Precision contractor saw module designed for use with the Workcentre TWX7, resulting in a full-featured saw table capable of professional results. Powerful 1800W motor and precision 254mm TCT blade. Accurate 86mm blade height adjustment and 0-45° bevel angle adjustment for performing complex bevel cuts. Protractor gauge and rip fence for performing rip cuts, cross cuts and mitre cuts. Dust extraction port located below the table surface for efficient, unobtrusive dust removal. Easy to assemble and configure and fully supported by optional accessories for extending functionality.

Set for fitting wooden tool handles. Includes 1 x hardwood wedge for use with steel wedges, and 2 x galvanised steel rings.

Disposable utility brush with pure bristles, wooden handles and zinc-plated steel ferrules. Ideal for cleaning parts, painting trim and applying touching-up. For use with paint, resin, glue, acetone and other solvents.

Moulded ABS plastic body with pocket clip. Lightweight structure reduces line sag and opposing hooks reduce drop-off. V-groove base for use on pipes. UV-resistant vial.

Corner brace angle brackets, zinc-plated for corrosion resistance. 2 x fixing holes. Ideal for shelving and bracing.

Flexible, durable plastic lid provides an air-tight seal and prevents spillage during transportation. Also prevents paint from drying out when stored. Fits Silverline 1.5Ltr Plastic Paint Kettle 416574.

Zinc-plated steel corner bracket for mending and reinforcing. Corrosion resistant with 4 x fixing holes.

Provides smooth protection for floors, cupboards, drawers and other hard surfaces. Also reduces noise of furniture being moved. Sticks to any hard surface such as wood, laminate and vinyl. Self-adhesive backing for fast, easy application.

Polyester microfibre flannel wash mitt. Fits comfortably on the hand for controlled cleaning and polishing of cars and other vehicles.

Tungsten carbide cutting tips for smoother, faster cut and prolonged life. Features 4 cutting edges for hard masonry materials. Double-fluted shank for efficient waste removal.


Tungsten carbide grit hacksaw blade for cutting tile, glass, marble, stone. Fits all  conventional 300mm hacksaw frames.

Thick, pure bristle and high-tech filaments are blended in a unique way to manufacture this paint brush. Natural wood beavertail handle and stainless steel ferrule. Optimised for use with oil-based paints and gloss. Excellent paint loading and even distribution.

Hardened and tempered serrated jaws with induction-hardened cutting edges. Moulded plastic handles with slip guards.

Self-adhesive sign provides warning notification of very hot water. EN7010 compliant. 


For fast cutting of aluminium sheet, pipes and profiles. Bayonet fiting HSS blade with milled, side-set teeth. Working length 75mm.

Flexible fibreglass tape measure. Tailors type with metal ends. Clear metric and imperial graduations. Width 15mm.

Chrome vanadium 6150 steel bits supplied in a handy storage case. 1/4" hex drive. Length 50mm.

Universal open-backed design. Plunge cut blade for use on wood, plastic and soft materials. Compatible with Silverline, GMC and Triton Oscillating Multi-Tools, and also tool-free, quick-change, and standard multi-tool machines.

Solid round filaments tapering from base to tip. For use with emulsion and other water-based paints, stains and compounds. Stainless steel ferrule for durability and corrosion resistance.

Heavy gauge steel square with metric and imperial graduations. Ideal for rafters, doors, window framing, stair layouts and many other applications.


Heavy duty construction for general usage. Single-sided PVC dot coat. 10-gauge cotton knitted liner. Seamless knitted glove, anatomical design and knitted wrist. Intermediate design.

Rubberwood head with long-life PVC bristles. For indoor and outdoor use wherever a hard-wearing brush is required. Compatible with 23mm (15/16") dia broom handles.

Universal open-backed design. For removing paint, sealant and adhesive. Compatible with Silverline, GMC and Triton Oscillating Multi-Tools, and also tool-free, quick-change, and standard multi tool machines.

Light and durable polypropylene door wedges. Holds doors securely open or partially shut as desired. Prevents slamming. Fits most doors. 120mm length.

HSS-R roll forged 4341 high speed steel. Manufactured to DIN340 with 118° point. General purpose 'jobber' drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow speeds for best results in metals.

High-strength rubber adhesive on a soft PVC carrier. Resistant to all weather conditions. Durable over long periods of time and peels off without tearing, unlike conventional tapes. Easily torn - even with gloved hands - with no need for knives or scissors. Commonly used for sheeting off areas to prevent dust and grime on surfaces and frequently used as a form of glass masking tape.

