Great guitar amplifier, 100 watts. The treble knob doesn't have the indicator on it but it works fine.

Small drive guitar amplifier (10watts) - Happy to sell it for 15quid

Trace Elliot - ELF BASS AMP Compact Bass Guitar Amplifier Stock Code: TEELF INFORMATION Good things come in small packages, and now Trace Elliot® can add "small yet powerful" to that saying with the introduction of the ELF bass amplifier. Weighing just 1.6 pounds, this revolutionary amp is small enough to fit in your back pocket. The ELF’s remarkable technology and size make it the most portable, gig-worthy amplifier ever made. It’s an ideal solution for any bassist who is concerned with size and weight, but isn’t willing to compromise on tone or performance. FEATURES • Wide range input gain control with signal level indicator • 3-band rotary equalizer that emulates the response of classic Trace Elliot multi-band graphic EQ filters • Ultra-high preamp input impedance (>10meg ohms) for maximum sensitivity when using passive pickups • Post EQ balanced XLR DI output with ground lift for sending classic Trace Elliot tone to a mixing console or recording device • 1/4" (6.35mm) headphone output for quiet practice. SPECIFICATION • 200W continuous into 4 ohms / 130W continuous into 8 ohms • Extremely portable 1.60 lb (0.73Kg) • Dimensions: W = 6.75" (17.1 cm) D = 4.10" (10.4 cm) H= 1.35" (3.4cm) - - - NOTES Please call if you need any more information or to pay by card.

Peavey - VYPYR PRO 100 Combo Amplifier Stock Code: PVVPP100 INFORMATION The VYPYR® Pro 100 continues the tradition of appropriate technology using four stages of exclusive TransTube® analog gain to create the most realistic tube sounding distortion in any modeling amplifier, ever. By using analog distortion, the digital processor has the amazing ability to offer almost limitless combinations of additional stompboxes, “rack” effects, amplifiers and now even instrument models. Because of the advanced dual processor design, the VYPYR can run up to four amplifier models in parallel. Using the amplifier’s unique architecture, it is capable of designing a variety of signal path combinations. Four module bays, each with their own LCD, can be assigned to an amplifier, effect, or stompbox, or in the first position an instrument model. The modules can be assigned in any order, allowing the user the ability to create the rig they desire, even if they want to run two or up to four amplifiers in parallel. With up to five parameters to precisely control effects, multiple delay types and advanced features such as MSDI (microphone simulated direct interface) direct output, effects loop, and MIDI control, the professional player can create the rig of their dreams inside a single combo amplifier. Recording is a mainstay of the design with the most advanced USB audio system in any VYPYR. It also features an analog speaker and microphone simulated direct out. With over 500 presets available and more than 100 different models of effects, reverbs, delays and amplifiers, this the most innovative and advanced amplifier on the planet. FEATURES • Over 100 different amp, effect, stompbox and instrument models • Advanced WYSIWYG interface • Four tone model modes with LCD • Real time control over Delay and Reverb • Real time model parameter control • Advanced bi-directional USB connector • On-board Tap Tempo • Studio quality headphone out • MP3/CD/Aux input • MIDI • Analog TransTube® preamp • 100 Watts • Custom voiced 12" speaker • Over 500 user presets • Multi-parameter effects control • Dual DSP’s for processing speed and capability • Power Sponge™ output power adjustment • On-board chromatic tuner • On-board overdubbing looper (with optional Sanpera® footswitch) • Effects loop • 3 adjustable noise gates • Multiple delay and reverb types: tape delay, tube delay, multi-tap delay, modulation delay, analog delay, digital delay, plate verb, room verb, cathedral verb, hall verb, tile verb, gated verb, spring verb • Presence and Resonance adjustment • Assignable input attenuator • Built-in microphone simulated direct out. SPECIFICATION To_Follow - - - NOTES Please call if you need any more information or to pay by card.

60 watt acoustic guitar amp. Works great for acoustic guitar or for a duo setup, with inputs for guitar and a microphone (could equally be used as a keyboard amp, I just haven't used it for this). Really clear sound and easily fills a room. I use it all the time for weddings and for pub gigs etc, both with and without vocals. Comes with a cover and can be easily twisted onto a standard microphone stand as pictured (you can rent this as well for an additional £5 a day).

Perfect condition, single channel, tube amp. 15 watts, sounds great and I regularly use it at all kinds of venues. Has a great clean and overdriven sound. I bought it new several years ago and have never had any problems with it. Please let me know if you have any questions!

