I'm a CAA certified Drone operator with over 3 years experience flying drones for broadcast. My work has been featured on the BBC, ITV, Channel 4, Channel 5, Discovery, & National Geographic. 

Please get in touch for a full CV and paperwork, including specialist drone insurance provided by Cover Drone.

Some examples of my work can be seen here:   https://vimeo.com/184522690

My Kit Includes the Inspire 2 with the Zenmuse X5s Camera. I have licenses to record in ProRes and DNG Raw. I supply 750gb of Media, and a range of Olympus lenses. 

I also supply a monitor, a laptop for backup, a second controller to allow gimbal to be operated by someone else if desired, and a Mavic Pro drone as a backup. 

Note: price includes half a day of planning.  It is advised that we work together on this to maximise our mutual understanding of what can be achieved within CAA regulations. 

Please get in touch to discuss a project!

The latest Inspire drone from DJI, capable of recording up to 5.2K RAW, and compatible with DNG, ProRes, & H264/5 codecs. 

More info:
https://www.dji.com/inspire-2/info
http://www.dji.com/zenmuse-x5shttp://www.dji.com/zenmuse-x4s

Contact me for further information, able to supply with a variety of Lenses, up to 8 Batteries, 2 controllers, & up to 720gb of media. I can also supply a compatible Ipad mini and sun hood if required.  

I can also be hired as an Operator (Please see my other listings), as an experienced pilot with 3 years flying for broadcast. Clients include but are not limited to BBC, Discovery, Nation Geographic, & ITV. 


The Wally Dolly designed by cameraman for cameraman is a compact and lightweight track and dolly system that is quick and easy to set up and works with any tripod and camera combination.

The kit comes with a low-bowl adaptor for low angles  (100mm bowl compatible, able to provide 18s1 Sachtler  tripod head upon request for an extra £15 p/d)

Please see my other listings for a fully compatible tripod system. 

Miller 1505 Legs: https://www.millertripods.com/en/tripods/solo-100-3-stage-tripod-carbon-fibre.html

These are incredibly versatile, able to go as low as baby legs and higher than other larger 2 stage tripods, with a 100mm bowl capable of holding up to 30kg of weight. 

Sachtler 18 s1 Head: 

OVERVIEW
The S1 fluid heads are the latest models of the two legendary Sachtler Video 18 and Video 20 ENG / EFP series. Now with 6 steps more, the Video 18 S1 has a 16-step counterbalance and enables extremely fine tuning for the camera users. The fluid head now also has a Boost Button for a quick payload range shift and is therefore not only suitable for conventional usage in the ENG areas with digital and HDV camcorders, but also suitable for DSLR camera shooting HD videos with a film-like setup and appropriate accessories. Sachtler's well-proven Speedbalance technology enables quick and fine adjustment.

SUMMARY
Max Payload: 15-20kg
Tripod Head Type: Fluid Head
Type: Video
Weight: 2-5kg


Able to supply with Chrosziel  401-130 VCT quick lock plate for extra £5p/d. Please see other listings to book this separately. 

A really versatile shoulder rig which works very well with full sized cameras such as a Sony F5/55, Canon C300, Red Epic, Arri, but can also be modified to work with DSLR's to create a better shooting experience.

Vocas Universal Base plate: http://www.vocas.com/accessories/usbp-15-mkii

Vocas MB-256 Mattebox: 
http://www.vocas.com/products/mb-256

Shape quick lock handles: http://www.shapewlb.com/en/product/products/camera-supports-and-accessories/handles/camera-handle-grip/quick-handle-rod-bloc_33.aspx?id_page_parent=111

Also includes a Lens support bracket. 

Please contact me about individual component hire and see my other listing for a great compatible tripod and Chrosziel 401-130 VCT plate. 

Meet Bilbo.. my trusty friend and remarkably useful filming companion! 

As a basic camera mount the Cinesaddle is far more versatile than the tripod. It is lighter, smaller, offers greater stability and it will never pinch your fingers.
No fluid head is needed; the Cinesaddle grips the camera tightly, keeping it rock steady while you make any shot. Panning and tilting is as easy as with a fluid head, only the technique is different. The Cinesaddle's small size lets you mount your camera in the most confined space. Only one cubic foot in size, the Cinesaddle's total weight is one and a half pounds. That's less than half the weight of a standard zoom lens!
For an eye level shot, mount your camera onto any stable object such as a piece of furniture, a prop or your camera case. This wondrous product encourages each individual camera operator to use their creative abilities to the utmost and get more...

With Front & Back caps & Lens Pouch. 

Please See my other listings for other lenses and for Full Nikon lens kit. 

Nikon - EF & Nikon - E mount adaptors available subject to availability and at extra cost. 

With UV Filter, Lens Hood, Front & Back caps & Lens Pouch. 

Please See my other listings for other lenses and for Full Nikon lens kit. 

Nikon - EF & Nikon - E mount adaptors available subject to availability and at extra cost. 

With Protective Case. 

