The SliderPLUS PRO Medium from edelkrone uses the same unique tracking mechanism found in the SliderPLUS V2, which allows the rails of the slider to move with the camera when mounted on a tripod. This gives the slider 19.2" of sliding range in a unit that is only 17.2" long. Featuring a stronger structure that the SliderPLUS V2, the PRO Medium can support higher load capacities up to 30 lb pounds, for use with professional camera setups. Its compact size makes it ideal for travel, as it takes of up less room in your camera bag than other sliders with a similar sliding range.

H6N Zoom recorder.
Comes with: 

.8gb SD Card 

. USB Cable

. XLR Cable 

Great for live recording as well as studio-quality music production, the H6 offers six tracks of simultaneous recording and four mic/line inputs.

Use it for recording external sound for your short film, interviews and run and gun situation.

GoPro Hero 4 Black. 

Comes with:
. Detachable Touch screen
. Head Mount
. Suction Cup mount
. Tripod mount x 3
. Mini Tripod
. 32gb SD (Sandisk Extreme Pro)  
. Screws x 4
. Skeleton Case
. Waterproof housing
. 3x batteries

GoPro HERO4 Black Specs 
Weight	88g (3.1oz) 152g (5.4oz) (with housing)

Video size / Max fps  4K / 30fps  2.7K / 60fps  1440p / 80fps  1080p / 120fps  960p / 120fps  720p / 240fps  WVGA / 240fps

Video File Format (Codec) MP4 (H.264)

Max Photo Size	12 MP / 4000x3000px

Waterproof to 40m


Fluid Head:
Small and lightweight, the Bogen 701HDV Pro Fluid Video Mini Head is capable of accommodating payloads up to 9.5 lbs, and was designed principally to support the latest digital video equipment, including Mini DV and prosumer/professional grade HDV camcorders.

Tripod Legs:
The Bogen/Manfrotto 290 MT294A3 Tripod Legs builds on the success of the 3011/3021 series, but has been redesigned to offer even better ergonomics of the leg-angle release mechanism, and improved quick action leg locks. While it can reach a maximum working height of 70" (178cm), it can also be used as low as 2.8" (7cm) by using the low angle adapter built in to the center column.

Maximum Height - 73.82" (187.5cm)
Maximum Height w/o Column Extended - 57.87" (147cm)
Minimum Height - 22.84" (57.50cm)
Folded Length - 27.76" (70.5cm)
Leveling Bubble/Illuminated - YES
Weight - 7.39 lbs (3.3kg)

Head:
Counter Balance System - Yes Fixed @ 1.5kg
Quick Release/Wedge Plate - Yes
Balance Plate - With 58mm of Travel
Tilt Drag - Fixed from fluid Cartridges
Tilt Range -  -60/+90°
Tilt Lock - Yes
Spring Loaded Counter Balance - Fixed
Pan Range - 360°
Pan Lock - Yes

Legs:
Material - Aluminum
Head Attachment Fitting - 3/8"
Leg Stages/Sections - 2/3
Leg Lock Type - Flip Levers
Independent Leg Spread - Yes
Spiked/Retractable Feet - Rubber Feet

Leg Lock Type: Flip Lock
Leg Section: 3 Section
Material: Aluminium
Max Height : 190cm
Min Height: 85cm
Type: Photo, Video

Libec HFMP Kit (HFMPKit) Hands Free MonoPod Kit. The HFMP Hands-Free Monopod is a professional video monopod that is specially designed for free-stand operations. It consists of the HFMP monopod, dual base design video head with dual pan handle rosettes, and a carrying case. 
Designed with an exceptional mini tripod structure with increased stability that allows the monopod to stand on its own with a wide range of 4K UHD/HD/DV camcorders and DSLR cameras, allowing you to multi-task and make equipment adjustments in between shots, without the need to lay the monopod on the floor or lean it against the wall. 
This cleverly designed monopod is ideal for those videographers who truly value operability and mobility. The HFMP is your next smart monopod companion for all your photo/video/DSLR needs including home videos, documentaries, corporate assignments, weddings & events, nature, sports and journalist newsgatherings. 

Includes:
1x Libec Hands Free MonoPod 
1x Pan Tilt Fluid Head
1x Sliding plate
1x Carry Case 

3 x Recorders, slim, small, light weight recorders, quick and easy to clip on to anyone making it great for live events, wedding & interviews. 