Beautiful sounding amplifier. Beautiful condition.  

The EastCoast G10R is a brilliant amp for learning the guitar on thanks to it's small size, great tones and unlike most other practice amps around the same price, the built-in Reverb. It's only 10w which means it isn't loud enough to disturb the neighbours but has got a headphone output if you want to keep the noise down while learning.

Laney AMP
Hardcore Max HCM30B combo 
Practice bass amp, a great amp for someone who is looking to start playing bass...great tone


Citronic - PPX600 Power Amplifier Slave Amp Stock Code: 172.206UK INFORMATION 19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter. FEATURES • Bridge mode for high power mono operation  • Switchable clip limiter  • Removable handles for low profile install SPECIFICATION • Power supply: 240Vac, 50Hz (IEC)  • Controls: Level channel 1, level channel 2, ground, mode, clip limiter  • Input impedance: 20k ohms  • Frequency response: 5Hz - 50kHz  • Total harmonic distortion: 0.05%  • Slew rate: 40V/us  • Damping factor: >400  • Protection: Short-circuit, overload, D.C. and thermal protect - - - NOTES Please call if you need any more information or to pay by card.

Peavey - KB4 Keyboard Amplifier 4 Channel Combo Amp Stock Code: PVKB4 INFORMATION Hartley Peavey is living proof that necessity is the mother of invention. As a teenager, whenever he needed an amplifier for his bands, he just reached for his soldering iron. But in 50+ years of building quality music gear for musicians around the world, he’s learned that sometimes versatility is the mother of them all. The KB® Series gives musicians the power and reliability they need with a feature set that brings everything together in one convenient package. KB amps do much more than just amplify keyboards – they’re complete sound systems for your band rehearsals or live performances. With up to five independent channels, you can run your keyboard plus a vocal mic, guitar, bass, drum machine, backing tracks, sampler – the possibilities are wide open. FEATURES • 15" speaker and tweeter • 75 watts / 100 watts with external speaker • Channels 1 & 2 have stereo 1/4" inputs • Channel 3 features stereo 1/4" and mono XLR inputs • Channel 4 features 1/4" monitor input • Stereo mixer with 2-band EQ and main effects send/return • Mic / Line channel with 3-band EQ and effects send/return • Monitor input with level control and assign • Headphone out with level control • Built-in casters and handle for easy moving • 4 Channel. SPECIFICATION • Dimensions (HxWxD): 24" x 23.8" x 18.3" / 610 x 605 x 465mm • Weight: 72lbs / 32.2kg - - - NOTES Please call if you need any more information or to pay by card.

Citronic - PPX 300 Power Amplifier Slave Amp Stock Code: 172.203UK INFORMATION 19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter. FEATURES • Bridge mode for high power mono operation  • Removable handles for low profile install  • Switchable clip limiter SPECIFICATION • Power supply 240Vac, 50Hz (IEC)  • Controls Level channel 1, level channel 2, ground, mode, clip limiter  • Input impedance 20k ohms  • Frequency response 5Hz - 50kHz  • Total harmonic distortion 0.05%  • Slew rate 40V/us  • Damping factor >400  • Protection Short-circuit, overload, D.C. and thermal protect - - - NOTES Please call if you need any more information or to pay by card.

Peavey - KB5 Keyboard Amplifier Combo Amp Stock Code: PVKB5 INFORMATION The KB® Series gives musicians the power and reliability they need with a feature set that brings everything together in one convenient package. KB amps do much more than just amplify keyboards – they’re complete sound systems for your band rehearsals or live performances.   With up to five independent channels, you can run your keyboard plus a vocal mic, guitar, bass, drum machine, backing tracks, sampler – the possibilities are wide open. FEATURES • 150 watts/200 watts with external speaker  • Stereo mixer with 2-band EQ and main effects send/return  • Mic/line channel with 3-band EQ and effects send/return  • Monitor input with level control and assign  • Headphone out with level control  • Built-in casters and handle for easy moving  • Two 10 inch speakers and horn  • Weight Unpacked: 85.80 lb(38.918 kg)  • Weight Packed: 96.00 lb(43.545 kg)  • Width Packed: 21.25"(53.975 cm)  • Height Packed: 28.25"(71.755 cm) SPECIFICATION • Dimensions (HxWxD): 619mm x 605mm x 465mm  • Weight: 85.8lbs / 39kg - - - NOTES Please call if you need any more information or to pay by card.

