share
share

Tilta Hydra Alien car mounting system Ronin Rs2

Daily

£20.00/day

7 Days +

£20.00/day

30 Days +

£10.00/day

share
share
Tilta Hydra Alien car mounting system Ronin Rs2

Description

Film & Photography

>

Accessories

>

Rigs / Stabilisers / Gimbals

Enquire before Booking TILTA HYDRA ALIEN CAR MOUNT SYSTEM FOR RONIN RS2 V mount version ABOUT Utilizing technology from our Tilta Arm and forthcoming Hydra-Arm system, we have devised a more portable mounting solution that adapts the RS 2 for camera placement, stability, and portability that has usually been restricted to big budget productions. Multiple options of suction cups facilitate installations on car doors, car hoods, or any oth...

er flat surfaces. It functions like a Russian Arm and switches with ease from high angle to low angle, and many other positions; all within one take. The remote control hand unit is user friendly and supports remote run/stop. TILTA HYDRA ALIEN SYSTEM INVENTORY * Dovetail Plate L1 for Hydra Alien * Dovetail Plate L2 for Hydra Alien * Dovetail Plate L3 for Hydra Alien * Dovetail Plate L4 for Hydra Alien * Dovetail Connector Plate for Hydra Alien * Large Suction Cup for Hydra Alien * 2x Small Suction Cup for Hydra Alien * Shock Absorbing Arm with Hydraulic Damping Pole for Hydra Alien * 90 Degree Adapter for Shock Absorbing Head for Hydra Alien * Shock Absorbing Head for Hydra Alien * Power Supply Base Plate for RS 2 with power cable * Dual Battery Plate Support Bracket for Hydra Alien (1 x 8-piece set) 220g Counterweight (1 x 10-piece set) Cable Clamp Suction Cup for for Hydra Alien * Tool Kit for Hydra Alien * Safety Belt * 2x V-Mount Battery Plate for Hydra Alien * Car Mounting Hard Shell Waterproof Safety Case for Hydra Alien £80 ----POWER---- V mount 2 of each available 220wh £25/35 150wh £15 98wh £10 98wh nano £15 50wh Nano £10 * DAMPERZEN SHOCK ABSORBER PLATE (for car mount) £30 Add this onto the kit for further shock absorption. The standard Tilta vibration isolator is relatively stiff and can't be adjusted. The Damperzen simply fits onto the existing baseplate and provides an additional baseplate for the RS2 mount. RONIN RS 2 INVENTORY * RS 2 GIMBAL ESSENTIAL KIT £20 * RS 2 GIMBAL COMBO KIT £30 - RAVEN EYE IMAGE TRANSMISSION SYSTEM - PHONE HOLDER - BRIEFCASE HANDLE - FOLLOW FOCUS EXTRAS: * TILTA AXIS COUNTERWEIGHT CLAMP (LARGE CAMERAS) £5 * COUNTER WEIGHTS (2 of each) 100g /200g £1/£2 * TILTA EXTENDED QUICK RELEASE BASEPLATE £5 * DJI 3D FOCUS SYSTEM £20 **DEPOSIT REQUIRED** Holding deposit of £100 required for loss of parts. 80% of my kit hires will return with missing parts. I am tidally locked into chasing overwhelming borrowers for missing items. Usually it's a USB cable, or a generic screw, usually something I can replace quite easily. However this kit has small components which I can't replace easily or immediately. Any loss at all means I have an incomplete build which will prevent it from going out on a later hire for security reasons. This will have a serious impact on my business. If you don't agree to a holding deposit scheme. I will assume you lack the confidence in looking after the kit, therefore deny the rental. -----THE RENTAL----- TWIN CHECKS * You will be given a sheet of all the components on collection. Along with a PDF of the Items with pictures and names. * I will go through and confirm that 100% of the kit is present by ticking off the Kit sheet. * You will take images on your phone and send it directly to me to confirm all is present in your presence. * Prior to hire, I will send you a link from Tilta official with an assembly guide to help you set up efficiently and properly. * On return we will carry out a final twin check on the same sheet to ensure all is back. * If all kit is present and in good condition you will have the holding deposit immediately returned to you. * If there are missing items, the holding deposit will be kept until the safe return of the items. If you manage to source the parts and return immediately before the hire date ends. You will be given the full deposit back. If you are unable to source missing parts. The holding deposit will be kept. You will be charged £10 per individual item per day. Therefore if you fail to return 3 Items that will cost you £30 a day. The full system will be suspended from hire until its 100% present. This potentially will cost me £80 a day in hire loss. furthermore as a freelance videographer. * Loss or damage will be reported to fatllama and you're obliged to pay for the replacement parts in addition. * Replacement parts are most likely to come directly from Tilta, and can take weeks to arrive. * Borrowers who are prone to losing kit are highly likely to be repeat offenders, therefore will sadly have to be automatically blacklisted if they fail on this particular kit hire. -----During operation----- * DO NOT place the exposed pads on the ground at any time, this will collect dust and have major impact on performance. Pads are only ever to come into contact with vehicle or pad protector. * Firstly ensure assembly is secure. Double check everything twice. Especially the suction pads. These will communicate to you if there is a suction issue. * Note the suction pad performance can be impacted by various environmental factors. Is the surface... 