Premium tungsten carbide cutting edges and balanced, single-piece high-strength body. Twin flutes for clean, precise cutting. Suitable for softwood, hardwood, chipboard, MDF and plywood. Ideal for grooving, bevelling and chamfering.

PVC carrier and rubber adhesive, resistant to most common solvents. Vivid colours and easy to apply. Abrasion, moisture and wear-resistant. Adheres to a wide variety of substrates. Used for lane marking, floor marking, safety coding, hazard marking, identifying, sealing, colour coding, protecting, bundling in the automotive, aerospace, military, facilities management, transportation, marine and general industries. 130mic peel adhesion = 2.2N/25mm.

Single multipurpose drill bit with specially-designed tungsten carbide tip.  For use on steel, wood, masonry, uPVC, ceramics and concrete. Ideal for use in multi-construction environments.

Heavy duty steel body core drill with TCT cutting tips. Ideal for cutting clean holes in masonry. Use with 1/2" BSP compatible arbors and drills equipped with a safety clutch. Do not use with drills set in hammer action.

For use with electric drills. To mix paint, plaster, cement slurries and textured coatings. Hex shank. Requires 10mm or larger chuck. 500-700rpm.

Safely cleans nozzles of the Silverline HVLP Paint Sprayer (798866) without causing damage.

PVC-insulated pure copper cable for efficient power conduction with spring-loaded copper connectors. Suitable for vehicles with a battery start-up power of up to 200A. Length 2.2m.

Warning sign for use where the Prickle Strip is installed.

Chrome vanadium steel. Sizes: 50960: 1/20", 1/16", 5/64", 3/32", 1/8", 5/32" and 3/16". Sizes: HK09: 3/32", 1/8", 5/32", 3/16", 1/14", 5/16" and 3/8". Rigid plastic handle.

Zinc-plated for corrosion resistance. Includes spring washers M6 - M8; penny washers M6 x 25 x 1.3mm and M8 x 30 x 1.6mm; flat washers M3 x 6, M4 x 8, M5 x 10, M6 x 13, M8 x 16, M10 x 20, M12 x 23mm. Handy storage case with compartments.

Hardened and brassed 0.3mm steel wire bristles. For deburring, derusting and descaling, as well as paint removal, finishing and surface preparation. Can be stacked onto tapered spindles to achieve required thickness. Supplied with 12.70mm (1/2"), 15.88mm (5/8"), 19.05mm (3/4"), 22.23mm (7/8") and 25.40mm (1") bore adaptors. For use with all 150mm bench grinders.

Precision stainless steel rule with clear, etched markings. Metric and imperial graduations: 0.5mm, 1mm and 1cm metric; 1/2", 1/4", 1/8", 1/16", 1/32" and 1/64" imperial, W.W UNF scale and tap drill size table. Includes storage sleeve. Hanging hole for storage.

Makes perfect plugs for counter-bored holes. Achieves excellent finish when using same timber. Titanium-coated for extended working life. Sizes: 6, 8, 13 and 16mm.

Suitable for crafts and light DIY. Can also be used as a protective layer on shelves and in tool boxes. Cut to size. Open weave prevents build up of waste and maintains grip. Easy to clean.

Hardwood body with knurled brass adjusting screw and single hardened marking spur.

Pistol grip, chrome-plated grease gun. 2-position attachment for delivery tube. Spring-primed piston and air release valve. Supplied with straight and flexible delivery tubes. Accepts mini grease cartridges 90cc / 3oz. Safe working pressure 3000psi/200bar.

Self-adhesive sign provides notification of compressed gas in the vicinity or within a vehicle. EN7010 compliant.

Bright steel nails with very strong, round heads. Ideal for rough carpentry where appearance is not a priority. Approximately 77 nails per 1kg.

Forged, single-piece solid steel. Ground, hardened and tempered cutting edge. Double-injected soft-grip hand guard. Powder coated for corrosion resistance. For demolition, cutting and shaping of bricks and blocks.

Forged, single-piece solid steel. Ground, hardened and tempered cutting edge. Double-injected soft-grip hand guard. Powder coated for corrosion resistance. For cutting, prying and lifting floorboards.