Peavey - VYPYR VIP 1 Combo Amplifier Stock Code: PVVPV1 INFORMATION Not only does the amplifier morph from a bass amp to an acoustic amp, to an electric amp, it also allows the electric guitar player access to instrument models as well The realistic simulations allow users to manipulate the sound of their electric guitar to mimic an acoustic guitar, a bass, a 12-string guitar, and more! Using a SHARC processor and Peavey’s exclusive TransTube® analog circuitry creates the best sounding modelling amplifiers available. All VYPYR effects, amp models and parameter controls can be accessed via the amp itself, with no need to hook the amplifier to a computer. Peavey’s control surface quickly allows the user the ability to see and adjust the control position. VYPYR’s USB bi-directional data and audio port provide an easy way to record, connect to our VYPYR software and store presets, get lessons, and practice to backing tracks while connected to your computer. FEATURES • Variable Instrument Input (Electric, Acoustic, & Bass) • 20 watts RMS • 8" Custom Voiced Heavy Duty Speaker • Acoustic Guitar Simulation • Bass Guitar Simulation • Two Bass Amp Models • Two Acoustic Amp Models • Onboard Looper* • WYSIWYG LED Indicator Controls • Bi-directional USB (Data-MIDI-Audio Record Out) – iOS Device Compatible**. SPECIFICATION • Dimensions (HxWxD): 15" x 16.6" x 8.5" / 381mm x 421mm x 216mm • Weight: 17.5lbs / 7.93kg • • • *Activated with optional Sanpera® foot controller • ** Requires optional camera connection kit - - - NOTES Please call if you need any more information or to pay by card.

American Audio - VLP2500 Amplifier Slave Amp Stock Code: 1141000012 INFORMATION • Output Power:   1100W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD    700W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD FEATURES • Bridge Mode, Mono    2200W RMS @ 8 Ohms, 1K Hz, 1% THD  • Total Harmonic Distortion: Less Than 0.5% (20Hz• 20kHz @ 8 Ohms)  • Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz• 20K Hz  • Slew Rate: 20V Per usec  • Damping Factor: @ 8 Ohm: >450  • Impedance: 20 K Ohms balanced / 10 K Ohms unbalanced  • Cooling System: 2 indivdual fans (various speed)  • Special Features: High/Low Pass Filter/Input, Soft Start Sensitivity Selector/Ground Lift  • Output: Speaker + Binding post SPECIFICATION • Dimensions (LxWxH): 453 x 482 x 88mm 2-rack mount space  • Weight: 22,6kg OPTIONS Specifications subject to change without notice. - - - NOTES Please call if you need any more information or to pay by card.

adastra - Adastra LA 300 Mk2 Induction loop amplifier Stock Code: 952.864UK INFORMATION An induction amplifier for driving a cable loop around a room to provide assisted listening for hearing aid users. Front panel controls are adjusted using a screwdriver including level controls for the 3 mic/line channels, bass, treble and loop current. Designed to provide hearing assistance in public and commercial buildings. FEATURES • Phantom power switch for each input • Mic/line level switch for each input • Adjustable metal loss correction • Alarm contacts for built-in siren • 19" rack mountable • Tamper proof channel volume, bass & treble and loop current level controls • Priority switchable for channel 1 • Peak current LED indication • Suitable for hearing aids fitted with a "T" switch SPECIFICATION • Power supply: 110/240Vac, 50/60Hz (IEC) • Frequency response: 50Hz• 5kHz ( 3dB) • Input sensitivity : line: -6dBu/6k Ohms • Input sensitivity : mic: -56dBu/2k Ohms • Signal to noise ratio: 75dB (line), 60dB (mic) • THD: <1% - - - NOTES Please call if you need any more information or to pay by card.