General info:

BUILT-IN MEMORY
16 GB

BUILT-IN MICROPHONE
Stereo

RECORDING FORMAT
Linear PCM/MP3

PLAYBACK FORMAT
MP3/AAC/WMA/WAV

BATTERY TYPE
Built-In Lithium Battery

MAXIMUM NUMBER OF FOLDER
400

MAXIMUM FILES (TOTAL)
4074

MAXIMUM FILES PER FOLDER
199

CALENDAR SEARCH
Yes

USB CONNECTION CHARGING
Yes

BATTERY TYPE (PROVIDED)
Built-In Lithium Battery

Included:
1x Rode VideoMic Pro
1x Dead Cat wind shield 

General info:
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

BATTERY POWERED
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

VERSATILE COMPATABILITY
The Rode VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

BRAND NEW Sony A7s mk ii camera

Comes with:
- Commlite EF - E Lens Adaptor
- 2x Sony batteries 
- 2x 128GB SD Cards 
- Charger 

Manfrotto Tripod with fluid head with 1x Sony TX-650 Microphone combination 

Canon 70-200 F4 
Comes with 
. Tripod Ring
. Bag
. Lens Hood

PLEASE MESSAGE BEFORE BOOKING!

Sony A7S (MK1) 
Comes with:
. x4 battreies
. x2 128 Sandisk SD Cards
. x1 Dual Port Charger
. Canon EF - Sony E Mount Adaptor 


PLEASE MESSAGE BEFORE BOOKING!

Camera Package Deal:
. Sony A7S1 
. 50mm 1.8
. Rode Vid Mic Pro

Comes with:
. x4 Batteries
. x2 128 SD Cards
. Charger
. Case
. Canon EF - E Mount Adaptor
 

Jahan is an absolute hero. Best lender ever. Cannot be more happy with him or the product. Would strongly recommend. 

Syrp Slider, 160 or 80cm. Adjustable legs and tension. Please note, only available when rented with a camera from my other listings.

Syrp Genie motion control and Slider, 160cm or 80cm. Adjustable legs and tension. Please note, only available when rented with a camera from my other listings.

The Rhino Ultimate Slider Bundle contains: the Rhino Slider EVO PRO 42", the Rhino Motion, the Rhino Arc, 24" Carbon Rails, and a 42" Carrying Case.


The iFootage Shark S1 Camera Slider is a carbon fibre slider. iFootage's original flywheel is what makes this slider different to others. 

It's lightweight and super quick to setup and pack down.

2x Pairs of shark slider track section
2x Slider belt
1x Original flywheel weight
1x Camera carriage
1 x fluid head and camera plate
1x Carry case. 

This slider can be extended up to 1800mm 

Add perfectly smooth shots to your production with this Edelkrone Slider Plus 

- Tracking System for Increased Range
- 15.7" Sliding Range When Tripod Mounted
- 7.9" Sliding Range on Flat Surfaces
- 17.6 lb Load Capacity
- Compact at Only 13.2" Long
- 3/8"-16 Mounting Hole
- 1/4"-20 and 3/8"-16 Tie-Down Screws
- CNC Machined Aluminum Construction
- Steel Ball Bearings

CNC machined aluminum construction
Steel ball bearings
1/4"-20 and 3/8"-16 threaded screws
3/8"-16 threaded mounting hole
Adjustable feet for use on ground or flat surfaces


Materials: 
Temperature treated aluminum rods
Steel ball bearings
CNC machined aluminum parts

Mechanism Type: Non-friction ball bearing; Tracking system

Capacity: 17.6 lb (8.0 kg)

Mounting Interface: 3/8"

Sliding Range:
On Ground: 7.9" (20.0 cm)
On Tripod: 15.7" (40.0 cm)

Suggested Tripod Leg Distance: 70 cm or more between the points that the tripod legs contact the ground
Dimensions (HxWxD) 2.5 x 3.6 x 13.2" (6.4 x 9.2 x 33.6 cm)
Weight 3.3 lb (1.5 kg)


PLEASE ASK AVAILABILITY BEFORE BOOK

Includes:
- slider
- cables
- z folding plate
- remote
- 2x sony batteries
- charges
- bag

Motorised Slider with a controller & cables & battery & charger. Only purchased for rental purposes. Excellent condition. 
Tripod and the camera in the images are NOT included in the rental. 

+ Z Folding Plate 
+ 2x sony batteries for slider

Neewer Motorized Camera Slider, 31.5-inch 2.4G Wireless Control Carbon Fiber Track Rail with Mute Motor/Time Lapse Video Shot/Follow Focus Shot/120 Degree Panoramic Shot for DSLRs, Load up to 22 lbs

 The Trost M100 is a versatile 100cm (40”) slider, uniquely configurable, in a wide range of setups.

