire. I can also share with you a nifty tip for giving your arms a break and putting the unit down on the floor safely when there's no stand available!

OPTIONS
I also have a Ring assembly and a bespoke shoulder mounted setup with V lock power options  (Photo 6 and 7)
If you are interested in either of these 2 options please message me for details.

If you are looking for a smaller gimbal set up please see my listing for the Ronin SC Similarly, if  you are looking for an even smaller setup I also have a listing for the DJI Osmo 4K (A combined gimbal and camera head)

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Steadicam Merlin arm and vest combo.
Offered at a really competitive weekly rate so you can hone your steadicam skills.

2.6KG Payload limit.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

DJI Osmo 4K Kit

Complete Osmo kit comes with 2 batteries, charger, phone mount, 9cm extension arm with plate & 2 hotshoe mounts, 2 x Clip on hotshoe mounts, telescopic handle, handlebar mount, plug in mic and Vari-ND screw in filter. There are also 2 additional  power cables with battery adaptor enabling the unit to be powered by either DJI Phantom 2 or Ronin batteries. 32Gb Lexar Micro SD included.

Supplied in custom flight case.

As well as being used as a conventional hand held gimbal this item can also be used as a mini remote 4k 'hot head' (see last pic) The only additional item required is a manfrotto super clamp & spigot (supplied for an additional £1 per day if required) and somewhere to clamp it!

 You can control the gimbal remotely by downloading the free DJI Go app, tether it to your phone or tablet and you can control the pan and tilt using the touch screen. The remote range is dictated by the wifi and is usually a fairly substantial distance with line of sight maintained.

 I was initially quite sceptical about how the touch screen would work but with a bit of practise I have been able to achieve remarkably smooth, precise and ultra slow pans/tilts and combo's in this way. Great for say.... establishing shots of buildings, slowly panning around landscapes or just following the action.

NOTE:  The batteries supplied will run the Osmo for around 3 hours and of course can be recharged during use but for longer running times I can also supply this item with 2 additional DJI Phantom 57 W/H batteries & charger that will power the Osmo continually for around 12 hours.
I charge an additional £3 per day for this option. Please message me for a custom quote.

If you are looking for a traditional gimbal to use with your own camera please see my listings for the either the DJI Ronin or DJI Ronin SC

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Clever little Micro Jib, ideal for GoPro's and smaller DSLR's. Simple idea that can give great looking shots. Low rates to encourage you to give it a go!

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Camera Motion Research Blackbird stabiliser.

A handheld stabiliser with easy balance adjustment.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

O'Connor Universal Base Plate.

As the name implies this base plate can be configured
to fit  any camera.
It provides a sturdy camera platform that is engineered to allow optical axis centering of the lens to the correct rod measurement

The Baseplate also allows for adjustment up and down of any standard set of 15mm rods attached to the LWS rod brackets for smaller camera builds.

The Universal Baseplate provides a channel in the top plate with a cutout plug to make insertion or removal of the 3-way camera screws quick and easy. The 3-way screws can be tightened by hand, with a tool through the drill holes, or by inserting a slotted screwdriver through a unique flip-up bottom plate access panel. Will supply with a set of any standard length 15mm rods you require.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80  to see a list of other Tripods, Gimbal & Grip items available.

The Axis Mini is the most adjustable ENG style mount for rosette mounted EVFs, giving you full 360º motion with four adjustment points. Designed to attach to the top of your camera set up
It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use with a variety of cameras.

The Axis Mini has three red tension levers that are controlled independently with 360 degree motion. Release all three levers to completely reposition the mount or release just one to make single segment adjustments. You can dial in the exact amount of tension needed at each lever to adjust on the fly. 

The Axis Mini attaches to your rig via a 15mm rod port at the top of a kit positioned perpendicular to your camera lens. The Axis Mini attaches to the Gratical HD EVF or Blackmagic EVF with wooden camera mod (please see separate listings) via a secure 1/4" 20 rosette mount. 

If you are looking for an alternative EVF/ Monitor mounting system please see my other listings for other Zacuto, Edelkrone and Wooden Camera options.