adastra - Adastra RMC120 mixer amp 120W with CD/USB/SD/FM Stock Code: 953.141UK INFORMATION 100V line mixer-amplifier with integral sound source. 5 input channels include a balanced XLR microphone input with switchable phantom power and Vox override, 2 mic/line jack inputs and 2 RCA line inputs. A built-in CD player provides audio playback alongside a USB/SD media player with an integral FM radio tuner. Bass & Treble EQ and Master volume control the overall output, which can power either low impedance or 100V line speakers. A comprehensive solution for commercial sound installations. FEATURES • 5 input channels • USB/SD/FM audio player • Slot load player for standard audio CDs • External D.C. power option • 8 Ohms or 100V line speaker output • 2U 19" rack mountable • Supplied with rack-mount ears SPECIFICATION • Dimensions: 433 x 320 x 89mm • Weight: 9kg • Power supply: 110/240Vac, 50/60Hz (IEC) • DC power: 24Vdc (screw terminals) • Output : signal: 2 x RCA • Inputs: Mic XLR, 2 x mic/line jack, 2 x RCA line • Controls: Mic1, mic/line2+3, line4+5 (USB), bass, treble, master volume • Equalizer : bass: 100Hz  10dB • Equalizer : treble: 10kHz  10dB • Audio source: Integral CD player & USB/SD/FM module • Rear panel switches: Phantom, Vox, Mic/Line (2 + 3) • Phantom power: +20V (MIC 1 input) • THD: <1.0% • Output power: 120Wrms • Outputs : speaker: 100V / 8 Ohms / COM terminals • Input sensitivity : mic 1 (balanced): -53dBV • Input impedance : mic 1: 5k Ohms • Input sensitivity : line (unbalanced): -15dBV (-18.5dBV line 5) • Input impedance : inputs 2-5: 1k Ohms - - - NOTES Please call if you need any more information or to pay by card.

Citronic - PLX2800 Power Amplifier 2 x 1050W @ 4 Ohms Slave Amp Stock Code: 172.216UK INFORMATION 19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter. FEATURES • Bridge mode for high power mono operation • Output stable down to 2 Ohms • Removable handles for low profile install • Switchable clip limiter SPECIFICATION • Power supply: 230Vac, 50Hz (IEC) • Controls: Level channel 1, level channel 2, ground, mode, clip limiter • Input impedance: 20k ohms • Frequency response: 5Hz• 50kHz • Total harmonic distortion: 0.05% • Slew rate: 40V/us • Damping factor: >400 • Protection: Short-circuit, overload, D.C. and thermal protect • Dimensions: 482 x 453 x 88mm (2U) - - - NOTES Please call if you need any more information or to pay by card.

American Audio - VLP1000 Amplifier Slave Amp Stock Code: 1141000013 INFORMATION • Output Power:  •    500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD  •    330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD FEATURES • Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD  • Total Harmonic Distortion: Less Than 0.1% (20Hz• 20kHz @ 8 Ohms)  • Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz• 20K Hz  • Slew Rate: 15V Per usec  • Damping Factor: @ 8 Ohm: 300  • Impedance: 20 Ohms balanced / 10 Ohms unbalanced  • Cooling System:  2 individual fans  • Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter  • build in clip limiter  • Input: XLR 3pin + Jack 6,3mm  • output: Speaker + Binding post SPECIFICATION • Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces  • Weight: 15 Kgs. OPTIONS Specifications subject to change without notice. - - - NOTES Please call if you need any more information or to pay by card.

adastra - Adastra LA 600 mkII induction loop amplifier Stock Code: 952.867UK INFORMATION An induction amplifier for driving a cable loop around a room to provide assisted listening for hearing aid users. Front panel controls are adjusted using a screwdriver including level controls for the 3 mic/line channels, bass, treble and loop current. Designed to provide hearing assistance in public and commercial buildings. FEATURES • Phantom power switch for each input • Mic/line level switch for each input • Adjustable metal loss correction • Alarm contacts for built-in siren • 19" rack mountable • Tamper proof channel volume, bass & treble and loop current level controls • Priority switchable for channel 1 • Peak current LED indication • Suitable for hearing aids fitted with a "T" switch SPECIFICATION • Power supply: 110/240Vac, 50/60Hz (IEC) • Frequency response: 50Hz• 5kHz ( 3dB) • Input sensitivity : line: -6dBu/6k Ohms • Input sensitivity : mic: -56dBu/2k Ohms • Signal to noise ratio: 75dB (line), 60dB (mic) • THD: <1% - - - NOTES Please call if you need any more information or to pay by card.

