Laser ES-800RGB Ex Display Unit with 12 months warranty.




Output power: 600mW minimum / 800mW maximum


Power red: &gt;110mW/655 red


Power green: &gt;40mW/532 green


Power blue: &gt;450mW/445nm blue


Laser: air cooled DPSS laser (green), diode (red, blue)


Laser class: 4


Control mode: auto, music, DMX


DMX channels: 12


Scanner: high-speed stepping motors, 3-8kpps


Scan angle: +/-30&deg; max.


Beam: ca. 3mm/2mrad


Basic patterns: more than 50 (layers, grids, tunnels etc.) and effects


Accessories: power cable, manual, interlock connector, key


Power supply: 85V - 250V AC


Power consumption: 40w


Dimensions: 230 x 270 x 160mm (L x W x H)


Weight: 4.5 Kg





Pioneer CDJ-850K
&nbsp;





The Pioneer CDJ-850K is a CD/MP3/USB Player &amp; Controller all in one and is used as a base for Pioneer&rsquo;s future generation of the CDJ professional series. The CDJ-850 acquires many features found within the industry standard pro-series with the addition of improved mixing features, outstanding audio quality and a new platform for music to be shared.&nbsp; The controller allows all levels of DJs to produce, play and perform their mixes with ease and lets creativity begin.





CDJ-850-K Official Introduction















Pioneer DJM-350 DJ Mixer




The&nbsp;Pioneer DJM-350&nbsp;mixer is part of the renowned Pioneer DJM series of mixers well known and used within the industry.


The mixer come complete with four types of effects (Filter, Jet, Crush and Gate), converts analogue to digital sound, each channel has an isolator equalizer and peak level meters and the mixer is able to record straight to a USB storage device.





DJM-350 Video Walkthrough















Pioneer CDJ-850K
&nbsp;





The Pioneer CDJ-850 is a CD/MP3/USB Player &amp; Controller all in one and is used as a base for Pioneer&rsquo;s future generation of the CDJ professional series. The CDJ-850 acquires many features found within the industry standard pro-series with the addition of improved mixing features, outstanding audio quality and a new platform for music to be shared.&nbsp; The controller allows all levels of DJs to produce, play and perform their mixes with ease and lets creativity begin.





CDJ-850-K Official Introduction














&nbsp;

Pioneer DJM900NXS2 DJ Mixer




Pioneer&nbsp;
DJM-900NXS2 Professional DJ Mixer follows in the path of its predecessor the DJM-900 nexus with improved FX and new top-quality audio parts.&nbsp; Incorporated within the robust casing, the mixer has been fitted with a pioneering 64-bit mixing processor, enabling the sound to be more innate and meticulous.&nbsp; In addition to this there is also a quality 24-bit/96kHz soundcard, direct digital connection and improved analogue input.





DJM-900NXS2 Official Introduction















Pioneer CDJ-850K
&nbsp;





The Pioneer CDJ-850K is a CD/MP3/USB Player &amp; Controller all in one and is used as a base for Pioneer&rsquo;s future generation of the CDJ professional series. The CDJ-850 acquires many features found within the industry standard pro-series with the addition of improved mixing features, outstanding audio quality and a new platform for music to be shared.&nbsp; The controller allows all levels of DJs to produce, play and perform their mixes with ease and lets creativity begin.





CDJ-850-K Official Introduction















Pioneer DJM-850K DJ Mixer




The Pioneer DJM-850 is a mixer and controller in one and crammed with a DJs most popular features.&nbsp; The mixer is available in two colours (black or silver) and has over 100 effect combinations allowing a DJs creativity to know no bounds.&nbsp; The mixer continues to feature its ancestors top features, the quality build of the club-standard DJM-900 nexus with the addition of a few new features all at an affordable price.





DJM-850K Official Introduction















The CDJ-350 will allow users to create DJ performances with various digital music files including MP3, AAC, WAV and AIFF files that are stored on different forms of media, including USB mass storage device class products or CD-R/RW discs. The media player also includes Pioneer’s proprietary music management software, rekordbox™, making it possible to manage music files on a computer for quick song selection when played back on compatible Pioneer players.

The DJM-850 is the perfect choice at this price point because it retains its predecessor`s most popular features, inherits the high-end build of Pioneer`s club-standard DJM-900nexus, and adds a few innovative effects of its own.

The DJM-850`s Beat Colour Effect, an industry first, uses sidechaining to add another layer of control to Pioneer`s brilliantly simple Colour Effects. The Beat Effect `listens`; to the audio input of each channel and connects the changes in volume to other parameters, so DJs can flawlessly blend new sounds and effects into their mixes.

And the DJM-850`s integrated four-stereo-channel sound card makes set up incredibly simple, with connection to PCs and laptops requiring just one cable.

Variety of advanced effects including all new Beat Color FX

Built-in 24bit/96kHz high performance USB sound card

TRAKTOR SCRATCH 2 Certified

Top panel USB connector for DJ software



THIS IS A DIRECT REPLACEMENT CROSSFADER FOR THE TECHNICS SHDX1200 A MIXER

Also known as;

Technics SHDX1200 A

Technics SH-DX1200 A

Technics SHDX1200A

Technics SH-DX1200A

Technics SH DX 1200 A

Technics SH DX 1200A



Slappa 4 x CD 12 DJ Page

FEATURES:

Sized to fit perfectly in LP bags and cases

Fits SLAPPA AURA & PTAC Shoulder Bags

Patented d2 layered pockets for disc & cover storage

Holds 8-16 discs per page (depending on covers)

TECH SPEC:

Product Dimensions:

12.2 x 12.2

Product Weight:

1.25 lbs



HardBody Platinum PRO 40

The HardBody Platinum PRO is ideal for 20 discs and 20 covers or 40 discs (if covers are not stored). With its molded Duro-Shock xEVA shell, the case safely stores away your CDs from damage. Combined with a velvet lined interior and optional d2i Interlocking Pages featuring d2 Layered Pockets for both disc and cover, the HardBody Platinum PRO provides the ultimate combination of technology and style.

The HardBody Platinum PRO`s polypropylene windows on d2 pockets will not stick to or damage discs and all pockets are stitched (not cheaply sealed). In addition, soft, non-woven waffle panels keep discs completely protected from scratches. Finally, two industrial strength zippers with molded rubber zipper pullers mean your case will open and close with ease.

Each case ships with 2 spine labels for cataloging and a disc cleaning cloth.

Dimensions: 7(w) x 7(h) x 3(d) - standard, 7.09(w) x 7.09(h) x 3(d) - d2i

Weight: .99 lb - standard, 1 lb - d2i



Serato Scratch LIVE® users can now play and scratch tracks faster with this custom designed (in conjunction with DJ Choice) Keyboard Cover. Each button is color coded to take advantage of Scratch LIVE’s extensive keyboard shortcuts for both the left and right decks including control and alt key combinations. MAGMA Keyboard Covers also safeguard the keyboard of your MacBook®/MacBook Pro® or your PowerBook® from dirt, spills, wear and tear.

The covers are produced by the US manufacturer KBcovers and are made of durable, ultra-thin silicone and perfectly molded to fit the MacBook® or the MacBook Pro®/G4 PowerBook®. They will not slip or slide. In addition, the covers have a silky smooth feel so they are soft and comfortable to the touch and will not restrict typing. You can also read the regular letters and commands if you aren’t using SSL. They are hand washable and easy to keep clean.

Features:

    * Keyboard cover made of durable, soft and ultra-thin silicone

    * Custom designed colour coded buttons with SSL keyboard shortcuts (Set cue-points and loops, switch between Absolute, Relative, Internal Mode, load/edit tracks etc.)

    * Safeguards the keyboard from dirt, spills, wear and tear Made of durable, soft and ultra-thin silicone

    * Perfectly shaped to the keyboard of MacBook® and MacBook Pro®/PowerBook®

    * Washable and easy to keep clean

Fitting 12” pouch for the MAGMA Laptop-Stand. The interior is equipped with soft foam and an additional zip-pocket for srews and tools.



Earpad Set Wood is especially designed for the Sennheiser Headphones HD25, 

HD25-13, HD25 SP, HMD25, HME25 and HMEC25. The set includes 2 x Earpads and 2 x Headpads(self-adhesive) and can be mounted in a few seconds. The velour earpad sets, which are known by every DJ, are now available in an advanced material called Nicki. This high-quality material is very breathable and convinces through its high flexibility. The earpads are fluffy and ensure a soft and cuddly wearing comfort. 

The Earpad Set Teddy combines everything that a DJ wants – first-class quality and a cheap price! The set is available in many different colors, so you can leave a creative note on your headphone and you can give an old headphone a new look within seconds. With the Earpad Set Teddy you cann assure a perfect and great look of you professional Sennheiser DJ headphone.



Earpad Set Teddy is especially designed for the Sennheiser Headphones HD25, 

HD25-13, HD25 SP, HMD25, HME25 and HMEC25. The set includes 2 x Earpads and 2 x Headpads(self-adhesive) and can be mounted in a few seconds. The velour earpad sets, which are known by every DJ, are now available in an advanced material called Nicki. This high-quality material is very breathable and convinces through its high flexibility. The earpads are fluffy and ensure a soft and cuddly wearing comfort. 

The Earpad Set Teddy combines everything that a DJ wants – first-class quality and a cheap price! The set is available in many different colors, so you can leave a creative note on your headphone and you can give an old headphone a new look within seconds. With the Earpad Set Teddy you cann assure a perfect and great look of you professional Sennheiser DJ headphone.



Zomo HD 25 Replacement Ear Pads Cactus are suitable for Sennheiser HD25, HD25-13, HD25 SP, HMD25, HME25 und HMEC25. The set includes 2 x Earpads and 2 x Headpads(self-adhesive) and can be mounted in a few seconds. With this set you can leave a creative note on your headphones and you can give an old headphone a new look within seconds. 

Also you can save the stable value and the great look of your professional Sennheiser Dj headphones. Velour Earpads are very comfortable to wear even if it´s getting more hot and the normal earpads are full of sweat.