Similarly, if  your are looking for an EVF or Monitor to use with this mount please see my other listings for Zacuto, Blackmagic, Atomos and Small HD EVF's and monitors.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

The Zacuto Axis is a highly adjustable, universal EVF/Monitor mounting option designed to come from the top of your camera set up. The Axis attaches to your camera via a nato rail.
Just slide the Axis on the rail and lock into place with quick-release, ratcheting lever. The Axis has three main pivoting points that can spin 360 degrees and are controlled independently by red tension levers. Release all three levers to completely reposition the mount or release just one to make single segment adjustments. This allows you to dial in the exact amount of tension on each segment to allow adjustment on the fly without the need to manipulate a lever.  These three independent rotating pivot points give you unlimited positioning options.

Attach your EVF or monitor  with a ¼ 20 screw via the included quick release mount. This quick release  mount can slide on and off any of the four sides of the Axis mount rail. 

No matter the position of the Axis Mount, the four-way Z-Rail keeps your EVF/Monitor the right way up and in the perfect spot for you. 

It allows for cradling, under-slinging or standing of your EVF on the rail. The possibilities are endless and the adjustments are super-fast. The Axis can be installed or packed away in seconds.

If you are looking for an alternative EVF/ Monitor mounting system please see my listings for other Zacuto, Edelkrone and Wooden Camera options.

Similarly, if  your are looking for an EVF or Monitor to use with this mount please see my other listings for Zacuto, Blackmagic, Atomos and Small HD EVF's and monitors.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code MR2Y47 to see a list of other Monitors, Recorders & EVF's available.

This is probably my most used bit of grip kit along with the Bright Tangerine Titan Arm.
It is heavy duty and superbly engineered with multiple accessory mounting options. It is compatible with any nato rail  and adjusts to any position. It includes two cold shoe mounts (one vertical & one horizontal) that secure with a quick-release clamp onto the shoe of your accessory. 
At the opposite end of the handgrip, there’s a 15mm quick-release rod port. The  Handle includes one ⅜” 16 screw hole mount and two 1/4" 20 screw hole mounts. The top handle itself is hand-tooled from three-quarter maple. Probably Zacutos most useful bit of kit!

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

The Zacuto Half Cage is adjustable to work with all cameras, sizes and shapes. It creates great stability, especially when shooting with DSLR’s, giving your camera a sturdy side grip and the ability to add a top grip. The Half Cage is rod mounted so it works independently of your actual baseplate allowing you to adjust its position. It can be positioned and locked via an Allen onto 15mm lightweight rods. 

The side handle and most of the cheese plate holes are set to work on the right hand side of the camera but can be reversed if a left hand cage grip is desired for 2 handed operation. The Half Cage can mount just in front of your baseplate over the lens or behind your camera on rear rods depending on the balance point of your rig and where you want to add accessories. 
The top of the cage is universal nato rail for adding top handles or evf's. It also has a 15mm rod mount.
The handle side has two rows of ¼ 20 tapped screw holes to attach accessories. I will supply the cage with a pair of 15mm rods in any length you require.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Very useful set of Rig handles for 15mm rods. 
Push-button technology features two handles that can rotate individually on a 360° axis. The handles can be rotated by pushing the red buttons. Once the buttons are released, the handles are secured firmly in place.

You can achieve precise positioning by sliding the handles along the rods and tightening. Compatible with all 15mm rod systems. Stainless steel locking mechanism and CNC machined aircraft grade aluminum which is hard anodized.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Along with the Zacuto Universal top handle this is probably my favourite bit of kit.

Capable of supporting a staggering 8kg!
Constructed from hardened stainless steel and anodised components, with a design that counters over-torqueing, it gives you multiple clamping options with a maximum load capacity of 8kg. An ergonomic kip lever acts as a central locking system, allowing you to effortlessly change position. 3/8 at one end, 1/4 -20 at the other. Slate Grey model.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 


MR2Y47

Teradek Bolt Pro SDI Transmitter and 2 receivers are included in the rental along with 3 off 2 pin Lemo to ptap power cables and 2 X AC power adapters.