Steel nails. Easily punched below the wood surface. Less likely to split the wood if driven in with the longer sides parallel to the grain. Suitable for joinery work where appearance is a priority. Approximately 125 nails per 1kg.

Traditional Yankee-style screwdriver with lockable collar to retract spiral shaft, which extends to 430mm length. Ratchet operates clockwise/anti-clockwise and in a fixed position. Includes 4 bits (2 x slotted and 2 x Phillips).

Self-adhesive sign provides notification of a fire door. EN7010 compliant. 


Heavy duty all-steel construction with hardened high-carbon steel parts. Easy stapling of carpet, insulation material, roofing felt and upholstery. Single-handed ergonomic grip for fast and easy operation. Quick to load and clear. For use with Type 10J staples 6 - 10mm.

Nylon frame fixing with zinc-plated countersunk steel screw for easy push-through installation. Designed for fixing into masonry and concrete, but suitable for fixing into a wide variety of substrates. Ideal for multiple fixing applications.


100% natural, biodegradable product. Rubberwood head with stiff bassine bristles and cane mix bristles. For indoor and outdoor use wherever a hard-wearing brush is required. Compatible with 29mm (1-1/8") dia broom handles.

Fire Door Keep Shut sign in photoluminescent, rigid, and self-adhesive options.

Seals gaps under garage doors preventing draughts, noise and dust from entering. Polypropylene bristles. Length 2134mm.

Provides notification of the presence of flammable liquid in the vicinity. Self-adhesive. EN7010 compliant.

Ideal fixing for flexible rubber hose, plastic hose and flexible pipes. Used in gardens, workshops and garages where an air or water-tight seal is required. Slotted 1/4" hex drive.

Chrome vanadium. Compatible with most current tamper-proof fastening systems. Includes bit holder and case.

Fully reversible action (clockwise / anti-clockwise). Soft-grip handle with protective guard. 1/2" square drive attachment can be used with sockets. Includes 13 x S2 steel bits: Phillips PH1, PH2, PH3 & PH4; slotted 5, 6, 8, 10 & 12mm; hex 4, 5, 6 & 8mm. Satin finish. Storage case.

Hardened and tempered drop-forged chrome vanadium steel. High quality polished finish.

Durable polypropylene compression fitting connector for use with MDPE (medium density polyethylene) pipe. Excellent performance under pressure. Suitable for underground cold water systems. Highly impact-resistant nut and body absorb high levels of thermal and mechanical stress. Simple and quick to connect and disconnect. Always use with pipe inserts. PN16 rating.

Durable and protective 900 x 35mm nylon handlebar tie-down straps with double reinforced loops. Thick protective fleece sleeve helps prevent wear and scratches on vehicle parts. Secures motorcycles, motocross bikes, quadbikes, ATVs and jet-skis in vans and on trailers. Universal fit and easy adjustment. Use with standard S-hook ratchet tie-down straps (not included).

Laminated steel body with protective bumper and chrome-plated, hardened steel shackle. Double locking. Includes 3 steel keys. Horizontal x vertical shackle clearance: 62 x 21.5mm. Shackle dia 6mm.

Drop-forged alloy steel. Separates ball joints on steering and suspension systems. Dual adjustment screws for wide range. For use on cars and light commercial vehicles. 20mm throat depth.

Includes 10 grinder heads and built-in speed regulator for precise work. Kit has 1.5m air hose with protective sleeve. Working pressure 90psi. Average air consumption 2cfm. 54,000rpm. Includes in-line oiler, oiler bottle, spanners and carry case.

Sandblasted finish. Fits any SDS Plus drill. Sizes: 5, 6 x 110mm and 7, 8, 10 x 160mm.

Firm backing pad for use with hook and loop polishing sponges, bonnets and sanding discs. Compatible with angle grinders and sander polishers. Max 12,200rpm.

Polyethylene jug with metric graduations.

Versatile hobby tool for securing objects when soldering and for jobs that require precision. Leaves hands free. Magnifying glass with 60mm dia lens. Heavy duty cast-iron base with adjustable joints, 2 x heavy duty crocodile clips, soldering iron holder and sponge. Ideal for electronics, crafts and model-making.

Solid brass radiator key. Fits most domestic radiators.

Forged steel head and hickory shaft. Powder-coated head with polished striking faces. Varnished handle for water and dirt-resistance. For demolition and driving of posts and stakes.