Earpad set of Velour comes in many trendy colours suitable for Sennheiser HD25, HD25-13, HD25 SP, HMD25, HME25 und HMEC25. The set includes 2 x Earpads and 2 x Headpads(self-adhesive) and can be mounted in a few seconds. With this set you can leave a creative note on your headphones and you can give an old headphone a new look within seconds. 

Also you can save the stable value and the great look of your professional Sennheiser Dj headphones. Velour Earpads are very comfortable to wear even if it´s getting more hot and the normal earpads are full of sweat.

Earpad set made of synthetic leather suitable for Sennheiser HD 25
, HD 25-13
, HD 25-SP
, HMD25
, HME25
 and HMEC25
. The set includes 2 x Earpads and 2 x Headpads(self-adhesive) and can be mounted in a few seconds.
 With this set you can give an old headphone a new look within seconds. Also you can save the stable value and the great look of your professional Sennheiser Dj headphones.
 
 Features:

 
 &bull; Material: PUE
 &bull; Colours: black
 &bull; Suitable for: Sennheiser HD 25, HD 25-13, HD 25-SP, HMD25, HME25 and HMEC25
 &bull; Weight: 18g


Official Sennheiser HD25 2.0m replacement cable with threaded 3.5mm plug.
 It is compatible with HD 25, HD 25-1, HD 25-1 II and HD 25-13. The cable lengths are asymmetrical and will not be suitable for HD 25-SP models, as the HD 25-SP cable is symmetrical.


First there were only coloured ear pad sets but then there finally came colored cables for the Sennheiser Headphone HD-25, too.This coloured headphone cable for the Sennheiser Headphone HD-25 is a real looker.The coiled cord in mint color is thicker than any other common headphone lead cord with which you gain not only technical but also optical advantages.


First there were only coloured ear pad sets but then there finally came coloured cables for the Sennheiser Headphone HD-25, too.This colored headphone cable for the Sennheiser Headphone HD-25 is a real looker.The coiled cord in mint color is thicker than any other common headphone lead cord with which you gain not only technical but also optical advantages.


First there were only coloured ear pad sets but then there finally came coloured cables for the Sennheiser Headphone HD-25, too.This colored headphone cable for the Sennheiser Headphone HD-25 is a real looker.The coiled cord in mint colour is thicker than any other common headphone lead cord with which you gain not only technical but also optical advantages.


The Agent headphone features hi-fidelity sound and a contour so sleek it`s virtually undetectable by enemy radar. Whether dictated by expedience or personal preference, sometimes youve got to keep a low profile and tread lightly. 

    * Speaker Diameter: 40mm

    * Magnet Type: NdFeB

    * Frequencyrange:18 -20K Hz

    * Impedance: 32 ohms

    * MaxInput Power: 30mw

    * CableType: Nylon Braided

    * CableLength: 1.2m

    * Plug Type:3.5mm Gold Plated

Skullcandy

Since we were established in early 2003, Skullcandy has been producing high-quality headphones worn by some of the world`s best action sport athletes. Skullcandy`s headphones are renowned for their durability, portability, and style?all important aspects in the eyes of Skullcandy`s customers. Headquartered in Park City, UT, a mecca to many outdoor enthusiasts, Skullcandy has quickly ascended to the top of the list of headphone manufacturers. Skullcandy has a diverse, constantly evolving line of headphones that meet the high demands of its customers all over the world?whether it`s a snowboarder sending it off a 20-foot cornice on a crisp, bluebird morning in the Wasatch Range or a DJ at the turntables in a crowded Ibiza nightclub in the wee hours of the AM. Whatever your needs be, Skullcandy`s headphones allow you to take your beats with you and look good while you do it. Skullcandy knows that your music is important to you?our headphone products make it easy to take it with you anywhere.

We not only make high quality headphones, but also mp3 players and a variety of other quality products with integrated audio systems. In addition, Skullcandy has also developed a special Link technology that allows you to operate your cell phone seamlessly with your Skullcandy headphones so you never miss a call while you are listening to your tunes. There is a good chance that you will be listening to your headphones for long periods of time so keep in mind that it is important that you consider what style will be most comfortable for you (for example, you might want your headphones to fit directly into your ears, go over your head, or go behind your neck so you your headphones don`t mess with your finely cropped hair). Rest assured, whatever your needs are in regards to headphones, Skullcandy has you covered. If you are in need of smaller headphones to get around with, check out our Full Metal Jackets, Smokin` Buds, or the brand new Holuas. If you are a DJ in need a set of the fattest bass headphones available, look no further than the SK Pro. With 50mm power drivers and 50mm speakers this headphone simply blows everything else away. If you are in need of hydration while you are bumping some beats on a bike ride, check out one of our stylish H20 packs. For true portability and fashion, consider any one of our wireless headphones, which include the Double Agent and Marc Frank Montoya`s signature line, the MFM Pro headphones. If you are in need of blocking out the racket around you, try one of our noise reducing headphones, such as the Ti. The Ti, and many of our headphones for that matter, has a sealed design that keeps noise from slipping out so you don`t have to worry about disturbing the lady next to you on your red eye flight across the country. With interchangeable ear pads and 40mm Titanium speakers, you can truly tune out while you tune in.

Skullcandy`s mission is to put out the most stylish, affordable and innovative headphones that can be easily integrated into your life. Our line of headphones is always expanding to meet the demands of our loyal customers.



You know you`ve made it when someone calls you an icon. It means you stand for something. It means you’re darn near irreplaceable. It means that when somebody looks at you, they know you’re the Best In Class, the Cat`s Meow, you`re Sick, you`re Dope. We’re getting off track. The Icon2 from Skullcandy is all of that... plus it is completely GRIMY.

    * 30mm speaker

    * in-line microphone (iPhone and Blackberry compatible)

    * Frequency range: 18 -20K Hz

    * Impedance: 32 ohms

    * Max Input Power:  30mW

    * Cable Type:  Nylon Braided

    * Cable Length:  1.2m

    * Plug Type:  3.5mm Gold Plated



This little cholo packs a monster 40mm power driver in a super small lowrider chassis. With smooth styling, 90-degree swivel DJ-style speakers, and a unique fold-up headband for ultra portability, the Skullcandy Lowrider will roll all over the competition.

FEATURES:

    * Speaker diameter - 40mm

    * Magnet - NdFeB

    * Frequency range 100 - 18,000 HZ

    * Impedance 32 ohms

    * Max input power 400 mW

    * Cable type OFC

    * Cable length 1.2 M

    * Plug type 3.5mm gold plated



This musical burn unit brags twin 40mm drivers, tangle-proof flat cables and a mixed-material composition sturdy enough to deal your beats and withstand opposing jerks, drops and hustle without breaking.

Features:

40mm Audio Drivers

Lightweight Ergonomic Fit

Tangle-Free

Specifications:

Driver Diameter: 40mm

Magnet Type: Neodymium

Frequency Response: 20 - 20K Hz

Impedance: 32 ohms

Max Input Power: 120mW

Cable Type: TPE Flat Cable

Cable Length: 1.3m

Plug Type: 3.5mm gold plated



Urbanz Block DJ Headphones (Blue/Black)

Build quality & additional features that include - Funky environmentally friendly packaging that becomes your free carry case holder with colour coded Carabiner, the case is dust proof and splash proof with belt loop. Headphones are foldable with 2 pairs of leather pads (different colours), Colour coded detachable Curly cable with 3.5mm screw in gold jack and 6.3mm gold adaptor also. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty

    * Light weight DJ design with foldable headphone convenience

    * Self adjusting leather head pads + additional Colour pair

    * Pure sound performance ideal for digital audio

    * Funky carry case with matching carabiner

    * 1 year warranty PLUS Register at www.urbanz.co.uk for FREE lifetime warranty

  



Lightweight fully flexible DJ style headphones. Build quality & additional features that include - Funky environmentally friendly packaging that becomes your free carry case holder with colour coded Carabiner, the case is dust proof and splash proof with belt loop. Headphones are foldable with leather pads, Colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * Light weight DJ design with foldable headphone convenience

    * Self adjusting leather head pads

    * Pure sound performance ideal for digital audio

    * Funky carry case with matching carabiner

    * 1 year warranty PLUS Register at www.urbanz.co.uk for FREE lifetime warranty



Solid Headphones (Silver)

Lightweight fully flexible DJ style headphones. Build quality & additional features that include - Funky environmentally friendly packaging that becomes your free carry case holder with colour coded Carabiner, the case is dust proof and splash proof with belt loop. Headphones are foldable with leather pads, Colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * Light weight DJ design with foldable headphone convenience

    * Self adjusting leather head pads

    * Pure sound performance ideal for digital audio

    * Funky carry case with matching carabiner

    * 1 year warranty PLUS Register at www.urbanz.co.uk for FREE lifetime warranty

Vibe Headphones (Blue)

Build quality & additional features that include - Volume control - super bass - light weight comfort fit and colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * Light weight with Comfort Fit

    * Pure sound performance with Volume Control

    * Ideal for digital audio - super bass

    * 1 year warranty PLUS Register at www.urbanz.co.uk for FREE lifetime warranty

Vibe Headphones (Pink)

Build quality & additional features that include - Volume control - super bass - light weight comfort fit and colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * Light weight with Comfort Fit

    * Pure sound performance with Volume Control

    * Ideal for digital audio - super bass

    * 1 year warranty PLUS Register at www.urbanz.co.uk for FREE lifetime warranty

Wild Headphones (Blue/Yellow)

Lightweight fully flexible DJ style headphones. Additional features that include - Funky environmentally friendly packaging that becomes your free carry case holder with colour coded Carabiner, the case is dust proof and splash proof with belt loop. Headphones are foldable with leather pads, Colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * Lightweight, fully flexible, DJ style

Wild Headphones (Green/Orange)

Lightweight fully flexible DJ style headphones. Additional features that include - Funky environmentally friendly packaging that becomes your free carry case holder with colour coded Carabiner, the case is dust proof and splash proof with belt loop. Headphones are foldable with leather pads, Colour coded cable with 3.5mm gold jack. 1 year warranty with your purchase PLUS Register at www.urbanz.co.uk for FREE lifetime warranty.

    * FREE delivery within the UK!