2 X SDI cables inc if required as well as 1/4 20 screw fixings for attaching to rigs.

Transmits 1080 up to 60p 4:2:2 - 300 ft Line of sight

Zero Latency

SDI Input & Loop-Output / 2 Outputs



If you wish to transmit zero latency HDMI signals please see my listing for Amimon Connex mini HDMI TX/RX

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Super compact and zero latency HDMI TX/RX supplied with either P tap power cables 
or 2.5mm power cables and ultra thin HDMI Cables. 500m range!!!

So small it's ideal for drone work as well as camera.

In fact the transmitter is so small and light it can be attached to a camera or rig using velcro and the receiver has a  female 1/4-20 thread on the underside for mounting.

I believe Teradek use  Amimon chipsets in all of their transmitters and receivers.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Transmitter unit that ordinarily sits inline between Camera V mount plate and the battery.
if you wish to use standalone it requires power from either V-lock battery or 4 pin XLR.
Picture of Camera & Directors monitor is to illustrate unit fitting and is not included in the hire.
Please note it is compatible with the following formats....
HD-1080i/59.94, 1080i/50, 1080p/23.98PsF, 1080p/29.97, 1080p/23.98 720p/59.94, 720p/50 SD-525i/59.94, 625i/50

Will supply SDI cables with 
the rental if required.


Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Bright Tangerine Misfit Matte Box Lightweight 2 Stage 4x5.65, Carbon Fibre Core, 
Designed to be ultra compact and lightweight, yet has the field of view to cover wide lenses. 
Beautifully engineered and extremely practical matte box. Many different configs inc DSLR lenses. Can supply in clamp on or rod mount configuration so If you let me know what lenses and/0r camera rig you are using and i'll make sure you get all the right parts from the following.....

15mm rod clamp swing away arm
15mm rod clamp
143mm - 114mm Bellows
143mm and 114mm back plate (clamp) 
114mm - 80mm step down (clamp)
80mm -77mm screw in 
143mm black hole
114mm black hole
114mm to 77mm screw in wide angle adaptor
Set of Mattes 
Top flag
4x4 filter tray

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.


Ultra Lightweight 2 Stage matte box was specifically conceived for Gimbal and Steadicam use.
The frame itself weighs 98 grams and adding the shade brings it up to about 195 grams. The frame can hold up to 2 off 4x5.65 or 4×4 filters or a combination of both.
It is designed to fit 114mm lenses, and can work with smaller lenses using the adapters.
Despite being super compact, it features incredible field of view covering up to a 14mm Cooke or RED Pro Zooms at 5K. Many different configs inc DSLR lenses.

Comes with with Top flag, and 114mm clamp on fitting.
Can also supply the following if required.
15mm rod mount
114mm Black Hole
114mm - 80mm step down ring
114mm to 77mm screw in wide adaptor
80mm to 77mm screw on adaptor

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Built like a tank the O'Connor O Box comes as standard with Top flag, side flags and 114mm bellows for 15mm rod fitting or 114mm Clamp on.

Will also include Bright Tangerine Black hole, 80mm step down ring and 80mm-77mm adaptor for DSLR lenses if required.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

Genus Mini matte box 105mm clamp on
comes with 1 stage, 4x4 360 rotatable filter tray.

It is built as a clip on system only and comes with a screw in 82mm adaptor for DSLR Lenses. I will also provide 82-77mm step down ring so that it covers the most common lens sizes. If you require a step down adaptor other than this please let me know.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

VOCAS MB250 105mm clamp on

If you're looking for the best value dual stage matte box for DSLR Lenses with a 77mm thread then this is the one.
The matte box is lightweight, comes equipped with a top flag and has really clever internal 'eyebrows' which work like mini flags on the inside of the shade for even more light control.
It has one fixed and one rotating filter stage
which takes 4x4 filter sizes and can be rotated through 360 degrees.
I supply this with 105- 80mm clamp on and  a Cordvision 77-80mmOD ring adaptor that you simply screw to the front of your lens and then clamp in.
It takes seconds to swap out with different lenses.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

A Baseplate, Matte box and Storage with manfrotto compatibility included.
This was originally imported from Canadian company Cinevate and cost a small fortune at the time.