Please See my other listings for other lenses and for Full Nikon lens kit. 

Kit Includes:

50mm F1.4
14-24mm F2.8
24-70mm F2.8
70-200mm VR-S ii F2.8
2x Telephoto TC20-iiiE adaptor
Metabones Nikon F/G - Sony E mount Adaptor
MTF Nikon F/G - Canon EF mount Adaptor

With Front & Back caps & Lens Pouches. 

Can Provide a Protective bag for full kit if you don't have your own, this is a Doggy Bag AC's floorbag. 


dd professional monitoring and high-quality recording to virtually any camera with the Blackmagic Video Assist 4K. It features a 7" 1920 x 1200 display to help you frame and focus your shots, and provides 6G-SDI and HDMI inputs for recording the video output from professional and consumer cameras. The Video Assist records 10-bit 4:2:2 video up to UHD 4K at 30p to high-speed UHS-II SDHC/XC memory cards using industry-standard Apple ProRes and Avid DNx codecs. A touchscreen interface allows you to adjust settings and access monitoring features such as histogram, zebra, focus peaking, audio meters, timecode display, and more. To power the monitor, a 110-240V AC power adapter is included. It also has dual battery slots on the rear that power the monitor using Canon LP-E6 type batteries.

Kit comes with 6x LP-E6 type batteries + Charger
Mains Cable
3metre HDMI Cable
Small & Long BnC Cable
Handle
Protective Case

SD cards not supplied. 

https://www.bhphotovideo.com/c/product/1247829-REG/blackmagic_design_hyperd_avidas74k_video_assist_4k.html


https://www.dji.com/mavic

Kit comes as pictured but with 2x 64gb micro sd cards, & ND Filter. 

Please see my other listings for bigger drones and to hire me as an Operator. 

Zenmuse X5S for DJI Inspire 2 Drone

Comes with:

Olympus 9-18mm (+ Balancing kit & ND)
Olympus 45mm (+ Balancing kit & ND)
1 x 120gb DJI SSD
1 x 240gb DJI SSD
Card Reader

DJI's compact leightweight 3 axis gimbal system complete kit, with thumb control unit and PD movie thumb wheel follow focus for solo operation, and a second DJI Pan/Tilt/Roll remote for duel operation. 

Ronin M: https://www.dji.com/ronin-m

Thumb unit: https://www.dji.com/ronin-thumb-controller

PD movie live 2: https://www.pdmovie.co.uk/collections/remote-live-ii/products/pdmovie-pdl-f-remote-live-ii-thumb-wheel-controller-follow-focus-kit-single-channel?variant=26215573123

All comes in HPRC wheeled hard case. 

Tip: works well with somwe of my opther listings such as Blackmagic Monitor, A7S kit, Nikon Lenses and E mount (50, 25-70, 14-24 are all modified with 0.8 pitch focus teeth)


kit includes :

Ronin:
1 x Stand unit
1x Gimbal unit
1x Handle assembly (Bar with 2x grips)
1x Standard remote controller
1x Thumb remote controller and mount and rubber
1x High capacity battery
1x Battery charger and mains cable
1x Camera mounting plate
1x Lens support bracket and thumb screw
8x Assorted Camera fixing bolts
3x Assorted allan Keys
1x Storage pouch
2x large velcro straps
2x Small velcro cable tidies. 
2x HDMI cables (1x long, 1x short)

PD movie:
1x follow focus motor .8pitch
1x Thumb wheel controller
1x Motor cable
1xD-tap power cable
1x15mm mounting Bar (15cm) 
1x 15mm bar to 1/4" thread Male screw for attaching follow focus unit to standard DSLR cage or cheese plate(not included)
1x 15mm rails holder and long screw to attach to the front of ronin camera mounting plate.
1x instruction manual

Please get in touch if you have any questions. 





Introducing the second generation PDMOVIE REMOTE LIVE SINGLE CHANNEL. 

Using the latest brushless motor technology and the simple yet effective hand wheel system. It can be operated with just one hand so ideal for applications such as Handheld, Tripod, and Gimbals. This single channel version uses a large finger wheel attached to the universal clamp. 

- FASTER AND MORE POWERFUL 
The new motor system uses brushless motors which increases the torque and precision. The motor can drive regular stills lenses and much tougher cine lenses. The older Remote Live only had 500DPI resolution, this has been great increased to 7200DPI so it becomes more responsive and accurate than ever before. 

- SMALLER AND LIGHTER 
The previous REMOTE LIVE used an internal battery which added size and weight. The new system removes the battery and the motor and finger wheel controller are both powered by a Single D-Tap connector. 

- ADVANCED FUNCTIONS
There are 3 different speed modes to suit most operators needs, The A-B mode is useful for manually setting hard stops, this is great for stills lenses that keep spinning, or for specific focus points that need to be hit exactly. 

- CLAMP ANYWHERE 
The universal clamp can attach to a wide range of applications, perfect for 15mm or 19mm bars, camera handles, gimbal cross bars or tripod arms.