Hardwearing nylon fibre mop for sanding and cleaning concave surfaces in wood and metal. 6mm arbor, suitable for use with most power drills.

Hardened steel CV boot-clamping pliers, electroplated for corrosion resistance. Crimps and flattens clamp-on, ear-type CV joint boot clamps. 3/8"sq section holes in the handle shafts enable a torque wrench to be used with the tool when required. PVC-coated handles for grip and comfort.

TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For biscuit joints, slots and grooves. Max 13,000rpm. Use 13mm bearing for No. 20 biscuits and 19mm bearing for No.10 biscuits.

Female anchors for anchoring into concrete. Use in applications requiring a flush-mounted anchor and where a bolt needs to be inserted and removed. Also used to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. Yellow zinc passivated. For use indoors or out. Ideal for rapid, repetitive installations. Requires setting tool.

Premium quality fibreglass mesh reinforced silicon carbide cutting disc. Long life and fast, accurate cutting of stone, slab, tile, brick and block. Manufactured and certified to EN12413 with MPA approval. Suitable for all angle grinders. Expiry date stamped for safety.

Handy bottle opener made of blue anodised aluminium, with Silverline logo, mounted on a keyring.

High-quality, hardened chrome vanadium steel blade for superior performance and edge retention. Fully forged tang-through steel core connects the blade to the striking cap, providing strength and durability. Extra-large striking cap withstands repetitive hammer blows from any angle. Ergonomic, 2-tone, soft-grip handles for toughness and durability whilst maintaining user comfort. Precision-ground blade for maximum sharpness straight out of the box. Easily resharpenable.

High-density plastic for use on sheet lead, copper, zinc and aluminium. Moulded handle for firm grip. For use left or right handed. 

Water-resistant, soft-grip pocket lights, each with 8 x super-bright LEDs providing up to 11 hours' illumination. Ideal for home, car, garage or camping. Includes pocket/belt clip for hands-free use. 40 lumen output. Requires 3 x AAA batteries. Length 160mm.

Solid forged, hardened and tempered from hexagonal steel. Powder-coated with ground claw and chisel. For general wrecking and demolition work. Angled chisel end for leverage and claw with integrated nail puller.

Cast aluminium rule with clearly-marked metric and imperial graduations. Hanging hole for storage.

Protects valve against exposure to dirt and dust, avoiding potential for flat tyre.

Cast-iron body and rosewood handles secured by 2 brass screws. Milled sides, brass adjusting screw and heavy duty 2.4mm blade. Blade width 60mm.

Aluminium mechanical fastener with steel mandrel. Install into punched or pre-drilled holes suitable for all blind/pop riveting applications. Select grip based on combined thickness of material to be riveted. Suitable for fastening metals, wood and plastic.

6-point hex socket for maximum torque transfer to the face of the fastener. Precision cold-forged, hardened and tempered chrome vanadium steel. Fully polished and nickel chrome-plated for durable corrosion resistance. Chamfered ends and thin walls for positive location on fastener. Knurled ring provides grip and control in the hand, and bearing hole provides solid connection to the tool.

Tough flexible scraper with integrated handle. Curved edges for ergonomic grip. Dual-edged with ridges to dislodge ice. For scraping ice and snow off vehicle windscreens.

For clearing weeds and moss from decking and patio areas, avoiding need for harmful chemicals. Heavy duty point scraper clears gaps between boards. 3 x 10 rows of anodised and oil-tempered high carbon steel wire. Plastic head. Telescopic handle adjusts from 0.8-1.4m.

Spare diamond grit 65Mn saw blade suitable for marble, granite, glass, ceramic, hard tile, concrete and brick. Blade dia 110mm. Bore size 22.23mm. Fits GMC Compact Plunge Saw (936962).

Tungsten carbide-tipped. High standard, double flute for efficient waste removal. For concrete, masonry, lightweight block and stone.

Hardened steel replacement wheel for rotary copper pipe cutter. For 28mm pipe cutters.


Cast-iron frame with powder-coated finish. Fixed base and hardened steel jaw plates. Chrome-plated handle and lead screw. Iron casting resists distortion under high pressure.

Carbon steel banding tool for installation and tightening of band-style clamps on CV joint boots and power steering rack and pinion steering gear boots. Built-in cutter cuts the band by flipping the tool lever forward. Large, comfortable handle.