It was used with the original 5D MK 2 although you can of course use it with any DSLR or Video camera

15mm Carbon fibre rods no less on the Core main unit and i've added a couple more rods for attaching things.
The Titan swing away matte box is height adjustable and has a 1/4-20 and cold shoe mounts. The Matte box also comes with a multitude of donuts. I've put a Manfrotto 577 receiving plate on the baseplate and a Manfrotto 501 plate on the underside and is supplied with a Panavision DB bag for storage. 

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code TR9X80 to see a list of other Tripods, Gimbals and Grip Gear available. 

Lipa HD 4 x 4 ND set 0.3, 0.6, 0.9, 1.2 plus 4x4 Circular polariser.
These are optical glass filters.
Supplied in an Arri protective filter pouch

Dimensions: 100mm x 100mm x 2mm
Weight: 70g ea

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code FF8MBT to see a list of other Follow Focus, Matte Box & Transmitters available.

LN4T99

Set of Nisi filters for the DJI Mavic Pro


LN4T99

Sony 128GB SxS Pro+ D series
128GB Storage Capacity
2nd Gen PCIe Interface
Max. Read Speed: 3.5 Gbps
Max. Write Speed: 2.8 Gbps
Min. Write Speed: 1.3 Gbps
PCI ExpressCard 34
Optimized for HFR 4K Content
Data Refreshing, Data Error Correct
Clip Recreation in Case of Power Loss
Wear-Leveling Data Defect Minimization

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Sony 64 GB SxS Pro+ Card D Series

64GB Storage Capacity
2nd Gen PCIe Interface
Max. Read Speed: 3.5 Gbps
Max. Write Speed: 2.8 Gbps
Min. Write Speed: 1.3 Gbps
PCI ExpressCard 34
Optimized for HFR 4K Content
Data Refreshing, Data Error Correct
Clip Recreation in Case of Power Loss
Wear-Leveling Data Defect Minimization

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Sony SxS Pro 32GB Card

Interface: ExpressCard 3/4, PCI Express interface

Transfer Speed:: 800Mbps (=100 MB/s)

Input Voltage: DC 3.3V within 10%, DC 1.5V within 10%

Operating Temperature: -25 to 65 degree C

Operating Relative Humidity: to 95% (non-condensing)

Storage Temperature: -40 to 85 degree C

Storage Relative Humidity: to 95% (non-condensing)

Weight: Approx 27g

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Panavision Bucket Bag
Internal dimensions  Length 310, width 310, depth 280. Pull cord cover for main compartment , 17 x small individual external pockets, Waterproof base with feet and Heavy duty carry strap.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code PW2P34 to see a list of other Power, Media, Bags & Misc items available.

Fantastic hire experience. Great product and after support Paul who has vast practical knowledge in the field. Highly recommend. 

amazing price, great communication and great expertise. would highly recommend Paul.

Arri 300 Plus Fresnel   
Smooth focusing and a bright, even beam. 
The beam angle in the flood position is 53° and a narrow 14° in the spot position.   

Extremely hight CRI 300 watt tungsten light.  
Color Temperature	3200K 
Lens Diameter	3.2" / 110 mm  
Mounting 5/8" Receiver   
Bulb Type 1 x CP81 FSL 300 W GY9.5
Dimensions	10 x 7.4 x 6.35" 
Weight	4.0 lb / 2.0 kg  

Supplied with barn doors and 13a standard Plug  Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.


Arri 650 Plus Fresnel 

Smooth focusing and a bright, even beam. The beam angle in the flood position is 52° and a narrow 14.5° in the spot position. 

Extremely hight CRI 650w tungsten light.

Color Temperature	3200K

Lens Diameter	4.3" / 110 mm

Cable Length	25' / 7.6 m

Mounting    5/8" Receiver 

Bulb Type     1 x GY9.5

Dimensions	9 x 12 x 7.5" / 22.9 x 30.5 x 19 cm

Weight	7.2 lb / 3.3 kg

Supplied with barn doors and 13a standard Plug

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

When LED lights just won't give enough output or absolute colour fidelity (CRI 99+) is a must then Tungsten lighting is still the way to go.