Peavey - MAX 115 BASS Combo Amplifier Stock Code: PVMX115 INFORMATION With power ratings up to 300 watts with Peavey’s DDT™ speaker protection and exclusive tone enhancements, the Peavey MAX® Series is designed for superior tone, performance, and reliability in bass amplification. Peavey MAX bass combo amps deliver huge bass tone with exclusive Peavey designs, including unique  Psycho-acoustic low-end enhancement that adds bass without demanding anything extra from the speaker – a testament to Peavey’s technology-driven reliability. FEATURES • 300 watts into 8 ohms  • DDT™ speaker protection  • Pre-gain control with TransTube® gain boost, which automatically turns off the tweeter for more authentic, classic tone  • 3-band EQ with Punch, Mid-shift and Bright controls  • 15” speaker with high frequency tweeter  • Psycho-acoustic low end enhancement  • Built-in direct output with ground lift  • 1/8” aux input  • 1/8” phones output  • Chromatic tuner  • Tuned, ported enclosure. SPECIFICATION • Dimensions (HxWxD): 613mm x 477mm x 362mm   • Weight: 50lbs / 22.68kg - - - NOTES Please call if you need any more information or to pay by card.

Pulse - PLA900 Power Amplifier 2U 760W Slave Amp Stock Code: DP32722 INFORMATION The PLA series from Pulse are 2 Channel stereo power amplifiers which are suitable for live music, mobile DJ or Installation. FEATURES • 760W Professional stereo power amplifier  • Output Power (RMS): 2x380W @ 4R, 2x250W @ 8R  • Class AB amplifier  • Detented rotary volume controls  • Power, clip & protect LED indicators  • LED VU meter for signal level monitoring  • Over temperature and neutral DC protection  • Constant fan cooling  • Rugged steel enclosures with integrated front 19" rack mount ears  • Inputs: 2x Unbalanced 6.35mm (1/4") jack sockets  • Outputs: 2x Locking speaker sockets SPECIFICATION • Frequency Response Max: 50 Colour: Black External Depth: 360 Power Rating RMS: 760 External Width: 482 Output Power @ 8ohm: 250 Frequency Response Min: 10 Weight: 15 Signal to Noise Ratio: 95 Output Power @ 4ohm: 380 No. of Outputs: 2 External Length / Height: 88 SVHC: To Be Advised Supply Voltage V AC: 240 No. of Inputs: 2 - - - NOTES Please call if you need any more information or to pay by card.

Cloud - AMPLIFIER 00V LINE 4 x 250W Stock Code: DP32593 INFORMATION The Cloud CXV425 is a high power (250W/Ch.), multi-channel audio amplifier intended for use with high quality PA and background music systems in offices, hotels, factories, leisure facilities and other commercial and industrial premises. It is designed to drive 100V line speaker systems directly, and do not employ an output transformer which produces a considerable saving in weight and a significant improvement in audio quality. FEATURES • Transformerless output stage for directly driving 100V line systems  • Number of outputs: 2  • Output power: 250W per output channel  • Output stage clip limiter  • Output DC protection  • Thermal protection  • Switch-on delay for speaker protection  • Protect, peak and signal LEDs per channel  • Balanced line inputs (0 dBu)  • Level controls (Per ch.)  • Adjustable high-pass filter, 20Hz-200Hz (Per Ch.)  • Variable speed fan cooling  • Optional Bose® EQ cards available (Per Ch.)  • Optional VCA cards available (permits remote volume control per Ch.)  • Compatible with Cloud RL-1 remote volume control panel SPECIFICATION To_Follow - - - NOTES Please call if you need any more information or to pay by card.

Clever Acoustics - ZM 8 Zone Matrix System Stock Code: CRAM19 INFORMATION The ZM8 Zone Mixer allows 8 signal sources plus 2 dedicated paging microphones to be routed into 8 separate zones, expandable up to a total of 32 zones with additional ZM8's. Each zone can be controlled remotely via a wall plate, which offers great flexibility, whilst control is also available centrally via the front panel. In addition to offering control of level and source, the dedicated wall plates can allow a further balanced line input for each zone for connection of a local source, local microphone input or auxiliary input. Installation of the plates requires simple, easy connection via standard RJ45 terminated CAT5 cables. The ZM8 zone mixer offers a complete solution for multi-zone venues. FEATURES • Outputs: 0.775V / 600*Ohm • Frequency response (MIC): 80Hz18KHz (+1/3dB) • Frequency response (Line): 20Hz20KHz (+1/3dB) SPECIFICATION • Power supply: 110V/60Hz and 240V/50Hz or DC 24V • Power consumption: 20W • Dimensions (H x W x D): 132 x 484 x 304mm • Weight: 10.3kg - - - NOTES Please call if you need any more information or to pay by card.