1.) Flat and smooth. The pads can efficiently operate on a curved surface such as a bumper, but ensure this surface is flat with no dents, panel seams, ports/holes, accessories, aerodynamic moulding, edges, badges. 2.) Clean surface. Ideally you would wet clean the surface removing any dirt and debris. even microscopic particles can prevent a complete rubber to surface contact. 3.) Scratch free. you have found the suitable smooth clean flat spot. Double check it for scratches, A scratch can allow a slow air leak causing a defective pad. * Firmly tighten the components, but please don't over tighten, Overtightening can wear out the screw thread over time be fatal for the kit. I will be checking the kit for evidence of excessive force. Remember by design you shouldn't have to use force with well made kits like this. * Ensure the absorption arm is calibrated correctly, see video I send over. *TOP TIP* Ensure the Gimbal is pre-balanced well. If you intend to use the gimbal with a common direction of wind resistance you can compensate this in the camera balance. I.e if your camera is mounted to the side of the car and you're exposed to alot of air flow hitting your camera from the RIGHT hand side, the gimbal will behave as if the cameras is LEFT heavy. Simply slide the camera to the RIGHT to counteract this at the desired speed. The same will apply for front on. If the air flow will push against your camera from the FRONT, you will want to make your camera slightly front heavy. However If you will be Tilting and panning the gimbal in various directions you will be best having the camera centre balanced as standard. -----SAFETY----- NOTE: You may be inspired by many videos you see shot in the America! Remember their road are generally a lot wider and have more open space than UK roads. Please consider Road safety when mounting. Motorbikes and cyclists won't expect a mount to a car. Ensure you are familiar with the route. Any accidents will be expensive and dangerous. RS2 PRO EXTRAS: * DJI R TWIST GRIP DUAL HANDLE £5 * DJI TETHERED CONTROL HANDLE £10 * TILTA BASIC RING GRIP £10 * TILTA ADVANCED RING GRIP £20 * DAMPER SPRING HANDLES £5 * DJI EXPANSION BASEPLATE KIT (Includes Tether Handle) £20 * HAGUE HEAVY DUTY CAR MOUNT KIT £35 * DJI VERTICAL CAMERA MOUNT £5 CAMERAS BMPCC 4k / 6k RED KOMODO Canon 5DMKIV * Hollyland Mars 400s / pro £20/30 * ATOMOS * shinobi INFO: ***RAVENEYE IMAGE TRANSMISSION SYSTEM*** Allows live camera view and enables ActiveTrack 3.0 on DJI RS 2/DJI RSC 2, transmitting the camera live view directly on the Ronin app. * ***3D FOCUS SYSTEM*** Automatically detects the distance between the lens and subject and enables a center AF point for manual focus lenses. * ***DJI R Twist Grip Dual Handle*** The DJI R Twist Grip Dual Handle is equipped with NATO ports to enable holding of DJI RS 2/DJI RSC 2 in various configurations, such as with both hands and briefcase mode. * ****TETHERED CONTROL HANDLE*** The DJI Ronin Tethered Control Handle offers extended wired control of camera focus and parameters, camera shutter, and gimbal movement. * ***EXPANSION BASEPLATE KIT*** The DJI Ronin Expansion Base Kit makes it possible to mount and control DJI RS 2 in a jib, car, slider, cable cam, glide-cam and other platforms. *** ADVANCED GRIP RING*** The Advanced Ring Grip for RS 2 allows you more flexibility when powering your gimbal, mounting accessories, controlling wireless follow focus motors and operating the gimbal body. - *** JIB £10 *** CAR SUCTION PAD KIT £40 *** GLIDECAM £10 *** GLIDECAM / VEST £30 *** SLIDER £20-30

Read more

Location

Sw19 (London)

Item lent by Samuel

5.0

star

(685)

superlenderWhite

Superlender

ALWAYS DOUBLE CHECK AVAILABILITY OF ITEMS AND MYSELF BEFORE BOOKING: ALL ITEMS FEATURED ON MY PROFILE ARE PRICE CHECKED REGULARLY! AND ARE AMONG THE LOWEST ON FAT LLAMA! NOW PROVIDING DELIVERY: SUBJECT TO AVAILABILITY. OPERATION HOURS 7PM-11PM EV...

Typically replies within a few minutes

Other items from Samuel

FAQs

How does the request process work?

What is the cancellation policy?

Am I insured as a borrower?

How does Verification work?

Tilta Hydra Alien car mounting system Ronin Rs2

superlender

Samuel in London

5.0

star

(685)

Daily

£20.00/day

7 Days +

£20.00/day

30 Days +

£10.00/day

This lender is away so may not respond

People also viewed

?

© Fat Llama Limited 2021