Perfect for ensuring your house is properly insulated and shielded from the cold during winter. This is incredibly easy to use. It's also a very useful device to use when house-hunting.

1) Allows you to make your home more comfortable and energy efficient
2) Helps identify issues with the insulation of your home
3) Light indicator shines blue to indicate cold draughts and red to indicate warm draughts
4) Set the sensitivity and measurement scale °C/°F
5) Identify both hot & cold draughts around your home

Alan Gordon Director's Viewfinder Mark Vb. This accurately defines choice of lenses, angles and coverage in a wide variety of formats for both film and video. Crucial to have on set and for recces.

Schneider Classic Softs 4"x4" Full Set (1/8, 1/4, 1/2, 1 & 2).

Hundreds of Micro-Lenslets arrayed within each Schneider Classic Soft filter provide a precisely controlled soft image that is overlaid on a sharp, in-focus image. This combination diffuses the image while maintaining overall sharp focus. Schneider calls this Schneider In-focus Diffusion. The number of Micro-Lenslets per square inch determines the image blending effectiveness of each Classic Soft filter.

The Schneider 4x4" Classic Soft Filters produce a classic Old-Hollywood close-up look, with image quality for current Hollywood needs. Would you like to achieve the same tonality as an old image of Cary Grant or Marlene Dietrich? 

Tiffen 4x5.65 Polarizer Filter (Panavision Size). Including pouch.

Tiffen Polarizer Filter. Polarizers provide colour and contrast enhancement. Reflected light often shows up as whitish glare that washes out colour in an image. A Polarizer corrects this problem producing deep, dramatically blue skies. It also removes glare from non-metallic surfaces, such as windows and water. Colour saturation in general, especially outdoors, can be improved significantly.

Tiffen ND 0.6 Soft Edge Grad Filter. 4 x 4 Size. Includes pouch.

Often, you want to balance light intensity between two areas within a scene. This is important outdoors to allow more sky detail while properly exposing the foreground. Exposing for the foreground will produce a washed-out, over-exposed sky, exposing for the sky will leave the foreground dark, underexposed.

Cinekinetic Cinesaddle Large Saddle Bag. Suitable for Large Camera Rigs.

As a basic camera mount the Cinesaddle is far more versatile than the tripod. It is lighter, smaller, offers greater stability and it will never pinch your fingers.
No fluid head is needed; the Cinesaddle grips the camera tightly, keeping it rock steady while you make any shot. Panning and tilting is as easy as with a fluid head, only the technique is different. The Cinesaddle's small size lets you mount your camera in the most confined space. Only one cubic foot in size, the Cinesaddle's total weight is one and a half pounds. That's less than half the weight of a standard zoom lens!

For an eye level shot, mount your camera onto any stable object such as a piece of furniture, a prop or your camera case. This wondrous product encourages each individual camera operator to use their creative abilities to the utmost and get more...

Tiffen Black Pro Mist Filters 1/8 & 1/4. 4x4" Size.

Reduces Highlights and Lowers Contrast
Softens Wrinkles and Blemishes
Creates a Soft Quality of Light
ColorCore Technology

The Tiffen 4 x 4" Black Pro-Mist Filters help to reduce the value of the highlights while slightly lowering the overall contrast. This filter is especially useful for smoothing out and softening facial wrinkles and other blemishes. While designed for use with movies, this filter can also be used for fashion and beauty applications. Unlike a traditional diffusion or soft focus filter, Pro-Mist filters provide little loss of detail across the image. The 1/8 density provides a very small amount of contrast and highlight reduction and allows for a soft, pastel-like quality of light.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. These filters each measure 4 x 4" / 101.6 x 101.6mm.

Tilta MB-T12 (MBT12) 4 x 5.65 Carbon Fibre Matte Box (Clamp-On). Tilta MB-T12 4 x 5.65 Matte box made of carbon fibre. This is a 3-stage mattebox. Includes full set of Mattes and Top Chop. Also included: 80mm, 95mm, 114mm & 134mm adaptor rings.

This is also compatible for use with 15mm bars.

Provided complete in a wheeled 1510 Pelicase.

Tilta kit is solid as a rock. It's comparable to Arri's accessories in design, build quality and durability in my opinion.




This easy-to-use kit is designed to prepare you for the unexpected when on set. Featuring a 8x8' Scrim Jim Cine modular anodized aluminum frame, positive-locking connectors provide extra support on a windy afternoon or a long day of shooting. Featuring eight 46" frame tubes, this frame breaks down quickly and easily for travel and storage. A 8x8' 3/4-stop diffuser softens available or studio lighting without changing any color temperatures, while the 8x8' single net fabric reduces light by half. Designed to mount immediately to your Scrim Jim Cine Frame via hook-and-loop fastener edging, this single net fabric is incredibly easy and fast to setup. It will then cut down light by approximately 1 stop for added control over the scene and your exposure. Additionally, it is designed to be durable and withstand normal environmental conditions with ease.