With a maximum payload of 254kg, the M100 can easily handle almost any camera setup you throw at it.  Equally at home being used with DSLR or Mirrorless cameras on a 75-100mm bowl head as it is with a RED or Alexa Mini mounted on an O’Connor. Assembled, calibrated and tested by hand.  Probably one of the most precise none motorized sliders out there.

An innovative offset carriage leaves room for Mitchell, 100mm ball, and 75mm ball tie-downs. This allows the slider to maintain an astonishingly low profile – less than 3″ (7.6cm) top to bottom. The result is a low center of gravity that is impossible with conventional slider designs. No more stacking risers on top of your slider.


Mounts on top of Mitchell tripod legs, or 100mm or 75mm bowl tripod with half-ball to 3/8″ adapter (included). Also mounts onto any flat base with male 3/8″ or 1/4″ screw, can be supported on c-stands via built-in c-stand wells.   Also mounts on top of another Trost™ carriage.  

The Glide Gear DEV 235 Slider was developed to allow anyone the ability to create Feature Film quality production shots within a reasonable budget. With aircraft grade, heavy-duty, CNC machined with tight tolerances, precision extruded industrial grade anodized aluminum construction, self-lubricating glide rails, spirit level & adjustable removable feet, the DEV 235 provides more bang for your buck than any other slider on the market in it's price range. The DEV 235 Slider can be used as a stand alone unit with the detachable feet, or you can even attach it directly to your tripod.

Hello, here we have the fantastic 1 meter iFootage Slider, great with any DSLR or mid size camcorder.

There are some cheaper sliders listed on here but this one has a pro belt and fly-wheel, the only way to get true smooth sliding!

It will come with Calumet CK7500 Legs for a solid base. And a Manfrotto Head to attach your camera. So you are good to go out of the bag!

If you use the double extension length you'll need another set of legs or tripod.

Check my other items for cameras, etc. Thanks fro looking.

Kononvo K2 Slider for DSLR cameras with adjustable support legs which can be attached at either end. Comes with carry case and Benro N1 Ball Head.


The Trost M100 is a versatile 100cm (40”) slider, uniquely configurable, in a wide range of setups.

With a maximum payload of 254kg, the M100 can easily handle almost any camera setup you throw at it.  Equally at home being used with DSLR or Mirrorless cameras on a 75-100mm bowl head as it is with a RED or Alexa Mini mounted on an O’Connor. Assembled, calibrated and tested by hand.  Probably one of the most precise none motorized sliders out there.

An innovative offset carriage leaves room for Mitchell, 100mm ball, and 75mm ball tie-downs. This allows the slider to maintain an astonishingly low profile – less than 3″ (7.6cm) top to bottom. The result is a low center of gravity that is impossible with conventional slider designs. No more stacking risers on top of your slider.


Mounts on top of Mitchell tripod legs, or 100mm or 75mm bowl tripod with half-ball to 3/8″ adapter (included). Also mounts onto any flat base with male 3/8″ or 1/4″ screw, can be supported on c-stands via built-in c-stand wells.   Also mounts on top of another Trost™ carriage.  

Camera Slider:
1 x Konova K2 Slider (72cm/28inch)
1 x Carrying Bag

This stunning Rhino Slider with 48"& 24" Rails come With Manfrotto MVH502AH Pro Fluid Video Head and carry case. 
Amazing Production Value!!

A slider is one of the first tools most filmmakers turn to when looking to add "production value" to their films. Im Based in Bethnal Green Shoreditch area East London. 
Please see all photos 
 
Any questions, feel free to get in touch!
PLEASE SHARE LISTING

Ultra portable, powerful, motorized Slider with vertical operation ability + wireless connectivity with motorized heads.

https://edelkrone.eu/products/sliderone-v2

20 lb (9 kg) horizontal carrying capacity
5 lb (2.3 kg) 90° vertical carrying capacity 

1x Edelkrone SliderONE v2
2x Head One
1x Tilt Kit
1x Shutter Trigger Cable
8x Batteries
1x Case

https://edelkrone.eu/products/wing

Edelkrone's Heavy-Duty Wing Pro Slider is a manually-controlled compact slider designed for use with cinema production cameras. Supporting up to 48 lb, the Wing Pro's SteadyMOVE feature uses adjustable, fluid-dampened movement for smooth, gliding linear slides. No need to worry about charging the Wing Pro, this completely mechanical slider is battery-free. Less than 8" in length, the Wing Pro provides up to four times its size in travel distance.