The Arri 800 "Redhead" kit gives a total of
2400 watts of light output from the 3 tungsten heads.

3 off 800 Watt Heads

3 off Light stands 90cm - 255cm extended. 

Safety mesh on each lamp head.

Drop in Scrim and Half scrim in both a 1/2 and full stop version.

If you require a smaller tungsten kit please see my other listing for Arri 600 lighting kit.
Alternatively I have a comprehensive stock of LED lights.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

Versatile 2 Head 5600K LED Lighting kit 

2 X Sokani X60 LED lighting heads with Bowens reflectors, remotes and AC power supplies.

The light heads take a 12v (2.5mm) input so can also be powered by portable battery options if required.

2 X Calumet compact lighting stands

2 X White diffusion umbrellas

1 X Bowens Fresnel spot attachment

This kit facilitates a super lightweight, compact and versatile lighting option for many different applications that can be quickly set up with the included stands, fresnel and diffusion attachments.

The Sokani X60 also has 5 FX modes... flashing, bad bulb, lightning, firework, and TV.  Although it is stated as a 60watt output this lamp draws 84 watts so the maximum light output is only marginally down on an Aputure lightstorm LS120.   This is the V2 model which is super quiet and has an improved Heavy duty arri rosette clamping mechanism so no problem holding larger soft box attachments.  Super efficient Bowens reflector.  

Technical info (Measured by me with a Sekonic C800 Spectrometer)  CRI: 96.7  TLCI: 97.2 

If you are also looking for additional modifiers to use with this light please see my other listings for Bowens mount modifiers.  

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.



Arri 150 watt Fresnel Spotlight

An incredibly versatile small fresnel spotlight.

Lamp Type:	150 W 230V GX6,35
Supply Voltage:	230 V
Correlated colour temperature:	3200 K
Lens Diameter:	50 mm
Barn door size:	79 mm
Filter insertion size:	79 mm
Mounting:	Spigot 16mm
Size:	285 mm - 170 mm - 150 mm

Supplied with in-line dimmer, barn doors and 13amp plug fitted.

I have three of these available if required, two have an in-line dimmer fitted

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

I think the vast majority of shoots using higher output COB Led lights usually will have some access to mains power so IMO the Godox SL series still offer the best value for the money.

Same high quality CRI light output watt for watt as other versions, simple and intuitive to operate but no additional ballasts/controllers or connection cables to contend with. 

Simply plug in, switch on and go.

Compatible with all bowens mount lighting modifiers.
(Please see my other listings)

If you should wish to power this light on location please see
my listing for portable power station/inverter.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.


This is an NPF power supply with handle and lightstand mount suitable for any LED heads with a 2.5mm 12v power input and standard 5/8'' female spigot. Ideal for use with my Sokani X60 LED heads.

Please note: this listing is for the power adaptor only (Photo 3)
NPF batteries and LED Light are for illustration purposes only.

If you require NPF batteries please see listing below

https://fatllama.com/rentals/leeds/hire-hawkwoods-dv-mc4-npf-charger--4-npf750-batteries-68073249


Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

Rift Labs Kick light.

Originally a Kickstarter project and one of my favourite lights for smaller objects, pack shots etc.

Fantastic little LED light that is incredibly difficult to get hold of these days.  
In built battery, USB charging and power.
1/4-20 thread and IOS/Android app for control and lighting effects.

The thing that sets this light apart though is the included diffusion panel. It's hard to sum up in words ......it's a kind of dense frosted panel that just gives off an incredibly vivid yet diffuse light source that is perfect for lighting smaller objects, product shots etc. 

2500 to 10,000K + Full RGB via the app.

5.3oz (without diffusion panel)

Note: I'm afraid one of the little plastic lugs that was used to attach the the diffuser panel to the light snapped off so I have fashioned a retaining system from velcro strips. Doesn't detract at all from the functionality of the light, does the job well and looks very neat also. The day rate has  been discounted to reflect this.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

GVM 150S Bi-Colour + RGB LED light with Bowens mount and Fresnel type flood/spot adjustment. This light incorporates a four block array each consuming approx 36 watts. It uses 2 blocks in either Bi-colour or RGB mode for a total output of 72 watts in either mode.