This portable system breaks down easily, proving to be ideal for photographers and filmmakers who travel often.

Included: 
1 x 8ft by 8ft (96"x96") Frame
1 x 8ft by 8ft (96"x96") 3/4 Diffusion 
1 x 1 x 8ft by 8ft (96"x96") Single Net
2 x C-Stand Knuckles & Frame Holders
1 x Scrim Jim Carry Bag (3ft4 or 1 metre in length)

Tilta Quick-Release Universal Handgrip for 15mm and 19mm Systems. Three-joints design allows adjustments of all angles.
Arri Compatible steel rosettes bring excellent stability to the handgrips
Snap-on rod bridge accommodates both
15mm and 19mm rod systems
Both handles can be extended to fit your needs, extremely stable.

The Dinkum Systems Cine lens shade helps keep your lens free of sun, dust and drizzle.  Featuring a large 10”x 6½” beveled-edge anti-reflective aluminum shade supported by a super-strong spring clamp and a 15-link, 16" long, multi-directional, length-adjustable arm. 

The Schneider 4 x 5.65" 1/8 Coral Solid Color Filter adds a warm, pale orange coloration across the entire image and helps to subdue overly bluish casts. The solid color design makes this filter well-suited to pairing with other filters for further control over the appearance of imagery. 

Coral-colored filter provides subtle, additional warmth to your images and reduces bluish casts.
Solid color filters apply the amount of density evenly across the image plane in order to achieve a fluid and creative effect.

It measures 4 x 5.65" / 101.6 x 143.5mm.

Provided with Schneider filter pouch.




Tilta III FF-T03 Follow Focus. 

Like the Arri MFF-2, the Tilta III FF-T03 is a great lightweight and accurate (this has minimal play) follow focus solution for 15mm bars/rods. this also has friction adjustment/dampening levels and a hard stop function.

Provided with standard cine-pitch gear (0.8) and also two other gears (0.6 and 0.5).

Also included;  gear rings, a toffee hammer/crank handle and 12 inch focus whip.

Provided in a Peli 1150 Case (which is small enough to fit in a backpack)

Tilta kit is solid as a rock. It's comparable to Arri's accessories in design, build quality and durability in my opinion. This is a beautiful piece of kit.

2 x Manfrotto Autopoles (2.1m - 3.7m). Black Aluminium.

15kg payload limit
Safe, secure and easy to use
Rubber cups at each end for extra grip
Compact, perfect for smaller spaces
Aluminium autopole for complete durability
Can extend to a mighty 370cms

These are easy to transport, being light and 2.1m when compact (they fit in my Mini!).

This arm spans 22 cm and can support up to 2,2 Kg. The 819-1 is the ideal companion for attaching a video monitor to a camera or using as a fl ag support. Like the 814-1, the pivoting pins are 1/4'' and 3/8'' threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.

It's a country-mile ahead of a Noga arm (which fatigue/fail over time..not good on set) as it's hydraulic!

Supplied with 2 x Manfrotto Nanoclamps for easy attachment to 15mm bars etc.

Here’s a link to a video which explains in just over 1 min what the ladder can do: https://youtu.be/6QTnDFKgnJA?t=7

This packs down to just over 1m87cm or 6ft1” in height, which means it can be transported in a car (it fits in my Mini!). 

I’m happy to deliver/collect this in the SE London area for an additional charge.

The Little Giant Revolution XE can be used as a height adjustable stepladder/A-Frame, used on stairs (either side is adjustable) or used as an extendable ladder for work at greater heights (it can be extended to 6.45m! that’s over 21 feet!!!).

It’s very comfortable to use as it’s flared at either end, making it very stable.

Provided with a the following accessories:

Little Giant Work Platform https://www.youtube.com/watch?v=sDSJWmZbhfc
 – Great for Paint Cans, Tools or Feet! Makes life much easier when working on the ladder for a long period of time (i.e. when painting/decorating or cleaning windows)

Little Giant Stand Off https://www.youtube.com/watch?v=NQxqoIo3G7Q (see photo) – While making the ladder more stable when using it in it’s extension mode, this also enables work such as cleaning guttering to be undertaken much more easily and to reduce the risk of damage to plastic guttering/windows etc.