Attach the Wing Pro to your tripod or other support, then grasp your camera or the unit itself to slide up to a total of 1.3' from end to end. Mount your camera to the Wing Pro using the included 3/8"-16 screw, and attach it to your tripod via its 3/8"-16 threaded mount. The Wing Pro Slider is constructed of double-coated, CNC Machined aluminum.

Features
Slides 1.3' from end to end
Fluid-dampened, adjustable manual slide enables smooth, linear moves
Supports cinema production cameras up to 48 lb
Includes a 3/8"-16 camera-mounting screw, and has a 3/8"-16 tripod mount on bottom
Double-coated, CNC Machined aluminum construction

+ Manfrotto Pro Video Head HVH502AH
+ 2x Sony batteries for slider

Neewer Motorized Camera Slider, 31.5-inch 2.4G Wireless Control Carbon Fiber Track Rail with Mute Motor/Time Lapse Video Shot/Follow Focus Shot/120 Degree Panoramic Shot for DSLRs, Load up to 22 lbs

+ Manfrotto Pro Video Head HVH502AH
+ 2x Sony batteries for slider

Neewer Motorized Camera Slider, 31.5-inch 2.4G Wireless Control Carbon Fiber Track Rail with Mute Motor/Time Lapse Video Shot/Follow Focus Shot/120 Degree Panoramic Shot for DSLRs, Load up to 22 lb

PLEASE ASK AVAILABILITY BEFORE BOOK

Includes:
- Konova K2 Slider 80cm 
- Manfrotto MVH500AH, Fluid Video Head 
- Soft carry case

Im Based in Kennington - SE17

To get £20 off on your first rental use this promo code:
fatlama.com/r/gati-09d54

Any questions, feel free to get in touch!

GVM 31" Motorised Slider with automatic panning or parallax motion.  This is achieved with a rod system that pans the camera mount.  The motor speed inself can be adjusted from 1 to 99% and up to 95% is virtually silent.  It gets slightly noisier at its top speed however.  

Includes:
Slider
Motor with battery
Charger
Cables
Case

Location or studio, modular slider, delivering super smooth camera movement using iFootage's original flywheel.

Included in kit:
1 x Shark Slider
2x Extension Bars
1 x Flywheel
1 x Belt
1 x Padded Carrying Case with Shoulder Strap
2x Manfrotto Monopods

TARION TR-SD80 80cm 31" Track Slider Stabilizer Stabilization System with Portable Case for DSLR Video Camera Camcorder Canon Nikon

Adopts 4 adjustable low-resistance roller bearings, higher load-bearing, more smooth and stable. Equipped with standard ARCA SWISS groove, perfect for being directly installed on ball head, no quick-release plate needed.
Scientific and unique design on both ends, block the slide plate and prevent it from impact and scratch. Upgraded ends design bring a maximum use of the track length.
Integrated brake screw design, more efficient and can decrease friction. A rubber pad part on slide plate, anti-slip and shock resistant.
Slide plate support both 1/4" and 3/8" interface for versatile usage. Extra 1/4" and 3/8" interface on both ends, easily fixed on tripods.
Adjustable feet for ideal shooting height.

60 cm Slider. 
For best result prop it on two stands.
Does the job.

Please write to me before requesting I won’t accept requests unless we have already spoken about collection and availability.   

Rhino Slider 24" Pro Evo 

Great Slider with motorised control, for doing smooth moves or timelapse also come with the Arc so you can automatically pan the head as you slide, create stunning cinematic moves. 

Rhino Slider 24"
Rhino Motion Controller
Rhino Arc
Timelapse camera control cable Canon Pro
Timelapse camera control cable standard
Manfrotto Video Head

Please note all our items have a 2 day minimum rental unless rented with one of our Cameras. Thanks

Please see my other listings for great camera, Lens and audio Rentals

Shootools one 60 cm slider is the right slider for every location. 
weight 2.2 kg

One 150  is a motorized slider camera that can guarantee extreme manoeuvre ability combined with a good range of motion. The KIT version, which is a complete package that includes:

slider 150 cm long
motor and belt
motion controller (Movement and timelaps)
connection cables
soft bag in padded cord to hold cables and controllers
soft bag in padded cord to hold the rail

Note: Camera and Tripod not included in rental

||| Please message me before booking in order to check availability - Thanks! |||

Neewer Motorised 0.8m Slider

Please let me know if you need anything else. There’s a good chance I’ll have it!