FEATURES:

*Laser power: 150mW red, 50mW green, 120mW blue

*Laser wavelength: 650nm red, 532nm green, 450nm blue

*Laser source: red - diode, green - DPSS, blue - diode

*Scanning system: 15Kpps scanner system

*Scanning angle: ±20 degrees

*Full DMX512 operation

*17 DMX channels

*Auto mode

*80 built-in patterns using 7 different colours

*Sound-to-Light via a built-in microphone

*Variable mic sensitivity

*Master/Slave mode

*Full wireless remote control

*Fan cooled operation

*LED display

*Tough aluminium chassis

*Adjustable hanging bracket

*Safety chain loop

*On/Off switch

*Key switch

*Mains fused IEC in

*Fuse rating: 20mm, 1A slow blow

*Rated voltage: AC100V-240V/50Hz-60Hz

*Power consumption: 15w

*Leads supplied: UK / Euro IEC

*Class 3B laser

*Dimensions (WxHxD): 190 x 160 x 170mm

*Weight: 1.6Kg



Holographic Laser Star Projector

Features:

  *Dynamic Liquid Sky

  *Animated Moving Starts

  *Cloud Formation

  *Fully Adjustable Motion Speed

  *Sound Active & Auto-mode

This laser is a compact DJ laser lighting effect. The Kool Light Galaxy 110 RG is the perfect portable cluster style laser. Bright red and green beams create an attractive spread of light across the floor or wall.Features: *80mW Red and 30mW Green Laser *Compact cluster laser *Ideal for Mobile DJ Use *Sound Activated Programs *also has Automatic Programs *Built In Microphone *Tripod Stand for easy positioning *Includes remote control *Speed Control *Strobe function


The Laserworld ES-600B is a high-performance laser lighting effect guaranteed to add a unique dynamic to any live music performance or DJ set. The blue geode is a robust and sturdy build, ideal for any high-pressure environment.




Laserworld ES-600B















Now Discontinued.
 
Please click HERE

 

to view the lastest Laserworld Lasers.



Diodes: air-cooled DPSS diode laser with min. 50mW, max 100mW / 532nm green

Laser class: 3b

Control modes: DMX 512, automatic and sound control

DMX channels: 8

Scanner system: fast stepping motors, 3-8kpps

Basic patterns: 50 (layers, tunnels, fences, waves, etc.)

Accessories: power cable and manual

Power supply: 85V - 250V AC

Power consumption: 40w

Dimensions: 230mm x 160mm x 160mm (L x W x H)

Weight: 3Kg

This first-of-a-kind laser creates amazing 3D patterns. The colour-changing beam, along with the pattern effects, are best viewed when projected onto a flat surface. Adding smoke or haze will further enhance the impressive effects, making it ideal for mobile DJs and venue installation. This laser is the perfect addition to any light set-up.

    Unique 3D patterns

    0.5W total laser power (Red: 150mW, Green 50mW, Blue: 300mW)

    Auto, sound to light, pattern select and 10 channel DMX modes

    Master/slave mode

    Easy digital display to set the mode of operation

    Key controlled for laser safety

    We recommend that this product is used within the guidelines HSG95

Power 	                240Vac, 50Hz

Power consumption 	45W

Fuse rating 	        F2A

Red laser power 	150mW 650nm

Blue laser power 	300mW 405nm

Green laser power 	50mW 532nm

Laser class 	        3B

DMX channels 	        10

Dimensions 	        200 x 240 x 70mm

Weight 	                2.4kg

Laser & LED safety standard 	BSEN60825-1 2007

This spectacular effect combines red, green and blue lasers to create an amazing 7 colour display. It can be operated in standalone, auto, sound to light, and 9 channel DMX modes. With a combined power of 0.5W this laser is one of the brightest in its class, making it suitable for mobile DJs through to venue installers.

FEATURES:

    *128 stepper motor laser patterns

    *0.5W total laser power (Red: 150mW, Green 50mW, Blue: 300mW)

    *3 colour operating modes (7 colour, RGY or white)

    *Auto, sound to light and 9 channel DMX modes

    *Master/slave mode

    *Easy digital display to set the mode of operation

    *Key controlled for laser safety

    *We recommend that this product is used within the guidelines HSG95



*Power 	230Vac, 50Hz

*Power consumption 	41W

*Fuse rating 	F2A

*Red laser power 	150mW 650nm

*Green laser power 	50mW 532nm

*Blue laser power 	300mW 455nm

*Laser class 	3B

*DMX channels 	9

*Dimensions 	200 x 240 x 70mm

*Weight 	2.5kg

*Laser & LED safety standard 	BSEN60825-1 200



Perfecting, your perfect take

Fast delivery to the USA, UK, Europe and the rest of world. Getting that perfect take is always hard, but don`t you just hate it, when you`ve set up everything correctly, recorded the perfect take, then listened back to hear your vocal volume has peaked, distorted or there are two many SSS or dooph sounds!?! Ahhhh!

Well the Editors Keys Dual Layer pop filter can make every single recording perfect. We know every person has a different voice and people speak at different levels. This is why your pop filter has a dual layer of high quality nylon mesh, which gives you adjustable levels of audio filtration. That makes your Editors Keys Pop filter 2X more effective than that of the nearest rival single filter.

From a survery of 200 audio producers, 187 agreed that a dual layer pop filter is the most effective way of improving audio recordings and preventing pops and hisses.

What does a pop filter do?

A pop filter, (sometimes called a pop shield) creates an anti-pop noise protection for all audio recordings. Recording studios all over the world use our pop filters as they are an essential tool when recording. They serve to reduce and eliminate `popping` sounds caused by fast moving air whilst you speak or sing.

If you`ve recorded yourself singing or speaking before, you will sometimes notice when you pronounce words with P`s, B`s, S`s, Ch`s or Z`s it caused your microphone to record a muffled or pop vocal. Using your Editors Keys Dual Layer Pop Shield will completely take these out of your recordings.

Recording, without the complications

Your Dual Layer pop filter is really easy to attach to any microphone stand. Simply unscrew the clamp and tighten it onto your microphone stand, easy! The flexible arm allows your to accurately adjust the distance between the filter and the microphone for optimal performance.

    Perfect for singing, voice overs or podcasts

    Fully adjustable arm for precision adjustment

    Dual Layer Pop Filter, 2X as effective as a standard pop filter



Currently Out Of Stock.
 

Click HERE



 to view our latest wireless microphone range.


The Kam KWM11 Dual VHF wireless microphone system is perfect for Mobile DJs, Fitness Instructors, Schools, Live Events, Karaoke and much more! The kwm11's wireless mics are exceptionally reliable, sound fantastic and come with a three-year warranty!





Kam KWM 11 Video
&nbsp;













KWM11 dual VHF system is extremely durable, has two balanced individual outputs and a combined 1/4" jack output. The single channel A + B rotary level controls allow for smooth vocal adjustments, and the receiver is programmed to find the cleanest signal at all times.


Kam's kwm11 comes with 1 x free battery for the wireless microphone and the lead to connect to the receiver.



Kam VHF Body Pack V2 Versatile VHF belt pack system that can be used for headset or lavalier mics or is internally switchable to guitar/instrument level input.

PLEASE CALL FOR FREQUENCY

ITRANS V1

Wireless microphone

VHF

On/off switch

Input level control

6.3mm (1/4) jack output connector

battery powered transmitter

cardioid response pattern

Suitable for Mobile DJs, performers, pub quiz etc

Signal LED indicator

Power on LED indicator

Narrowband filters to prevent signal interference

Weight: 1.1kg (including packaging)

The iTrans-V3 set is a superior quality VHF microphone with a true diversity receiver.  This gives improved performance and keeps drop outs in the RF link to a minimal. The iTrans-V3 set uses SMT technology producing a durable and reliable unit. The set includes handheld, bodypack, headset and lavalier. The iTrans-V3 set is suitable for Dj’s, performers, stage and conference. 

Description : The iTrans-V3 set is a superior quality VHF microphone with a true diversity receiver.  This gives improved performance and keeps drop outs in the RF link to a minimal. The iTrans-V3 set uses SMT technology producing a durable and reliable unit. The set includes handheld, bodypack, headset and lavalier. The iTrans-V3 set is suitable for Dj’s, performers, stage and conference. 

Features : 

*Microprocessor controlled

*VHF wireless microphone

*True diversity receiver

*In-built special voice compressor-limiter

*Dynamic cardioid direct cartridge

*Receiver signal status LED

*Individual channel controls

*Balanced XLR outputs

*Combined unbalanced 6.3mm (1/4”) jack output



VHF WIRELESS TRANSMITTER WITH HEADSET MICROPHONE

A bodypack transmitter with headset microphone offering excellent sound quality and reliability. Ideal for speech applications and aerobic instructors.

    * Body pack transmitter with dynamic headband microphone

    * Available in frequencies 173.8MHz and 175.0MHz

    * Operating range of 30m (line of sight)

    * Lightweight headset with flexible boom

    * Suitable for use with radio microphone models 171.304/305/310/31

       /316/317UK



Numark Stereo IO Audio Interface is a connection box that turns analogue audio into a digital signal. Stereo iO has RCA connections for use with practically any audio equipment from DJ controllers, mixers to turntables, its other end has a USB connector for your Mac or PC computer. You can connect any line or phono-level divice to your computer for recording, mixing or processing. Or you can also use Stereo|iO as an output cable from your computer to inputs on an analog mixer, enabling you to mix MP3s and other music from a computer in your standard DJ mixer.


Stereo io soundcard is a cheap, problem-solving tool that can be priceless for DJs and musicians at a gig or in the studio when you need to make a connection. The class-compliant USB device works plug and play for Mac and PC, requiring no software-driver installation or external power for operation.



Traktor Audio 2 mk2 is an ultra-portable audio interface made especially for DJs. Don&rsquo;t let the size of the interface put you off; it&rsquo;s small enough to fit in your pocket, but it packs a punch big enough to make the room shake. The Native Instruments Audio 2 &nbsp;allows you to beat match your next track in fantastic 24-bit/48kHz quality.