American Audio - VLP600 Amplifier Slave Amp Stock Code: 1141000010 INFORMATION To_Follow FEATURES • Output Power:  • 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD  •    200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD  • Bridge Mode, Mono  •    600W RMS @ 8 Ohms, 1K Hz, 1% THD  • Total Harmonic Distortion: Less Than 0.1% (20Hz• 20kHz @ 8 Ohms)  • Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz• 20K Hz  • Slew Rate: 15V Per usec  • Damping Factor: @ 8 Ohm: 300  • Impedance: 20 Ohms balanced / 10 Ohms unbalanced  • Cooling System:  2 indivdual fans  • Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter, build in clip limiter  • Input: XLR 3pin + Jack 6,3mm  • output: Speaker + Binding post SPECIFICATION • Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces  • Weight: 33 lbs. / 15 Kgs. - - - NOTES Please call if you need any more information or to pay by card.

American Audio - VLP1500 Amplifier Slave Amp Stock Code: 1141000011 INFORMATION • Output Power:  •    675W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD FEATURES •   450W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD  • Bridge Mode, Mono  •   1400W RMS @ 8 Ohms, 1K Hz, 1% THD  • Total Harmonic Distortion: Less Than 0.1% (20Hz• 20kHz @ 8 Ohms)  • Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz• 20K Hz  • Slew Rate: 15V Per usec  • Damping Factor: @ 8 Ohm: 300  • Impedance: 20 K Ohms balanced / 10 K Ohms unbalanced  • Cooling System:  2 individual fans  • Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter  • build in clip limiter  • Input: XLR 3pin + Jack 6,3mm  • output: Speaker + Binding post SPECIFICATION • Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces  • Weight: 42 lbs. / 19 Kgs. OPTIONS Specifications subject to change without notice. - - - NOTES Please call if you need any more information or to pay by card.

Citronic - QP2320 Quad Power Amplifier 4 x 580W Slave Amp Stock Code: 172.243UK INFORMATION A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers. Designed as a cost effective and efficient solution for multi speaker installations where sound quality is paramount. FEATURES • Fully balanced signal path  • Stable down to 2 Ohms  • 2U rack-mountable SPECIFICATION • Power supply: 230Vac, 50Hz (IEC)  • Controls: 4 x channel gain  • Dimensions: 483 x 439 x 88mm  • Input : line: 4 x XLRF balanced  • Output : line: 4 x XLRM (parallel from inputs)  • Speaker outputs: 4 x SPK connectors  • Input impedance: 20k Ohms  • Frequency response: 5Hz• 50kHz  • THD: 0.05%  • Slew rate: 40V/usec  • S/N ratio: 103dB  • Circuit protection: Short-circuit, DC, overload, soft-start - - - NOTES Please call if you need any more information or to pay by card.

Pulse - APB1400 Power Amplifier 2 Channel Slave Amp Stock Code: DP33507 INFORMATION 2 Channel stereo power amplifier which is suitable for live music, mobile DJ or Installation FEATURES • 1700W Class H amplifier • Rotary gain controls • Power, signal, clip, protect, bridged & parallel LED indicators • Stereo, bridged and parallel output modes • Switchable GND lift, clip limiter, input sensetivity & output modes • Short circuit, overload & thermal protection • Dual fan cooling • 2U 19" Rack mountable • Inputs: XLR (with parrallel XLR Link outs) • Outputs: 2x Locking speaker sockets, Binding posts SPECIFICATION • Output Per Ch. @ 2  (RMS): 1000W • Output Per Ch. @ 4  (RMS): 700W • Output Per Ch. @ 8  (RMS): 400W • Output Bridged @ 4  (RMS): 1700W • Output Bridged @ 8  (RMS): 1250W - - - NOTES Please call if you need any more information or to pay by card.

Fully working Marshall Valvestate with great OD channel and built in reverb. Great condition and perfect for gigs and studio work!

Marshall amplifier MG 15CD in great condition. Comes with a 3m Fender lead

The Yamaha THR10 is the ultimate desktop-sized, portable lunchbox guitar amp, designed for players that want great valve modelled tone anytime, anywhere.

Traditionally, desktop and mini amps come equipped with a limiting amount of effects, tone shaping controls and functionality. The Yamaha THR10 changes the game, fully kitted out with all the tone control and modelling settings you'll ever need to jam out at home.