Prosup Tango Roller Slider

2m or 6'6" length
15kg Payload (suitable for most larger Arri, RED & Sony Rigs)

The Tango Pelicase Kit includes:
2 x 1m track length, which is provided with a central tripod adapter
1 x Manfrotto 100mm-75mm Bowl Adaptor
1 x Dolly 
2 x Magnetic end stops 
3 x Avenger Roller Low Boy Stands (with wheels, different to that pictured)
1 x Pelicase

Note: The kit is not supplied with a tripod head but this could be negotiated as an extra.

The weight of the Pelicase is around 20kg.

The Avenger Low Boy Stands weigh around 8kg each. These stands are wheeled and each wheel has a brake. 

Note, you'd need to supply your own tripod head (100mm or 75mm bowl fitting). Also, if using a 75mm bowl fitting tripod head with a particularly long/protruding thread/tightening mechanism (as is the case with some lighter-weight Manfrotto models, 503, 504 etc) then it needs to be shorter than 8cm in order to clear the joining section in the track.

Avenger D650 Junior Boom Arm (with counterweight) extends up to 3m and will support a 10kg payload.

Manfrotto Avenger A5036CS Roller Stand (with braking wheels). Low base for extra stability. Payload: 40kg. Wheels are removable.

Items provided in a soft case.

Please note the total weight of these items is around 28kg.

Powered by a reliable and easy-starting Briggs & Stratton 300 Series OHV 125cc engine. Features a steel cutter deck and will either collect or rear-discharge grass. Robust and hardwearing powder-coated steel cutter deck. Self-propelled, no need to push, ideal for maintaining a lawn with minimum effort. Additional mulching plug means no need to collect the grass as it recycles the clippings into the lawn.

- Mountfield SP185 Self-Propelled Lawnmower
- 45cm cutting width
- Briggs & Stratton 300 engine (125cc) 
- 5 cutting height positions (20-70mm)
- 55 litre collector
- Steel Deck 
- Provided with mulching plug

I can provide this with two fuel options: 
1) A small amount of fuel (Unleaded petrol) and an empty 10 Litre Jerry Can (with Spout). This option should be fine for most small/medium gardens. You're unlikely to need to refuel.
2) A full tank of fuel (Unleaded petrol) and an empty 10 Litre Jerry Can (with Spout) for a small extra fee of £2. This option is better if you're planning to use the mower more extensively and want to avoid the hassle of a trip to the petrol station to refuel.

I'm also happy to Deliver/Collect within a 5 mile radius of Forest Hill SE23 for a small extra fee of £3. 

The steel-constructed Matthews Low Boy Double Riser Combo Stand, in a silver finish, rises to a maximum height of 6.4' (1.93m) and can support gear weighing up to 72 lb (35kg). The stand has a wide 31" (78cm) footprint for maximum stability and a Rocky Mountain/Lazy leg that extends independently of the others to center the load on uneven surfaces. 

The Low Boy Double Riser has a 1 1/8" Junior receiver and a retractable 5/8" pin. 

It will accept optional #366068 Combo Adapter Wheels.

2 x Manfrotto A5012 (A5-012) Avenger Low Boy  Roller Stands (with folding bases). 

Maximum Height - 120 cm
Minimum Height - 78 cm
Material - Steel Base + Chrome Steel Sections
Safety Payload - 25 kg
Closed Length - 68 cm
Weight - 8.000 kg
Closed height - 68 cm
Collapsible steel feet

Legs and column in steel, risers in aluminium, complete with wheels. 3 sections, 2 risers. Ø: 45, 40, 35mm. Leg: 20x40mm.

Very useful on set for monitors/light fixtures which need to be moved around swiftly with little effort. I use these with a Prosup Tango Roller Slider and they save a lot of lifting!


Tiffen Black Pro Mist Filters - Full Set of 5 filters (1/8, 1/4, 1/2, 1 & 2). 4" x 4" Size. I can also supply upon request some Tiffen Filter Pouches as part of this rental for no extra charge.

Reduces Highlights and Lowers Contrast
Softens Wrinkles and Blemishes
Creates a Soft Quality of Light
ColorCore Technology

The Tiffen 4 x 4" Black Pro-Mist Filters help to reduce the value of the highlights while slightly lowering the overall contrast. This filter is especially useful for smoothing out and softening facial wrinkles and other blemishes. While designed for use with movies, this filter can also be used for fashion and beauty applications. Unlike a traditional diffusion or soft focus filter, Pro-Mist filters provide little loss of detail across the image. 

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. These filters each measure 4 x 4" / 101.6 x 101.6mm.

Tiffen 4x4 Pro-Mist Filter Set (1/8, 1/4, 1/2, 1 & 2).