The Traktor Audio 2 interface gives you plug and play ability with Traktor Pro 2 DJ software meaning it&rsquo;s the perfect addition to any existing setup. Audio 2 works by splitting two Traktor decks into separate audio channels for making pre-listening and beat matching with headphones easier.&nbsp;


The seamless integration with iPad and iPhone means you can turn either iOS device into a fully functional, club ready setup with ease. While using your iPad or iPhone, the Traktor Audio 2 actually boosts the output volume and an additional power supply means you can charge your iOS device for hours upon hours of non-stop mixing. 


Traktor Audio 2 comes with Traktor LE, (an introductory version of Traktor Pro 2). However, the Audio 2 includes an e-voucher for money off Traktor Pro 2 Software for when you&rsquo;re ready to step up your game.



The Alto APX1000 power amplifier delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power to weight ratio and performance quality of the APX 1000 means you`ll get solid Class D power without breaking your back or your wallet.

The Alto SX115 has a 15 Low Driver and 1 neodymium HF Driver. Made from thick thick Baltic Birch and covered in a ruggedized black textured duracoat finish that is scratch and dent resistant.

Recessed handles make the TOURMAX SX115 easy and safe to move, whlile heavy-duty rubber feet ensure that it stays put no matter how much volume you pump through it. 

Continuous Power: 300W

Program Power: 600W

Peak Power: 1200W

Max SPL at 1m: 122 dB Program / 124.5 dB Peak

Looking for a great live mixer? The ZEPHYR ZMX124FXU is a 12-channel, 4-bus mixer with more than enough inputs, outputs, routing, EQ, and effects, for any live performance reinforcement need.

It features 6 ultra-low microphone inputs with balanced TRS jacks and instert points, a three-band EQ with a sweepable mid frequency on 4 channels, four channels of stereo inputs with 4-band fixed EQs, and a 4-bus assignable sub mixer. You also get 60mm high-precision faders and four AUX sends per channel (2 Pre/Post switchable pots). The ZEPHYR ZMX124FXU gives you the all the features you need to mix any professional live performance.

Features:

    20 total inputs 

    3-band EQ with swept mid on microphone channels 

    4-band fixed EQ on stereo line channels 

     Stereo 9-band graphic EQ 

    4 AUX sends per channel: 2 PRE/POST faders switchable 

    4-bus sub mixer 

    60mm high precision faders 

    24-bit DSP effects for 256 choices (16 presets × 16 variations) 

    USB audio interface for computer software recording and monitoring 

The Alto SX 112 has a lightweight 15mm Birch Plywood cabinet and Recessed handles easy and safe transportation.

Alto SX112 Main Features:

    Continuous Power: 200W

    Program Power: 400W

    Peak Power: 800W

    Max SPL at 1m: 119 dB Program / 122 dB Peak

Alto TMX 120DFX is a powered mixing deck which is jam packed with inputs and effects! But also with a huge amp built in! This is perfect for people who are looking for a mixer with alot of mic inputs and alot of other inputs

12 channel powered analogue mixing desk

500 watts per channel @ 4 ohms

300 watts per channel @ 8 ohms

22 inputs

8 x balanced xlr mic inputs

12 x 6.3mm jack line inputs

Rca phono tape input/output

Gain, efx, monitor & 3 band sweepable eq per channel

7 band graphic equialiser

6.3mm jack monitor output

6.3mm jack send/return

Speakon outputs

On-board digital effects processor

Phantom power

AUX cue allows channels to be independently monitored in stereo

Master AUX section with EFX to Monitor

High-volume headphone output



Package contains 

2 x Technics SL1200 MK2, 2nd hand

1x Numark M101 ,  

Headphones and Leads

NOT IN STOCK 

1210SL MK5 (Pair) 2ND HAND + NUMARK M101 

Package Includes Technics 1210SL MK5 And Kam KSP50 Mixer. Includes Headphones Cables And Carts not  Included.

Pictures are for illustration purposes, decks do not have carts and normally no lids. As they are 2nd hand

Package contains;

2 x Technics SL1200 Mk2 (SL 1200 Mk5) 2nd hand

1 x Allen and Heath Xone:02 (X One 02)

Free Headphones and Leads included

Package contains;

2 x Technics SL1200 Mk5 (SL 1200 Mk5) 2ND HAND

1 x Allen and Heath Xone:32 (X One 32)

Free Headphones and Leads included

Package contains;

2 x Technics SL1200 Mk5 (SL 1200 Mk2) 2nd hand

1 x Allen and Heath Xone:92 (X One 92)

Free Headphones and Leads included

Package contains;

2 x Technics SL1200 Mk5 (SL 1200 Mk5) 2nd hand

1 x Numark M1 USB (M1 USB)

Free Headphones and Leads included

Package contains;

2 x Technics SL1200 Mk5 (SL 1200 Mk5) 2nd hand

1 x Numark M2 (M2)

Free Headphones and Leads included

Package contains


2 x Technics SL1210 Mk2 (SL 1210 Mk2) 2nd hand


1 x Allen and Heath Xone:32 (X One 32)


Free Headphones and Leads included. Pictures are for illustration purposes, decks do not have carts and lids.&nbsp;The Technics SL1210 Mk2 Turtables are now discontinued, to see others in the range please&nbsp;click here.





Package contains


2 x Technics SL1210 Mk2 (SL 1210 Mk2) 2ND HAND


1 x Allen and Heath Xone:92 (X One 92)


Free Headphones and Leads included. Pictures are for illustration purposes, decks do not have carts and lids. The Technics SL1210 Mk2 Turtables are now discontinued, to see others in the range please click here.





Package contains


 2 x Technics SL1210 Mk2 (SL 1210 Mk2) 2nd hand


1 x Numark M2 (M2).


Free Headphones and Leads included. Cart and styli not included. Pictures are for illustration purposes only, decks do not come with lids. The Technics SL1210 Mk2 Turntables are now discontinued, to view others in the range please click here

.



Original Technics replacement part

Used to balance the tonearm. Mounts (screws) onto the back of the tonearm.

Replacement balance weight for SL1200 & SL1210MK2 turntables

Original Technics replacement part

Replacement tone arm for SL1210MK2 direct drive turntable.

NOW DISCONTINUED REPLACED BY TRANSACTIVE WIRELESS

TransActive Mobile is the perfect PA system for outdoor parties, mobile musicians, business meetings and sporting events. A built-in retractable handle and flight-case style roller wheels allow this PA to travel with you wherever you go.

Simply attach your CD player, musical instruments or the included microphone and you`re ready to rock. The integrated Universal Dock for iPod lets you quickly and easily dock your iPod right in the top, for fast control and playlist changes.

A long-lasting rechargeable battery, a high-efficiency amplifier with four inputs, sturdy aluminum construction and portable design, ensures the TransActive Mobile can be taken anywhere and everywhere.

Perfect for outdoor parties, live gigs, business meetings, sporting events, and tailgate parties.

KEY FEATURES:

    * High-output powered mountable 2-way speaker system

    * Built-in rechargeable battery with level indicator lasts over 12 hours

    * Outputs high-fidelity sound to over 150 feet

    * Enhanced bass output creates a full, rich sound

    * Professional quality microphone included

    * Heavy-duty aluminum construction

    * Two-wheel system with retractable handle for easy portability

    * 1-3/8 PA speaker stand mountable

SPECS:

Dimensions: 15 W x 18.5 H x 11 D

Weight: 33.8 lbs.

Alesis Transactive Wireless&nbsp;


The all-in-one TransActive Wireless is a complete, active PA system designed for on-the-go use. Pull up the telescoping handle, tilt the amp onto the recessed wheels, and take your TransActive Wireless with you wherever you go. Once you&rsquo;re there, simple single-button pairing allows you to instantly stream audio from any Bluetooth device.



 VERSATILE INPUTS



In addition to Bluetooth streaming, the TransActive Wireless offers a variety of inputs to accommodate almost any source&mdash;microphone, guitar, keyboard, computer, drum machine, CD or MP3 player&mdash;whatever you need. Use the TransActive Wireless to perform, to play music, or to make your voice heard.



 AMPLIFIER AND SPEAKER SYSTEM
 



TransActive Wireless is equipped with a built-in amplifier offering plenty of power, low distortion and high efficiency. The large driver delivers a solid low end and powerful, crisp highs.  



 BATTERY OR WALL POWERED



The convenient built-in rechargeable battery delivers up to 50 hours of cordless amplification. You can also plug your TransActive Wireless in to an AC outlet for unlimited performance time. So take the TransActive Wireless with you wherever you need to go. You'll spend less time setting up, and more time enjoying your music.



Specifications:

- 500W Program Power

- High-Powered Bi-Amped Speaker System with 15-inch woofer & 1.3-inch driver

- Built-in Class “D” Lightweight High Power Amplifier (2)

- Rotatable Horn (Dispersion 90* x 40*)

- XLR and 1/4” input

- 3-Band EQ (Hi: 10KHz±10dB, Low: 50Hz±15dB, MId: 2.5KHz±12dB)

- 80Hz Low Cut Filter

- Constant Velocity Fan

- 6-Way Component Protection Design

- 14 Fly Points (M10)

- Stand Mountable

- XLR Output

- Front Clip indicator LED

- Frequency Response 20Hz-20Khz

- Crossover @ 2.1kHz

- Nominal Dispersion 90* x 60*

- Dimensions (LxWxH): 445x422x730mm

- Weight: 27kg.

(PRICE EACH)

Specifications:

- 500W Program Power

- High-Powered Bi-Amped Speaker System with 15-inch woofer & 1.3-inch driver

- Built-in Class “D” Lightweight High Power Amplifier (2)

- Rotatable Horn (Dispersion 90* x 40*)

- XLR and 1/4” input

- 3-Band EQ (Hi: 10KHz±10dB, Low: 50Hz±15dB, MId: 2.5KHz±12dB)

- 80Hz Low Cut Filter

- Constant Velocity Fan

- 6-Way Component Protection Design

- 14 Fly Points (M10)

- Stand Mountable

- XLR Output

- Front Clip indicator LED

- Frequency Response 20Hz-20Khz

- Crossover @ 2.1kHz

- Nominal Dispersion 90* x 60*

- Dimensions (LxWxH): 445x422x730mm

- Weight: 27kg.