With USB connectivity and a lightweight, vintage-style metal enclosure, the THR10 is well equipped for life on a coffee table, studio desk or wherever inspiration strikes

Solid combo amplifier that’s nice and small and very loud if you need the volume and easy to drive even at low volume because if the separate Master Volume and Volume controls.  Very nice tone from this vintage Solid State amplifier.   Has two channels, spring reverb, will come with along with a high quality guitar cable 

Fender Blues Junior III Guitar Amp

Great, compact guitar amp that can make a racket and has an amazing reverb.

Included:
- Amp
- Fender soft cover
- Spare valve

Please don't hesitate ask if you have any questions :)

vintage 70s Wem Watkins amp head. Sounds amazing, and it is solid state, but sounds warm, vintage and lovely. Will work equally as well for bass, vocals or keys (I have tried the latter and can confirm it sounds great). 


This tiny "practise" amp, made in the USA in 1974, is a real secret weapon for tracking guitars in the studio. Drive it hard as you like and stay friends with the neighbours. As used by Frank Zappa and others who knew back in the day.

Beautiful 1970's lead tones in a tiny box!

Runs on mains via included PSU, or with a 9V battery!

The Orange AD 5 COMBO Guitar All Valve Amplifier Combo, 5 Watts, 1 X 10 inch Celestion Speaker, single ended. Smooth, warm vintage amp sounds. The Orange AD 5 COMBO 5 Watt Single Ended, 1 x 10 inch Combo guitar amp.

Sounds great even at v low volume.

This classic was originally available in the early 2000's and only produced in very limited numbers. Since then it has become a real collectors piece, even being listed in Aspen Pittman's Groove Tube's book.


The Alpha Plus Acoustic Amp is a professional compact and powerful piece of kit. It has dual mic/XLR inputs, offers 50 watts of power and a bigger cabinet for its twin cone speaker system producing lightning fast response and incredible authenticity in its sound reproduction. Although designed for the enhancement of acoustic instruments, it is also suitable for use with electrical instruments. It has 48V phantom power on its XLR input - ideal for plugging a DPA microphone in it. 

Great for solo or duo gigs, nicely fills a room. Can be used with keyboards, within caution.

More portable than the Compact 60.

Local Pick up preferred as it is a bulky item, can be flexible depending on nature of rental.



Inputs:

Input 1 - line mode (jack only) or mic mode (jack or XLR)
Input 2
Return
Clip LED
Outputs:

Headphones
Line Out
Tuner
DI-out
Send
Tone Controls:

Colour (Input 2)
Bass
Middle
Treble
Power:

Power amp: 40 W / 4 Ω at 1 THD, DMOS, monolithic I.C. Dynamic range, A-weighted: 92 dB
Limiter: Threshold 35 W / 4 Ω
Analog signal processing: Subsonic filter, adaptive peak limiter
Speaker system: 8" (200 mm) twin cone full-range speaker, bass reflex enclosure
Mains power: Mains voltage (depending on model): 100, 120, 230, or 240 V , 50-60 Hz.
Power consumption: max. 100 W
Mains fuse: Size: 5 x 20 mm, For 230 and 240 V models: T 1 A L, For 100 and 120 V models: T 2 A L 

Guitar amp in great in excellent condition with footswitch.

Full specs here:
https://www.blackstaramps.com/uk/products/id60-tvp

 Vox Valvetronix VT30 electric guitar amp. Comes with in-built effects such as delay, echo, chorus, flanger, phaser, rotary, tremolo and pitch 

 Great guitar amp available for hire. It has 30 watts of power and can get pretty loud! It is also a modelling amp which can simulate many different amp models like the classic Fender stack and somehow even an acoustic guitar. There is also onboard effects such as delay, reverb, chorus, tremolo and phaser. Great amp for rock, metal and blues players and ideal as a practice or recording amp. Check this model out on YouTube if you'd like to hear how it sounds.

Loud guitar amp with multiple channels, fx, distortion and with switch pedal.

Great little acoustic guitar amp - see second photo for effects. Condition is as new - only ever used for bedroom practice although is suitable for busking: can run for 6 hours using AA batteries (mains power also included). 

Guitar Amplifier - Marhsall Mg100DFX

Description

Location

Item lent by Dom

Other items from Dom

FAQs

Guitar Amplifier - Marhsall Mg100DFX

Explore other options around London