The Rhino Ultimate Slider Bundle contains: the Rhino Slider EVO PRO 42", the Rhino Motion, the Rhino Arc, 24" Carbon Rails, and a 42" Carrying Case.

PLEASE ASK AVAILABILITY BEFORE BOOK

Includes
- Konova K2 Slider 80cm + CY Beike Pro Metal Ball Head

After request
- Delivery

Sign up with this promo code and get £20 off of your first rental
https://fatlama.com/r/dita-03098

THERE IS MORE
www.instagram.com/baumanevent

Location SE17
Konova K2 Slider 80cm + CY Beike Pro Metal Ball Head

The K3 range is Konova’s entry-level model, designed for DSLRs and other small bodied cameras. Made from durable aluminium and steel, Konova sliders are built to last and allow users to create fluid and dynamic movements with ease.
Made in Korea, Konova sliders have been manufactured using high quality aluminium, with the steel rods and bearings ensuring smooth movement and high durability.

The K3 is the most economical slider and is made for DSLRs and other small cameras such as the Blackmagic Pocket Cinema Camera in mind.

Mounting & Levelling
The underside of the main rail features three mounting points; one in the centre and one at each end. All three positions feature both 1/4” and 3/8” threads, so mounting on a tripod or other support can be done through these industry standard connections.

Built-in to the top of the rail is a small bubble level, making the crucial levelling process far easier.

Either end of the slider, where the articulated feet attach, are further 1/4” threads, so it’s possible to mount the slider fully vertically if required.

The main carriage features a 3/8” male thread, so industry standard tripod heads, such as the Manfrotto 500AH or 502AH will attach seamlessly.

1 x Slider.
2 x Leg.
1 x Leg pouch.
1 x Bag.
1 x MVH500AH Video Head
1 x Camera Plate
1 x Video head handlebar

Konova K2 Slider 80cm + CY Beike Pro Metal Ball Head

TARION TR-SD60 slider dolly stabilizer system is specially designed for stable continuous filming. It can be widely used on all kinds of professional camcorders, SLR, DSLR cameras, etc.


1 x Konova K2 80cm Slider
1 x Joby Pro Metal Ballhead
2 x Stand Legs
1 x Carry Case

The Rhino Ultimate Slider Bundle contains: the Rhino Slider EVO PRO 42", the Rhino Motion, the Rhino Arc, 24" Carbon Rails, and a 42" Carrying Case. 

The the Kessler Pocket Jib Pro is a robust, reliable, lightweight, yet very functional and easy to use Jib/mini crane with surprisingly high weight capacity. Extending from 4ft to 8ft it’s rated for payloads up to 23KG wether retracted or fully extended. Now also comes with a super solid base in the form of the, Kessler K-Pod tripod an exceptionally light but solid aluminium tripod base to build the system on (optionally with wheels) and including additional Sachtler legs, Kessler Swivel head, weights, and a Vinten Protouch Pro6 HDV fluid head with counter balance for the lighter camera builds and an E-IMAGE 7983H or Sachtler Video 20 head for heavy camera set ups.                                         

This package also comes with the Trost M100 Slider which is perfectly compatible with all fluid heads, a unique rock solid low profile offset carriage, and the Slider mounting quickly onto tripod legs via 100mm ball adapter “tie downs”. It is especially useful mounted directly onto the Pocket jib (as pictured) for a supper sold platform or for easy positioning of slanted slider shots - this makes the Pocket Jib into a dual function production machine!!
                                                                                                                   - The Pocket Jib weighs 9.5Kg on its own
- Collapsed length roughly 4 foot.                                                             - Trost M100 Slider weighs 8.16Kg                              

Get in contact if you have any question or need any further assistance.

|||  Please message me before booking in order to check availability - Thanks!  |||

Awesome Carbon Fibre 1m Slider + Manfrotto Pro Video Head

Brand new condition. The best slider setup on Fat Lama! 

Let me know if you need anything else because I have a LOT! 

Allows HeadONE to turn products on it.

Includes;
1x HeadOne
1x White Matt Plate
1x Black Glossy Plate

Edelkrone Slider PLUS / camera slider

Description

Location

Item lent by Jahan

Other items from Jahan

Jahan's reviews

FAQs

Edelkrone Slider PLUS / camera slider

Explore other options around London