(PAIR PRICE)

This Cerwin-Vega CVP-118X is a subwoofer that boasts a high-performance 18 Cerwin-Vega woofer for extreme power handling and exceptional low-frequency response. The CVP-181X features a singular pole cap that can accommodate up to two top boxes for maximum configurability. Like its 21 big brother, the CVP-118X is a subwoofer designed to deliver high quality sound while being packaged in an enclosure the size of a standard 15 subwoofer.

The CVP-118X features Cerwin-Vega`s legendary driver design and bass performance. It is capable of handling massive amounts of power: 700 watts continuous and 1400 watts peak respectively. Cerwin-Vega`s CVP line of subwoofers feature enormous amounts of power handling in a compact design, resulting in one of the best values on the market.

FEATURES:

    * Connectors (input): (2) 1/4, Neutrik Speakon

    * Driver: 18 SW18C cast aluminum frame

    * Woofer Cone Material: Cellulose

    * Voice Coil: 3 aluminum wire with black aluminum former

    * Enclosure/Finish: 18mm multiply hardwood with Coolex paint and carpet

    * Grille: Heavy duty, cast aluminum that doubles as a driver heat sink

    * Line level/mic level switch

    * Multi positioning contour switch

    * Signal through output AC output

    * Handles: 2-side mounted, steel and aluminum

    * Feet: 4-rubber

    * Pole mount adaptor: 1-top (35mm)

TECH SPECH:

    * Type: Passive Single 18 Sub In compact cabinet

    * Active Power: 700W continuous, 1400W Peak

    * Frequency Response: 39Hz 135Hz

    * Frequency Range: 36Hz 135Hz (-10 dB)

    * Sensitivity: 100dB

    * Max SPL: 131dB

    * Dimensions (HxWxD): 25 x 21 x 23.5, 635 x 533 x 597 (mm)

    * Item Weight: 85 lb

    * Shipping weight: 95 lb

(PRICE EACH)

Much like its predecessors, the CVA-121 and CVA-118, the CVA-115 features Cerwin-Vega`s legendary driver design and bass performance, incorporated in a small compact footprint. The CVA115`s built-in amplifier provides a completely integrated active system and a functional cast aluminum grill doubles as a heat-sink to minimize power compression and maximize driver performance.

The Cerwin Vega CVA115 features a custom Cerwin-Vega-designed driver that delivers thunderous bass. The powerful built-in 700 watt (1400 watt peak), high-efficiency Class H amplifier provides a highly qualified amp solution. The CVA series of subwoofers provides more user controls than other active subs in this class, allowing users to fully customize their sound. The controls include a sweepable low-pass filter, a 4-position high-pass filter and a Master/Slave mode providing easy set-up of multiple units. The subwoofer also features a 35mm pole-mount socket to accommodate a satellite speaker for full-range performance.

Cerwin-Vega decided to create a compact model to meet the needs of its customers who demanded a smaller form factor. Staying true to Cerwin-Vega`s legacy, the CVA115 is designed to deliver thunderous lows while still maintaining a crisp, clear mid range.

FEATURES:

    * 700 watts of power

    * 1,400 watts peak

    * Max SPL of 131 dB

    * Frequency response 41 Hz 135 Hz (-3dB)

    * Sweepable low-pass and 4-position high-pass filters

    * Master/Slave mode for easy setup of multiple units

    * Compact enclosure design

TECH SPEC:

  

  * 22 L x 18 W x 22 H

    * 93 lb.

(PRICE EACH)



ACTIVE DUAL 8” SPEAKER

The CVA-28 is a totally integrated, matched, and optimized active speaker system that provides powerful sound in a small, modular package. The system configuration starts with an innovative, 3 way, dual 8” design. The dual 8 configuration was chosen for optimized directivity and extremely clean, off axis response. The custom designed Cerwin-Vega! drivers also provide superior power handling, tight bass and refined mid-range. Finally, a compression driver is placed in the center of the top woofer in a concentric configuration. This design provides time-aligned high frequencies for incredible detail and imaging.

Matched to this impressive transducer array is a 400 watt integrated 3-way amplifier. With 800 watts peak output, the amplifier includes a dedicated EQ contour switch optimized for high SPL situations. A Sub/No Sub switch allows users to roll off the low end when used with a dedicated subwoofer, eliminating competing frequencies in the system. Connections include microphone, line, and instrument inputs through XLR and quarter inch connectors.

The CVA-28 can be mounted or installed in a myriad of ways thanks to integrated fly points, flyware kits, pole mount, and dual and triple speaker mount accessories. With or without its ActiveSeries subwoofer partners, the CVA-28 is just the best sounding active full range speaker in its class. Whether it’s hip hop, jazz, bluegrass or rock and roll, the CVA-28 provides the performance, power and flexibility you just can’t find elsewhere. If you’re looking for an upgradeable and accurately voiced speaker as part of your performance arsenal, the CVA-28 is the way to go.

FEATURES:

    * Dual 8-inch full range active speaker optimized for portability with incredible frequency response

    * Built-in amplification designed to optimize performance

    * Can be mounted or installedusing integrated fly points, flyware kits,pole mount, and dual and triple speaker mount accessories

    * Rugged Hardwood Enclosure,road-ready cabinet that is easy to transport fromgig to gig

    * Sub/No Sub switch allows users to roll off the low end with a dedicated subwoofer, eliminating competing frequencies 

TECH SPEC:

Power Continuous 400 wattspeak 800 watts

Frequency Response 70 Hz - 20 Hz (±3 dB)

Frequency Range 60 Hz - 20 Hz (-10 dB)

Max SPL 128 dB at 800 watts

Crossover Not Applicable

Connectors inputs XLR/F Balanced 1/4 TRS

outputs XLR/M 1/4“ TRS

Controls Level Line / Mic-D.I.No Sub with Sub Countour / OffPowerVoltage Selector

Driver HF Driver: CD34B, voice coil 34mm

MLF Driver: FR8C, 8 inch voice coil 2 inch

LF Driver: FR8B, 8 inch voice coil 2 inch

Nominal Beamwidth* Horizontal 50º

Vertical 50º

Voice Coil 4

Enclosure / Finish Multi-ply hardwood Coolex Paint

Dimensions Front 11” x 20” 279 x 520 mm Rear 8” x 12” 216 x 305 mm

Weight 48 lb (21.8 kg)

(PRICE EACH)





    Precision and quality design optimized for creating music mixes with computers.

    Silk dome tweeter delivering sharp and pure treble.

    4-inch woofers with Kevlar diaphragms delivering homogeneous and precise sound.

    Dual port delivering powerful bass restitution.

    Wooden satellite made from 9 mm MDF, compact speaker measurements.

    Audio inputs (for connecting a computer, DJing equipment, mixing gear, MP3 players, game consoles or other audio sources)

        RCA connector (main source)

        TRS connector (6.35 mm) for balanced input

        Line input for connecting MP3 players or other audio sources

Headphones output (speakers are automatically deactivated when headphones are connected).

    Controls:

        ON/OFF switch

        General volume adjustment

        Bass adjustment

        Treble adjustment

        Power light

        Ergonomic buttons based on Hercules DJ consoles, offering simple grip and use

* XPS: Extended Personal Sound

Technical specifications

    Total power output: 2 x 20Total power output: 2 x 20 W RMS

    Peak power: 80 W

    Frequency response: 60 Hz - 20,000 Hz

    Satellite measurements: 27.4 cm (H) x 19.2 cm (W) x 18 cm (D)

    Right satellite weight: : 4.22 kg Left satellite weight: 2.88 kg

    External power supply

    Magnetically-shielded satellites for an interference-free environment

    ROHS standard-compliant product

    Audio system installation

To ensure optimum speaker positioning, the satellites must form a 60° angle with each other and the same angle with the user. Also, the listening height must be adjusted at a level located between the tweeter and the wide-band medium speaker.

    Elaborate design

The XPS 2.080 DJ Monitor speakers have been developed with the assistance of DJing experts, and have been subjected to in-depth testing with audio professionals.

    Hercules engineers have taken great care when designing the XPS 2.080 DJ Monitor in a professional anechoic room.

This research enabled them to fine-tune the wide-range medium speaker’s Kevlar texture and the tweeter’s silk dome, to optimize the position, size and shape of the vents and to calculate the optimum curvature of the satellites’ front face, in order to obtain a sharp and balanced sound flow.

    Only the best materials are used, providing an outstanding listening experience

Box contents

2 amplified speakers

1 x power cable, 1 x 2 RCA (M) - 2 RCA (M) cable, 1 x satellite connection cable (2.5 m), 1 x mini-jack (M) - 2 RCA (F) cable

Warranty certificate and user manual

Description:



Perfect for leisure DJing, to create your first home studio. 



    *3-inch woofers with a Kevlar membrane for homogeneous, precise sound

    *2 ports per satellite, for powerful bass response

    *Wooden subwoofer, crafted of 9 mm-thick MDF

    *Audio inputs ( to connect a computer, DJ gear, mixer, MP3 player, game console or other audio sources)

        

*Main RCA line input on back of right satellite

        *Auxiliary 3.5 mm mini-jack line input on front of right satellite

    *Headphones output (the speakers are automatically cut off when headphones are connected)

    Controls:

        *ON/OFF switch

        *Volume control knob

        *Bass control knob

        *Treble control knob

        *Power LED

        *Ergonomic controls inspired by those on Hercules DJ consoles, for better grip and ease-of-use

 

*Extended Personal Sound

 

 

Technical specifications:

    *RMS power: 2 x 15 W RMS

    *Peak power: 60 W

    *Frequency response: 60 Hz - 20 kHz

    *Satellite dimensions: 22.5 (H) x 14 (W) x 17.7 (D) cm

    *Right satellite weight: 2.138 kg Left satellite weight: 1.738 kg

    *Internal power supply

    *Magnetically shielded satellites won’t disturb your surroundings

    *RoHS standard-compliant product

 

Box contents:

    2 amplified satellites

    1 connection cable between the satellites (2m)

    1 audio source cable (3.5 mm mini-jack [M] - 2 RCA [M])

    Warranty certificate and user manual

 

Minimum configuration:

PC / Mac® / netbook / CD/DVD player / MP3 player / TV set / game console

The boys at Intimidation have done it again, Active Speakers at dangerously low prices!&nbsp;


Intimidation PWX12 Active Speaker 12


The PWX 12 are the new hard wearing plastic active ranges from Intimidation. This ranges boast high specifications, are lightweight and easy to transport. The range has been constructed using high quality tailored components designed to deliver that perfect sound.