Please see below for Lux output in Bi-Colour mode.

RGB LED light 240V

2000-5600K + Full RGB

This is a 240v LED Light with both bi-colour and full colour RGB output. 


If you wish to use this light on location with portable power please see my separate listing
for 288W/H portable power inverter. This battery will run the light for over 4 hours.

https://fatllama.com/rentals/leeds/hire-288wh78000mah-portable-power-invertor-52132667

Light outputs below taken by me. Measured at 1 meter

Flood: 2200lux at 5600K :  2700lux at 3200K

Spot : 4200lux at 5600K  :  4800lux at 3200K

If you are looking for a different type of light please see my other listings for Arri, Godox, Gekko, F&V or Aputure lights.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

Arguably Aputure's most flexible light modifier!

Suitable for any Bowens light lamp head.

Similar in principle to a Jem ball or China Ball the 18.1" dia cylindrical shaped Space light can be clipped up to any length or extended to its maximum 28.5" drop.

360 deg super soft light output which can also be controlled with the addition of the included clip on black skirt. 

Ideal for use with my Godox SL60 Bowens mount LED head
 or GVM 150S Bowens Mount LED if you require Full RGB lighting. 
(Please see separate listings)

If you are looking for alternative light modifiers please see my other listings for Bowens mount lantern, Westcott Pro soft box, Godox soft box or 10-40 deg bowens fresnel with glass optics.

Please enter the code AL7X53 into the Fat llama search box to see all of my items available for hire or enter code LG9Y66 to see a list of other lighting gear I have available for hire.

Made for shooting in the field without access to AC power, the SLB60W LED Video Light from Godox is a battery-powered LED fixture with a 9.7 x 4.7 x 5" monolight form factor. The SLB60W has a color temperature of 5600K, making it ideal for seamless blending with other daylight-balanced fixtures, shooting outdoors or in venues with large windows. CRI/TLCI ratings are 93 and 95, indicating an accurate rendition of color.

I use this light in combination with the Blackmagic Ursa min cinema camera to help properly light my sets. Very flexible, easy, does what it says on the tin sort of vibe. 

Features:
Dimmable 18" LED SMD Ring Light with a wide dimming range from 1%-100%.
Special LED SMD design, lightweight and portable. Constant current drive, low power loss.
NO ultraviolet and infrared light radiation, low heat output, safety and environmental protection.

Total Power: 55W
Color Temperature: 5500K
Total illumination: 4800LM
CRI (Color Rendering Index): >83

Max Heigh: 185cm
Min Heigh: 100cm

Package Including:
1* LED SMD Ring Light
1* Orange Plastic Filter
1* White Plastic Filter
1* Bag
1* AC Power Adapter
1* Plug
2* Battery
1* Portable Power Supply
1* Light Stand


We're renting out our first Godox VL300 COB LED lighting kit!

This is an insanely bright light offering power similar to the Apture 300D Mk2. This light can be powered by AC or by 2 x Vlock Batteries, and controlled via a remote control app on your phone.

We include a light stand, carry case, Bowens fit dish, gels & all the cables you need to power the light.

We can also include a 150cm Octo Softbox upon request!

Model: LT-RGB2

Color Temperature: 2800K-9900K ( RGB-Color Stepless adjustable)

Power: 20W (70LEDs)
Voltage: AC 110-220V / DC 15V
Lumen: 2000LM
Color Rendering Index: 95RA
Light Angle: 120 degree
 
Feature:
 
Special Scene Supplementary Lighting Mode
You can simulate 10 various special supplementary lighting modes such as lightning,sunrise, flashing lights of police vehicles,to better meet the user’s demand.


Dual mode
Made up of colorful RGB full color mode and natural fill-in light 3200k,9900k color temperature mode,dual modes independent operation ,easy to switch to your required mode with one button. 


Various Colors 
Provides RGB full color,you could choose the color as needed through the APP,or can adjust manually to create your unique color. 


Wide Irritation Angle
The lamp panel length is up to 40cm,greatly widening the light angle, which is very suitable for stereo and wide angle light supplement.