I can also supply upon request some Tiffen Filter Pouches as part of this rental for no extra charge.

This popular motion picture effect creates a special "atmosphere" by softening excess sharpness and contrast. It generates a pearlescent halo around highlights. Lighter grades are useful in toning down the excessive sharpness and contrast of contemporary film and lens combinations.

Great for portraits and scenics
Maintains focus
Often used to mute colours for exquisite pastel tones


Tiffen Black Pro Mist Filters 1/8, 1/4 & 1/2. 4x4" Size.

Reduces Highlights and Lowers Contrast
Softens Wrinkles and Blemishes
Creates a Soft Quality of Light
ColorCore Technology

The Tiffen 4 x 4" Black Pro-Mist Filters help to reduce the value of the highlights while slightly lowering the overall contrast. This filter is especially useful for smoothing out and softening facial wrinkles and other blemishes. While designed for use with movies, this filter can also be used for fashion and beauty applications. Unlike a traditional diffusion or soft focus filter, Pro-Mist filters provide little loss of detail across the image. The 1/8 density provides a very small amount of contrast and highlight reduction and allows for a soft, pastel-like quality of light.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. These filters each measure 4 x 4" / 101.6 x 101.6mm.

Classic Film and Television Clapper Board for Professional use.

Oak Sticks (Detachable).

28cm by 19cm.

The Tiffen 77mm Black Pro-Mist 1/4 Filter helps to reduce the value of the highlights while slightly lowering the overall contrast. This filter is especially useful for smoothing out and softening facial wrinkles and other blemishes. While designed for use with movies, this filter can also be used for fashion and beauty applications. Unlike a traditional diffusion or soft focus filter, Pro-Mist filters provide little loss of detail across the image. The 1/4 density provides more contrast and highlight reduction than the 1/8, but less than the 1/2, while still allowing for a soft, pastel-like quality of light.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.

Pro-Mist filters provide little loss of detail across the image compared to traditional diffusion and soft focus filters.

Especially useful for smoothing out and softening facial wrinkles and other blemishes.

- Sigma Cine 18-35mm & 50-100mm T2 (Canon EF Mount).
- Peli Case (Peli Storm iM2200)

These lenses offer Super 35mm Sensor Coverage and resolution performance up to 8K.

I can also supply a 3-stage clip-on (95mm diameter) mattebox for these lenses (see separate listing).

- Sigma Cine 18-35mm T2 (Canon EF Mount).
- Peli Case (Peli Storm iM2200)

This lens offers Super 35mm sensor coverage and resolution performance up to 8K.

I can also supply a 3-stage clip-on (95mm diameter) mattebox for this lens (see separate listing)

- Sigma Cine 50-100mm T2 (Canon EF Mount).
- Peli Case (Peli Storm iM2200)

This lens offers Super 35mm Sensor Coverage and resolution performance up to 8K.

I can also supply a 3-stage clip-on (95mm diameter) mattebox for this lens (see separate listing).

2 x Avenger C Stands (with arms and knuckles). Also included are 2 x Arri Sandbags.

These C Stands have detachable bases, extend from 1.2m-3m in height and have a 10kg payload.

Great DIY drill! Cordlesss!

We have several drill bits you can use of course just let us know what sizes you need.

You can use this to screw/unscrew as well as drill into walls, wood etc. 

hand detector for detecting power wires,pipes and metal.

 For 18 gauge nails (15 - 32mm) and staples size 15 - 25mm
• Load capacity of 50 nails or staples
Supplied with 100 nails and 100 staples.

Staple gun for your everyday use. Please note that it does not come with the staples. You will have to buy your own 

Bosch Heat Gun
PHG 500-2
Ideal for removing paint

Heavy duty for DIY, repairs and hobby and crafts. 

Takes 10mm and 5mm staples - which you’ll need to provide yourself or pay for the ones you use. 
They can be purchased from Wilko.

 The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use. 

Drives nails and staples

Ergonomic grip for comfort and control

Power adjustment dial and oversize trigger

Quick-release mechanism

Contact safety with non-marring nose provides a flawless finish. Does not include nails and staples. 



The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use.

Drives nails and staples
Ergonomic grip for comfort and control

Power adjustment dial and oversize trigger

Quick-release mechanism

Contact safety with non-marring nose provides a flawless finish. Does not include nails and staples.

Black & Decker Thermal Leak Detector - Draught Temperature Sensor Imager Gun

Description

Location

Item lent by Andrew

Other items from Andrew

Andrew's reviews

FAQs

Black & Decker Thermal Leak Detector - Draught Temperature Sensor Imager Gun

Explore other options around London