The boys at Intimidation have done it again, active speakers at dangerously low prices!


The PWX 15 powered DJ speakers&nbsp;are hard-wearing, boast high specifications and are lightweight and easy to transport. The range has been constructed using high-quality tailored components designed to deliver that perfect sound.


POWER RMS - 200W.

FREQUENCY RESPONSE - 55Hz -20KHz.

NOMINAL IMPEDANCE - 4 Ohms.

HF TYPE - 1&rdquo; Bullet.

DRIVER - PW-15200.

CABINET TYPE - Full Range.

NET WEIGHT - 27 kg .

DIMENSIONS - 390x410x615



LD Systems Maui 28 Compact PA Speaker System is the ideal solution for mobile DJs and musicians who want pristine sound quality in a compact and stylish design. No cables and stands mean that this is an easy assembly system.






MAUI 28 Overview
















The Maui 28 serves as a fantastic split between being a PA system for giving the audience the best audio quality, as well as serving as an excellent monitoring system for musicians. The line-array configuration ensures a greater and more even distribution of sound for even larger venues.


The Maui's intuitive mixer is easy to use for anyone want greater control over certain frequency ranges. In summary, this compact column PA system is ideal for anyone who wants high performance on the road.



The active loudspeakers LDPLAY12A and LDPLAY15A with integrated USB/SD-Card-Player and illuminated display offer comprehensive connectivity and setting possibilities for many types of applications like school, kindergarten, church, sports field, multimedia presentation, party room and so on. It is a very versatile and affordable sound system.

The USB/SD-Card-Player can be operated directly or by using the supplied infrared remote control from the front or from the rear side of the speaker. Simply plug in your USB-stick or SD-card and let the music play! Connectivity for external sound sources like microphone, CD-player, mixing board is also integrated like a 5-band equalizer that offers a various kind of sound settings. Ergonomic handles and a 35 mm standard stand support complete these great features.

Tech Spec:

Specifications:

    *Model Name: LDPLAY12A

    *Type: Bass Reflex

    *Components: 12 Woofer, 1.35 Compression Driver

    *Frequency Response: 60 - 18.000 Hz

    *Power Output (RMS): 180 W

    *Power Output (Peak): 400 W

    *Sensitivity (1 W/ 1 m): 97 dB

    *Controls: MP3 Level, Mic Level, Line Level, Master Volume, Treble, Bass, 5-Band Master EQ

    *Indicators: Clip, Power

    *Dispersion: 90° x 45°

    *Connectors:

    *Input: Mic (XLR, 6.3 mm Jack), Line (XLR, 2 x RCA)

    *Output: Line (XLR, 6.3 mm Jack)

    *USB/SD-Card-Player Controls: Power, Setup, Play/Pause, Mode, Vol. up, Vol. down, Previous Track, Next Track

    *USB/SD-Card-Player Connectors: USB, SD-Card, Infrared

    *Cabinet Material: PP

    *Dimensions (W x H x D): 425 x 640 x 365 mm

2-way active monitor speaker set comprising a powered unit with stereo amp module and a satellite passive unit. Designed for nearfield monitoring, home entertainment or as a small active background music system.

Features:

*Volume, treble and bass controls

*Magnetically shielded

*Power On/Off switch with LED indicator

*Supplied with RCA input lead and speaker link cable

*Fig.8 mains lead included

*Supplied with mounting brackets

Technical Specifications:

*Power supply : - 230Vac, 50Hz (60W)

*Woofer : - 135mmDia (5.25) PP cone

*Tweeter : - 25mm balanced dome

*Frequency response : - 60Hz - 20kHz

*Power rms : - 30W

*Sensitivity : - 89dB

*Dimensions : - 240 x 180 x 155mm

*Weight (per set) : - 4.6kg

*Colour : - White

This range of inexpensive powered speaker enclosures feature woofer sizes ranging from 20cm (8) up to 38cm (15). The cabinets feature bass treble and volume controls, housed in a trapezoidal ABS plastic enclosure with rigid steel grille. Ideal for small venues and mobile DJ applications.

FEATURES:

*Volume, treble and bass controls

*Line output via XLRM connection

*Titanium compression drive

*Lightweight ABS enclosure

*35mmØ Internal top hat

*Version 	QR15A 38cm (15)

*Woofer 	38cm (15) 4ohms

*Power max 	500W

*Power rms 	250W

*Frequency response 	45Hz - 20kHz

*SPL @ 1W/1m 	101dB

*Dims: W(front/rear) x H x D 	430/250 x 680 x 360mm

*Weight 	15.8kg

(PRICE EACH)



NOW DISCONTINUED PLEASE SEE https://www.thedjshop.co.uk/qtx-qs12a-active-abs-speaker-12in-price-each.html



Active speaker cabinets with tough yet lightweight ABS enclosures, designed to satisfy the demands of the modern DJ or musician. Each enclosure has a trapezoidal design with easy-carry handle and 35mmØ top hat for stand mounting.

FEATURES:

    *Lightweight ABS enclosure

    *Built-in amplifier

    *2 x balanced mic inputs via XLR or 6.3mm jack sockets

    *Line input via balanced XLR or twin unbalanced RCA connections

    *Balanced line output via XLR or jack

    *Mic. volume, treble, bass and master volume controls

    *Low impedance compression horn driver

    *Trapezoidal design

    *M8 rigging points

    *35mmØ top hat with locking screw

    *Supplied with stands for use as a wedge monitor

    *Rigid steel grille

    *Easy-carry handle

Power supply: 	230Vac, 50Hz

Supplied: 	Single

Crossover frequency: 	3kHz

Dispersion: 	105 x 55

Input sensitivity: 	1V (p-p)

System: 	Full Range

THD: 	<3%





Active speaker cabinets with tough yet lightweight ABS enclosures, designed to satisfy the demands of the modern DJ or musician. Each enclosure has a trapezoidal design with easy-carry handle and 35mmØ top hat for stand mounting.

FEATURES:

    *Lightweight ABS enclosure

    *Built-in amplifier

    *2 x balanced mic inputs via XLR or 6.3mm jack sockets

    *Line input via balanced XLR or twin unbalanced RCA connections

    *Balanced line output via XLR or jack

    *Mic. volume, treble, bass and master volume controls

    *Low impedance compression horn driver

    *Trapezoidal design

    *M8 rigging points

    *35mmØ top hat with locking screw

    *Supplied with stands for use as a wedge monitor

    *Rigid steel grille

    *Easy-carry handle

TECH SPECH:

*Model: 	QS15A

*Woofer: 	38cm (15)

*Tweeter: 	35mm (1.38)

*Power max. 	700W

*Power rms. 	350W

*Frequency response: (-3dB) 	50Hz - 18kHz

*Model: 	QS15A

*Frequency response: (-10dB) 	45Hz - 20kHz

*SPL: @ 1W/1m 	99dB

*Dimensions: 	690 x 460 x 400mm

*Weight: 	26.5kg

With the Nadir 10, SINN7 presents the appropriate active subwoofer for the high end near field monitor speakers Zenit 5 and Zenit 8. Just like these speakers, the Sinn7 Nadir.10 is equipped with woofers made of a fiber glass composite material. Low pass and high pass filters, phase reversal and volume adjustment allow an individually optimised adjustment of the Nadir subwoofer. 111 dB acoustic pressure, 225 W max. capacity and a highly sophisticated bass refley provide for a bass playback par excellence in every studio.

    * 100 watt RMS active subwoofer

    * Maximum capacity: 140 watt

    * Type: one-way / bass-reflex system

    * Acoustic pressure level: 88 dB

    * Speaker: 25.4 cm woofer

    * Frequency range: 40 Hz - 150 Hz

    * Connections: XLR, 6.3 mm jack and RCA (10 kohm, symmetric as well 

       as asymmetric)

    * Dimensions: 398 x 355 x 383 mm

    * Weight: 18.6 kg (per speaker)



With the Nadir 10, SINN7 presents the appropriate active subwoofer for the high end near field monitor speakers Zenit 5 and Zenit 8. Just like these speakers, the Sinn7 Nadir.10 is equipped with woofers made of a fiber glass composite material. Low pass and high pass filters, phase reversal and volume adjustment allow an individually optimised adjustment of the Nadir subwoofer. 111 dB acoustic pressure, 225 W max. capacity and a highly sophisticated bass refley provide for a bass playback par excellence in every studio.

* 100 watt RMS active subwoofer

* Maximum capacity: 140 watt

* Type: one-way / bass-reflex system

* Acoustic pressure level: 88 dB

* Speaker: 25.4 cm woofer

* Frequency range: 40 Hz - 150 Hz

* Connections: XLR, 6.3 mm jack and RCA (10 kohm, symmetric as well

as asymmetric)

* Dimensions: 398 x 355 x 383 mm

* Weight: 18.6 kg (per speaker)

The Yamaha DXR12mk2 12&rdquo; Active PA Speaker features an intelligent multi-band D-contour compressor which enhances your sound. Alongside it there is a FIR-X tuning feature which not only splits your high and low frequencies but also stops phase issues within the mid-range, resulting in clear sounds and smooth crossovers. The amplifier type is class-D, has a continuous power rating of 700 watts and a total dynamic power of 1100 watts. There is an impressive 134 dB SPL output and a frequency range of 52Hz &ndash; 20kHz, really capturing those low sounds.

The Yamaha PA Speaker features an integrated three-channel mixer which allows you to balance your sound sources with ease. There are two &frac14;&rdquo; jack inputs, one XLR/&frac14;&rdquo; jack combo input and two RCA inputs.

Integrated into the speaker is a 50&deg; symmetrical floor monitor angle. Additionally, there are two 35mm speaker pole mounts at 0&deg; and 7&deg;, which allows for more speaker positioning options, along with two top and one rear rigging points.