Specifications:

Packing Size: 16x16x5 cm
Weight:
- Motor: 0.22kg
- Controller: 0.1kg


Package Contents:

1x SC Fingerwheel Controller
1x Standard Motor(PD3-SM)
1x Motor cable(6 pin)
1x D-Tap Power Cable(6 pin)
1x 15/19mm Adapter ring

http://www.cinevate.com/dev/horizen/

An incredibly sturdy and fast to setup slider which I use with my fully built up F5 package. 

100mm bowl tripod head goes straight onto the slider cart and a flywheel and magnetic fluid drag systems allows for silky smooth slides. 

Comes with all terrain legs for low level use, as well as a 100mm bowl to either attach the slider to a 100mm bowel tripod, or can be used to convert the 100mm bowl on the slider cart to a standard 3/8" thread which will screw directly onto most camera bases.

If i need higher shots I use it with my Miller tripod, Sachtler s18 head, and either a stand, stills tripod, or monopod. Please see my other listings for these. 

Dual operated (where necessary) we use one of our two DJI Inspires to film events all over the UK. All our operators are fully licensed to fly professionally and are CAA approved.

Cloudcam UAV Ltd provides a national aerial video, photography and survey service. With our state of the art drones we are able to provide high quality 4k video in various formats as well as high definition still images. Our drone systems are also able to capture cloud burst data enabling ground and structural mapping which can be provided as 3D files for use in design and measuring packages.

Should you require drone footage for your next project or event, please get in touch. Several of our drone operators are also camera operators and are able to film with regular cameras as well as the drones to create your next corporate or promotional film.  

Hire a CAA approved drone pilot with the Inspire 2 and X7 camera & prime lenses, ProRes and Raw.                                                              Cendence Controller and Crystal Sky monitor.                                                                           www.flyhighimaging.com for profile

CAA Approved (PfCO) drone operator based in London but can travel across UK and worldwide. Carnet available for international travel.

DJI Inspire 2 - X5S with 15mm Lens (more lenses available upon request)

Crystal Sky 7.85" Monitor

4x TB50 batteries (more available upon request)

Pro Res - +£150 per day
DNG RAW - +£200 per day

Can also source X7 and other accessories

PfCO operator starting at £200 for a simple roof inspection or real estate photography and up. 

- 1x CAA-Certified Drone Operator (dual operators available, if required)
- 1x DJI Inspire 2
- 2x DJI Inspire Remote Controllers
- 1x DJI CineSSD 480GB with CinemaDNG RAW & AppleProRes licences (capable of 6K and 5.2K respectively)
- 1x CrystalSky 7.85" Ultra Brightness Monitor
- 1x CrystalSky 7.85" High Brightness Monitor
- 2x CrystalSky mounts for Inspire Controllers
- 6x TB50 batteries (approx. 1 hour flight time)
- 1x Set of 3x PolarPro Quartzline Polarised ND Filters (ND4/PL, ND8/PL, ND16/PL)
- 1x Set of DJI ND Filters (ND4, ND8, ND16, ND32, ND64, ND128)
- 1x Hard Case with wheels (custom mould for Mavic 2)
- 1x spare set of propellers
- 1x Landing Pad
- All cables and chargers incl. car charger

I'm VAT registered (no. 343686282), so I can provide a VAT receipt on request. All prices of my listings include VAT at 20%.

Professional, experienced CAA licensed (PfCO 4298)  insured pilot with fully loaded DJI Inspire 2 kit. 

We’ve done films, small productions and a range of company promotional gigs.  We’ll plan your shoot properly to get the best results without compromising on safety. 

Find our showreel here: http://alturl.com/8txca

Our kit includes an X7 camera equipped with Cinema DNG and ProRes licenses.  We bring a range of Micro Four Thirds prime lenses from ultra wide-angle to telephoto (7.5, 12, 15, 25, 45mm)  for any style of filming you need.  

We bring enough batteries and  SSD storage to record all day without prolonged pit-stops - something that few operators can claim to do.

Footage transfer included.  We also have access to an independent camera operator and professional editor for grading, music titles and so on in cases where you need a turnkey production service. 


I am available for hire by the part day  pricing from £ 125 for one hour on site up to £ 400 for one day this not include any extra travel time ( I am in Surrey )
I hold a current Civil aviation PFCO with 5m liability insurance
I have two Dji Inspire  drones  and can either take photographs or video,I can send you a sample video if required

I am available for hire by the part day  pricing from £ 125 for one hour on site this not include any extra travel time ( I am in Surrey )
I hold a current Civil aviation authority PFCO with 5m liability insurance
I have Dji Phantom 4 pro and Mavic air 2 drones ,you can see my work on arialimaging.com

Drone Operator & Inspire 2 and Zenmuse X5s 5k Kit

Description

Location

Item lent by Oli

Other items from Oli

FAQs

Drone Operator & Inspire 2 and Zenmuse X5s 5k Kit

Explore other options around London