Description

5-in-1 Multi-Tool Grass Trimmer: Supplied with a 2-string nylon cutting head with a cutting width of 430mm, you can quickly and efficiently cut through overgrown grass and trim the edges of your lawn. The bump-feed system allows you to effortlessly dispense more cord without interrupting your gardening. Brushcutter: For thicker and tougher foliage, the brushcutter attachment allows you to cut through tougher brambles, dense scrub and other...

harsh overgrowth with ease. Pole Saw: The included pole chainsaw attachment has automatic chain lubrication for longer life and reduced wear and tear. The 295mm cutting bar is suitable for all but the biggest of logs and branches. Hedge Trimmer: With a blade length of 425mm, the hedge trimmer is built to prune large hedges with ease. It can be adjusted 180 degrees, with 12 positions to choose from with a double safety lock to keep the cutting head securely in place. Extension Shaft: Providing approximately 800mm of extra reach (allowing you to reach up to 4m in total), the quick-release extension shaft is a convenient addition for gardeners who have tall trees or hedgerows on their property, eliminating the dangers of working from a ladder. Model HYMT5200X Start Method Recoil Grass Trimmer Cutting Width (mm) 430 Line Diameter (mm) 2.4 - 2.5 Number of Lines 2 Bump Feed Head Yes Max Cutting Speed (RPM) (Grass Trimmer) 6525 Brushcutter Width (mm) 255 Brushcutter Blade Type 3 Blade Steel Max Cutting Speed (RPM) (3 Tooth Blade) 6900 Hedge Trimmer Cutting Length (mm) 425 Hedge Trimmer Tooth Spacing (mm) 20 Hedge Trimmer Cutting Capacity (mm) 24 Max Cutting Speed (RPM) (Hedge Trimmer) 1550 Chainsaw Bar (inches) 10 Chain Lubrication Automatic oil pump system Chain Speed (RPM) (m/s) 20 Handle Type Loop and Bar With Harness? Yes Shaft Aspect Straight Split Shaft? Yes Clutch Type Centrifugal Engine Model 52cc 2-Stroke EURO 5 emissions Engine Type 2-Stroke, Single Cylinder Engine Size (cc) 52 Rated Power (kW/kVA) 1.45/2 Rated Speed (RPM) 9200 Fuel Petrol/Oil Mix Fuel Capacity (L) 1.2 Engine Oil 2-Stroke Fuel / Oil Ratio 40:1 The tool will be provided with 500Ml of pre mixed fuel wich will be enough to half of average clearance jobs. If more Fuel is reqired i can provide it for 3£ per litre or you can make it yourself but bear in mind that the fuel mix have to be done correctly or else the machine will stop working for good. The tool will be provided fully working and will have to be returned fully working, if not, you will be the responsable. This is a powerfull and delicate machine. Delivery within 10 miles available at extra cost.

Read more