One final and important thing to mention is when you register your DXR12mk2 Speaker on Yamaha&rsquo;s website, you will receive an extended seven years warranty, at no extra cost!


The Yamaha DXR15mk2 15&rdquo; Active PA Speaker features a dynamic power of 1100 watts, a class-D amplifier and a continuous power rating of 700 watts. There is a frequency range of 49Hz &ndash; 20kHz, capitalising on those low sounds, and an SPL of 134 dB.


The FIR-X tuning feature not only splits your high and low frequencies but also stops phase issues within the mid-range, resulting in clean sounds and extremely smooth crossovers. Added to this is an intelligent multi-band D-contour compressor, which boosts your sound.


This Yamaha Active Speaker features an integrated three-channel mixer that enables you to balance your sound sources with ease. There are two &frac14;&rdquo; jack inputs, one XLR/&frac14;&rdquo; jack combo input and two RCA inputs.


Integrated into the speaker is a 50&deg; symmetrical floor monitor angle. Additionally, there are two 35mm speaker pole mounts at 0&deg; and 7&deg;, which allows for more speaker positioning options, along with two top and one rear rigging points.


One final point worth mentioning is when you register your DXR15mk2 Speaker on Yamaha&rsquo;s website, you will receive an extended seven years warranty, at no extra charge!



The Yamaha DXR15 is a compact active PA speaker system, and is part of the DXR loudspeaker series. Designed in collaboration with NEXO, world leaders in sound reinforcement, the DXR series draws on decades of speaker experience. 

The Yamaha DXR15 builds on the success of the acclaimed DSR Series by combining the latest acoustic technologies with advanced digital sound processing to deliver unpresidented performance in a compact and lightweight system. 

The DXR15 features a 15-inch low-frequency driver, and 1.4-inch high-frequency driver powered by a Class-D amplifier delivering 1100W of dynamic power. Overseen by NEXO, the class-leading DXR15 encompasses intelligent 48-bit precision DSP with sophisticated C-Contour multi-band dynamic processing, FIR-X digital crossover filtering and DSP controlled protection throughout the signal chain. 

The Yamaha DXR15 also features a convenient integrated 3-channel mixer and advanced smart linking function with stereo/mono option. Front and rear pole-mounting is available as well rigging points for flying or using the optional U-brackets (sold seperately). All DXR systems can be fully expanded by adding DXS subwoofers.

Tech Spech:

*15-inch low-frequency driver and 1.4 high-frequency driver

*Class-D Amplifiers deliver 1100W of dynamic power

*133dB maximum SPL

*49Hz to 20kHz frequency range

*Sophisticated D-CONTOUR multi-band dynamic processor

*FIR-X Digital Crossover Filtering

*48-bit precision

*DSP controlled protection throughout the signal chain

*Intelligent on-board 3-channel mixer

*Smart linking function with stereo/mono option

*Front and rear pole-mounting

*Flyable via provided M10 rigging points or using optional U-brackets

*System expandable through adding DXS subwoofers: DXS12 or DXS15

*Weight: 19.3kg

*Designed in collaboration with NEXO



The Yamaha DXR10mk2 10&rdquo; Active PA Speaker hosts a selection of quality audio technology within a lightweight and robust casing. It features an impressive 132 dB SPL output and a frequency range of 56Hz &ndash; 20kHz.


The 2-way, bi-amped, bass reflexed powered speaker features a notable multi-band D-contour compressor which boosts your sound. There is a FIR-X tuning feature which not only splits your high and low frequencies but also stops phase issues within the mid-range, resulting in clear, less clogged up sound. The Class D amplification is highly efficient with a 700 watts continuous output and has a dynamic power of 1100 watts.


The Yamaha&rsquo;s integrated three-channel mixer allows you to balance your input sources. These are available in the form of two &frac14;&rdquo; jack, one XLR/&frac14;&rdquo; jack combo and two RCA inputs. There are also two 35mm speaker pole mounts at 0&deg; and 7&deg;, which allows for more speaker positioning options. Built in to the unit is a 50&deg; floor monitor angle. Additionally, there are two top and one rear rigging points.


Not only do you get all of the above, but when you register your Yamaha DXR10mk2 Speaker on Yamaha&rsquo;s website, you will receive an extended seven years warranty, free of charge!



The Yamaha DXR10 is a compact active PA speaker system, and is part of the DXR loudspeaker series. Designed in collaboration with NEXO, world leaders in sound reinforcement, the DXR series draws on decades of speaker experience. 

The Yamaha DXR10 builds on the success of the acclaimed DSR Series by combining the latest acoustic technologies with advanced digital sound processing to deliver unpresidented performance in a compact and lightweight system. 

The DXR10 features an 10-inch low-frequency driver, and 1.4-inch high-frequency driver powered by a Class-D amplifier delivering 1100W of dynamic power. Overseen by NEXO, the class-leading DXR10 encompasses intelligent 48-bit precision DSP with sophisticated C-Contour multi-band dynamic processing, FIR-X digital crossover filtering and DSP controlled protection throughout the signal chain. 

The Yamaha DXR10 also features a convenient integrated 3-channel mixer and advanced smart linking function with stereo/mono option. Front and rear pole-mounting is available as well rigging points for flying or using the optional U-brackets (sold separately). All DXR systems can be fully expanded by adding DXS subwoofers.

Tech Spec:

*10-inch low-frequency driver and 1.4 high-frequency driver

*Class-D Amplifiers deliver 1100W of dynamic power

*131dB maximum SPL

*56Hz to 20kHz frequency range

*Sophisticated D-CONTOUR multi-band dynamic processor

*FIR-X Digital Crossover Filtering

*48-bit precision

*DSP controlled protection throughout the signal chain

*Intelligent on-board 3-channel mixer

*Smart linking function with stereo/mono option

*Front and rear pole-mounting

*Flyable via provided M10 rigging points or using optional U-brackets

*System expandable through adding DXS subwoofers: DXS12 or DXS15

*Weight: 14.6kg

*Designed in collaboration with NEXO

The Yamaha DXR8mk2 8&rdquo; Active PA Speaker boasts an array of audio technology onboard a deceiving lightweight exterior. Not only does it feature an impressive 130 dB SPL output, but also a frequency range of 57Hz &ndash; 20kHz. 


The 2-way, bi-amped, bass reflexed powered speaker features an intelligent multi-band D-contour compressor which enhances your sound, while the FIR-X tuning not only splits your high and low frequencies but also stops phase issues within the mid-range. The Class D amplification is highly efficient with a continuous output of 700 watts and has a dynamic power of 1100 watts.


The Yamaha&rsquo;s integrated three-channel mixer allows you to configure input sources. These are present in the form of two &frac14;&rdquo; jack, one XLR/&frac14;&rdquo; jack combo and two RCA inputs. There are also two 35mm speaker pole mounts at 0&deg; and 7&deg;, which allows for flexible positioning.


When you register the Yamaha DXR8mk2 Speaker on Yamaha&rsquo;s website you receive an extended 7 years warranty at no extra cost to you! Overall, this Active PA Speaker is a little force to be reckoned with.





The Yamaha DXR8 Active Loudspeaker offer superb high-definition sound and class-leading sound pressure levels in a compact and functional design. In collaboration with French loudspeaker giant NEXO, the DXR8 has been designed for use in environments where audio quality is essential; perfect for front-of-house sound, simple amplification, installations, rigged applications and more.

High-Definition Sound

Yamaha ultilize their proprietary 48bit Digital Signal Processing, fully customized, premium-grade transducers and extremely accurate constant directivity horn, each full-range model is designed to ensure that the entire audience enjoys the same crystal-clear highs, throbbing bass and focused mids.

Ultimate Power

Yamaha`s next-generation high-efficiency Class-D power amplifiers deliver extremely high output levels, with very low distortion and incredibly natural sound from their compact and lightweight modules. Combined with rugged, non-resonant enclosures, custom designed high power handling transducers and formidable DSP, each speaker delivers class-leading SPL while retaining all the precise dynamics and clarity of the original sound.

Outstanding Reliability

Yamaha`s mastery of DSP utilization extends beyond sonic control, offering total management of the ongoing signal inside the system. Tour-proven, fail-safe protection functions ensure that the power supply, power amplifier and transducers all perform at their maximum potential even after extended durations of usage in the most severe conditions. Housed in sturdy, road-tested enclosures with heavy-duty steel grilles, each speaker promises enduring reliability you can count on.

Unrivaled Versatility

Yamaha`s durable, lightweight enclosures weren`t designed just to look great; their versatile, compact design offers superior functionality in front-of-house, floor monitoring and installed applications. Every aspect of their physical design, from dimensions and shape, to rigging options and tzhe accessibility of components attached to the enclosure, allows them to adapt seamlessly to countless sound reinforcement applications.

Yamaha DXR8 Active Loudspeaker Main Features Include

Max SPL (Range) 129dB SPL ~ 133dB SPL

High-efficiency Class-D amplifiers: 1100W (DXR)

Frequency response (Range) 45Hz ~ 20kHz

Bass reflex system type

Custom designed transducers (in colab with NEXO)

FIR-X© tuning crossover type •	D-Contour multi-band dynamic processor

Intelligent onboard 3-channel mixer with mic/line input

Switchable HPF

Dual-angle pole mount socket

Symmetrical enclosure design for mirror mode monitoring

Rigging points (standard eye bolts or optional U-brackets)

Link Out with mono/stereo mode

7 Year Warranty

Yamaha DXR8 Specifications

Power Rating: 1100W

Maximum SPL: 129dB SPL

57Hz-20kHz Frequency Range

LF: 8 cone

HF: 1.4 diaphragm, 1 throat

Coverage Angle: XH90xV60

Yamaha`s STUDIO series monitors have been designed with serious monitoring in mind. Emphasis is on reference-quality reproduction precision that lets you hear sonic details, rather than flattering sound. They carry on in the tradition of the venerable NS10M STUDIO monitor speaker, which was the definitive near-field speaker monitor in an overwhelming majority of professional studios throughout the world for many years from the 80s onward. But technology has evolved dramatically right throughout the audio chain, and speakers must follow suit. The new top-of-the-line MSP7 STUDIO Powered Monitor Speaker is capable of delivering consistent quality and performance that you can rely on in modern production environments that handle any combination of digital and analog sources as well as stereo and surround formats.