High CRI
Adopts 360 well-selected high-quality lamp beads with big luminous chip, color rendering index is greater than or equal to 95, it can perfectly restore the true color of the object.


The Chameleon LED RGB Tube Light from DigitalFoto Solution, Ltd. is a versatile, 4' LED tube light that offers fully adjustable brightness, a seamless colour temperature range from warm tungsten to crisp, cool daylight, and an available gamut of RGB colours. It includes 12 adjustable colour effects modes, which offer customizable brightness, colour, and speed settings.

Output and functions may be set locally by using the integrated controls and LCD panel, or wirelessly by downloading the free iOS or Android app and Bluetooth pairing with a portable device. The Chameleon also features DMX in/out connectivity via Micro-USB ports for connecting multiple light units in a network.

With the included multi-voltage AC adapter, the Chameleon can be used anywhere in the world, and with the integrated lithium-ion battery, the door to any location is open.                              CRI +95

LED lighting is the most efficient & time effective way to light a set, interview or shoot. No hot lamps, no heavy set ups and extremely portable. All power able from normal house sockets.

GODOX SL60W (Cheaper Apurture 120d)
x2 Came TV Boltzen 55w
x2 Lighting Stand
Neewer C Stand
Godox Softbox with double diffusion

NOTE for transportation* The minimum length of the centre part of the  C-stand is 1.6 meters.

 Aputure MC RGB Rechargable Light includes carry case, USB C charging cable and diffuser. I have a second one available, if you interested in both please do message me. 

Use this link to get £20 OFF your first rental: www.fatllama.com/r/drai-199ef

Features:
• Color temperature adjustable from 2800K - 10000K 
• Supports HSI & RGB separate control 
• Preset Rosco and LEE filters 
• 8 Preset effects modes
• Control via Bluetooth 5.0 with your Smartphone (up to 25m distance), Control Unit or 16 bit DMX-512

Includes:
1x RX-818 Flexible LED Light
1x Control Unit
1x Softbox
1x Diffuser
1x Light Grid
1x Light Stand (upon request)
1x Hard Case
1x Power Cable & Data Cable

Daily price is 24 hours from collection. I can deliver and collect at £1 per mile.

For an even better lighting experience check out my other FalconEyes lighting gear, a great addition to the RX-818.

More information: www.falconeyeshk.com/product-page/rx-818-k1

For your benefit and mine, I check all equipment prior to handover, and again on its return - I pride myself on keeping it in exceptional condition. Thanks


SAMTIAN LED Video Lighting Kit with Stand LED camera lighting 240pcs 3200/5600K Beads Including Battery Charger Mini Ball Head and Carry Case for YouTube Studio Photography Lighting, Video Shooting Specification:

Color Temperature: 3200/5600K

CRI: 93+

Power Supply: AC-DC 12V 2A or NP-F series battery

Power: ≤24W

One full charged battery runtime is about 30 minutes.

Lumens: 1200LM

Beam Angle: 60°

LED Qty: 240pcs

2 Neweer NL430 LED lights with Bi-Colour, great for photoshoot and video.

These lights are also great for fill, they are small but powerful with a controllable wheel for the brightness and colour temperature.

What's included: 
-2 Neweer Bi-Colour Lights
-1 Light Diffusion
-2 Pop Up Soft Boxes (One shown in photo)
-2 Light Stands 
-2 Main AC Cable (One shown in photo)
-Plug Extension 

I have used them on may shoot, little wear and tear but work in perfect condition.

Any further questions please feel free to fire them over by dropping me a message.

Godox VL-150 is an amazing light with great power with it's linear brightness. 

Great to use as a key light or fake daylight. Daylight balanced at 5600k.

What's Included:
-Godox VL-150 Light
-AC Power Cable 
-Light Gels
-Wireless Remote Control 
-Light Dome

In great condition and comes with padded bag, please double check when used that everything is in the bag (photos are a great way for visual checklist).

Arri 2000 Plus 2Kw light (Blonde) 2 available

Description

Location

Item lent by Paul

Other items from Paul

Paul's reviews

FAQs

Arri 2000 Plus 2Kw light (Blonde) 2 available

Explore other options around Leeds