FEATURES:

*2-way bass-reflex bi-amplified near field studio monitor

*5 cone woofer and 1 titanium dome high-frequency unit delivers 50Hz- 40kHz frequency response

*67 watts (LF 40W + HF 27W) dynamic bi-amplified power.

*XLR balanced input and 1/4 unbalanced input.

*31 positions Level Control facilitates precise overall system level matching.

*TRIM Control(High/Low).

*Full magnetic shielding.

An Ideal Choice for Small Project Studios

Like the larger MSP7 STUDIO, the MSP5 STUDIO is a two-way bi-amplified bassreflex system that delivers outstanding monitoring precision for digital or analog production in stereo or surround formats. The more compact dimensions of the MSP5 STUDIO make it an ideal choice for smaller project studios and DAW based production systems. The MSP5 STUDIO features a 5 inch cone woofer driven by a 40-watt amplifier and a 1 inch dome tweeter driven by a 27-watt amplifier. Other than woofer size, enclosure size, and amplifier power, the MSP5 STUDIO takes advantage of the same advanced materials and design technology that are behind the extraordinary performance of the MSP7 STUDIO. The woofer and titanium-dome tweeter feature advanced magnetic structures that achieve exceptionally low distortion, and the tweeter works with a unique waveguide horn that achieves broad, uniform high frequency dispersion over 120 degrees for optimum balance regardless of listening position. Advanced driver and enclosure design - including the low-diffraction rounded baffle - also ensure smooth, uniform dispersion across the system`s full reproduction range. Flat frequency response out to 40 kHz makes the MSP5 STUDIO great for mastering, where high sample and bit rates are the norm.

Magnetically Shielded Enclosures

Along with their compact size and excellent performance, full magnetic shielding allows the MSP5 STUDIO speakers to be positioned near all types of audio, video, and computer equipment without sound degradation or negative effects on surrounding equipment.

Professional Connectivity

The MSP5 STUDIO has a balanced XLRtype input for direct compatibility with professional equipment. Balanced lines are ideal if the speakers are to be placed at the end of long cable runs which, if unbalanced, might be susceptible to hum and induced noise. The MSP5 STUDIO also offers an unbalanced 1/4 phone jack connector.

Trim Switches for Easy Room Matching

The MSP5 STUDIO is equipped with four position low and three position high trim switches that allow the system`s response to be optimized for a wide range of acoustic environments.

Refined Monitoring Precision:

The choice of top recording and production engineers who demand unmatched accuracy and resolution that reveals critical sonic details. An unbeatable choice for production environments handling any combination of digital and analog sources in stereo or surround formats.

Yamaha`s STUDIO series monitors have been designed with serious monitoring in mind. Emphasis is on reference-quality reproduction precision that lets you hear sonic details, rather than flattering sound. They carry on in the tradition of the venerable NS10M STUDIO monitor speaker, which was the definitive near-field speaker monitor in an overwhelming majority of professional studios throughout the world for many years from the 80s onward. But technology has evolved dramatically right throughout the audio chain, and speakers must follow suit. The new top-of-the-line MSP7 STUDIO Powered Monitor Speaker is capable of delivering consistent quality and performance that you can rely on in modern production environments that handle any combination of digital and analog sources as well as stereo and surround formats.

Features:

*2-way bass-reflex bi-amplified near field studio monitor

*6.5 cone woofer and 1 titanium dome high-frequency unit delivers 45Hz- 40kHz frequency response

8130 watts (LF 80W + HF 50W) dynamic bi-amplified power.

*XLR balanced input.

*31 positions Level Control facilitates precise overall system level matching.

*Low Cut switch and TRIM Control (High/Low).

*Full magnetic shielding.

Powered for Uncompromised Quality

The trend towards choosing powered speakers for production monitoring is based on some very sound logic. By integrating and matching the power amplifiers and speakers, the relationship between them can be kept under perfect control for superior performance in the widest possible range of systems. Naturally the power amplifiers themselves are of the finest quality and, unlike component power amplifiers that must be designed for acceptable matching with the widest possible range of speakers, are designed and manufactured specifically to drive the system`s woofer and tweeter in their specific enclosure. No matter where the MSP7 STUDIO monitors are used, and with what sources or other audio gear, you know that you`re always receiving the benefits of a perfectly matched power amplifier and speaker system. You`ll hear the difference. You`ll also benefit from the convenience of not having to deal with external amplifiers and cabling.

Advanced Bi-amp Design

There are a number of advantages to multi-amp speaker setups, but the added cost and extra equipment required can make them impractical in many situations. With the MSP7 STUDIO everything you need is builtin - all you have to do is supply the line-level input. The 6.5 inch cone woofer is driven by an 80-watt power amplifier, while the 1 inch dome tweeter has its own 50-watt power amplifier. In the MSP7 STUDIO this particular power and driver combination results in the perfect balance between the low-mid and high frequency ranges. The frequency ranges are divided via a carefully designed electronic crossover before the power amplifier inputs, featuring steep 30-dB/octave roll-off curves in both the low- and high-pass filters. The steep roll-off minimizes inter-modulation between the frequency bands at the crossover point, achieving significantly smoother, cleaner crossover performance in the critical midrange. And the fact that the crossover is a linelevel electronic design completely eliminates the loss, distortion, and sometimes severe inter-modulation that are almost unavoidable in conventional passive crossover networks driven by a single power amplifier.

Details that Define Superior Performance

The MSP7 STUDIO woofer and tweeter units feature some important design innovations that contribute directly to improved sound quality. The 6.5 inch woofer, for example, features a specially treated polypropylene cone with lowdamping rubber surrounds for exceptionally smooth response. Low-reflection highrigidity die-cast magnesium baskets both maximize mechanical precision while minimizing unwanted coloration of the speaker`s output. The 1 inch tweeters feature titanium domes that offer the perfect combination of light weight and rigidity for precise reproduction right up to 40 kHz. The tweeters have a powerful magnetic circuit that results in extremely fast response for crisp, natural transients, and are integrated with a waveguide that achieves uniform high frequency dispersion of 120 degrees. But precision manufacturing makes a huge contribution to performance as well as basic materials and design. The slightest eccentricity in the alignment of the tweeter domes and waveguides, for example, can seriously affect performance. So can the alignment of the coils and magnetic circuits. These are details that require a considerable investment of energy and resources to do properly, and they are exactly the details that make the MSP7 STUDIO the superior studio monitor that it is.

Magnetic Shielding That Won`t Distort Your Sound

In today`s production environment, which often includes computer and video displays as well as a range of magnetic media, magnetic shielding is essential. Conventional magnetic shielding schemes have the unfortunate side effect of distorting the magnetic flux of the speaker`s critical magnetic circuit. The end result is distorted sound. This obstacle was effectively overcome in the MSP7 STUDIO with a new advanced magnetic structure that achieves effective shielding while maintaining the integrity of the speaker`s magnetic circuit for significantly lower distortion as well as an improved definition.

One-piece Molded Enclosure with Rounded Baffle

Wood can be good, but synthetic materials have advanced to the point where they offer some overwhelming advantages. In addition to the fact that enclosures materials can be created with ideal density and resonance characteristics, they can be molded to almost any shape with precise tolerances. Where wood cabinets have glued joints that interrupt the continuity of the enclosure, the thick walled MSP7 STUDIO cabinet is molded in one piece, resulting in smooth acoustic transfer throughout the entire enclosure for superior reproduction precision. One-piece molding also makes it possible to produce the large-radius rounded baffle corners that help to maintain a natural wavefront and minimize diffraction for a smoother, more uniform polar response, as shown in the accompanying plots. Internal tweeter mounting also boosts high-frequency performance by eliminating spurious resonance from the tweeter frame.

Connectors and Controls

The MSP7 STUDIO features a balanced XLR-type connector for input. This provides direct compatibility with professional gear and allows the use of balanced lines for maximum audio quality even where long cable runs are required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enable you to adjust the bass and treble in four and three positions, respectively (+1.5 dB/0 dB/-1.5 dB/-3 dB at 50 Hz and +1.5 dB/0 dB/-1.5 dB at 10 kHz), so that the system`s response to be quickly matched to the room. There`s also a low cut (FLAT, 80 Hz, 100 Hz) switch that is useful when the MSP7 STUDIO is used with the SW10 STUDIO subwoofer. The AC power cord is removable for easy transportation and setup.

Refined Looks for Refined Sound

The MSP7 STUDIO features a refined appearance that is a perfect match for its outstanding monitor performance. It is in fact functional beauty that results from an uncompromising approach to reproduction quality. The elegant rounded baffle has been primarily designed for superior dispersion characteristics, and is visually balanced by a high-efficiency rounded heat sink on the rear panel. The integral waveguide horn also contributes to outstanding sound while adding to the speaker`s visual appeal. Some speakers are designed to look good. The MSP7 STUDIO has been designed throughout for superior sound, and looks great as a result.

Pioneer cdj 1000 good condition perfect working order a few marks 

Description
DJ or lighting 100% Black Wool Trestle cloths for Events or Productions fitted for standard hire table. Top-stitched edges with side flap. 100% wool and fire rated for Events. Custom made cloths for generic use.  Please note cable holes have been cut to thread cables through on one cloth on corner and one edge hence price see pics. Perfect for events, parties, markets jumbles or any events requiring trestles. EXCELLENT QUALITY Cost more to stitch just one!

See also JEAN Patchwork trestle cloths for 4 additional bespoke cloths


Dimensions
175cm long x 60cmwide x 74cm high

Selling £15 & £35 total £50.00 Postage P&P £8.95 due to weight

Payment
Cash on collection only
Collection only from Bethnal Green
Please see other items as I am having a clear out. I am selling items through other mediums, not just e-bay. So if an Item does not have a bid it may have an offer elsewhere.
All items come from a smoke & moth free home using eco products. 



Laser World ES 800RGB (Ex Display) (Archived)

Description

Location

Item lent by TheDJShop

Other items from TheDJShop

FAQs

Laser World ES 800RGB (Ex Display) (Archived)

Explore other options around London