Fully hardened chrome vanadium steel blades with hardened, satin finish and magnetic tips. High-impact plastic handles. Includes 6 x Phillips: PH0 x 75, PH1 x 75, PH2 x 38, PH2 x 100, PH2 x 150 and PH3 x 200mm, and 6 x slotted: 3 x 75, 5 x 75, 6 x 38, 6 x 100, 6 x 150, and 8 x 200mm.

Hardened steel blade, extra-sharp teeth and pointed end for piercing plasterboard. Large soft-grip handle. Ideal for fitting socket boxes and down lights.

Mini medium-pile 26mm dia roller with woven fabric for high paint-loading capacity. For cutting in work with emulsion or masonry paints. Ideal on rough, semi-rough and uneven surfaces. Use on rendered masonry, brickwork, concrete and other textured surface coatings. Compatible with Silverline Mini Roller Frames.

Corrosion-resistant polished brass body and chain. Easy-to-read gauge and high-quality jubilee clip with vinyl-dipped thumbscrew. Ideal for quick pressure readings prior to appliance installation. For testing mains water pressure.


Arbors fit both 1/2" BSP TCT and diamond core drills. Includes ejector drift to remove taper guide drill.

180kg max lifting capacity. 19.8m polypropylene lifting cord on zinc-plated steel runners. 6:1 mechanical advantage.

Zinc-stearated aluminium oxide. Open coat reduces clogging. For rubbing down paintwork and sanding fillers, sealants and lacquers. 115mm x 5m.

910W sliding or fixed 127mm (5") dia circular saw that functions as a bench tool or TWX7 Workcentre module. Cast aluminium base with both metric and imperial graduations plus steel double-bar saw head mounting. Fine-toothed blade leaves a clean, smooth edge. Saw locks in place for table saw mode or free moving for a wider range of mitre and cross cuts when used with the supplied protractor fence with built-in quick release clamp. Up to 22mm cutting depth. Perfect for accurate, fast cutting of many materials including laminates, flooring, decorative wood and skirting board. Includes blade, protractor fence, quick clamp,  dust bag, blade key, push stick and TWX7 module fittings.

Precision has been at the very heart of Triton’s philosophy since 1976, when the first Workstation was produced. From design through to the completed product, Triton engineering is all about precision, and it’s this attention to detail that makes using Triton tools a pleasure, and gives us the satisfaction of knowing we have played a part in the final finish of your project. Offering an excellent choice of workshop power tools, the Triton family includes Work Support tools, Bench Top tools and versatile Work centre Systems, plus a comprehensive range of accessories perfectly complement Triton’s workshop systems to provide maximum versatility for every project. 

Key Features:

- Fitted with 40 x 3/4" (19 - 20mm) dog holes
- Universal compatibility with bench dogs, clamps and Anchors
- Easily configured for a wide range of woodworking applications
- Holes also usable for dust & chippings extraction
- Compatible with Twx7 work centre

What's in the box?

- Triton TWX7 Clamping Table Module 

Large diameter rugged transit wheel attachment for the workcentre chassis, suitable for transit across uneven terrain. Grooved tread pattern running the circumference of the wheel, ensuring maximum traction at all times. Internal bush insert design keep the wheels perfectly concentric to the axle, minimising wear and tracking deficiencies. External wheel covers protect the axle and fastening components from dirt and debris. Durable ABS moulded rugged transit handle. Pivot mounted for user comfort whilst in use. Large diameter handle mount ensures forces are distributed evenly during transit.

Universal open-backed design for use on wood, plastic and other soft materials. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

Handy set of the most popular sizes for cutting wood and metal. Includes 1 x TT922AF, 2 x TT644D, 1 x TT611DF and 1 x TT922HF. Compatible with all standard 1/2" connection recip saws.

Universal open-backed design for grout and mortar removal. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

Handy set of the most popular sizes for cutting wood and metal. Includes 3 x TT922AF, 4 x TT644D and 3 x TT1531L. Compatible with standard 1/2" connection recip saws.

Manufactured to EN847-1 and designed specifically for use with tracked plunge saws, these blades have a high tooth count for a superior finish. The CNC controlled, 4-face grind premium K10 tungsten carbide teeth provide a razor-sharp cutting edge for an enhanced finish and long cutting life. Ideal for use on laminates, hardwood, softwood, chipboard and composites. Select the correct tooth count and form for your application.

Tungsten carbide-tipped teeth and thin kerf. For use on hardwood, softwood, chipboard and composites. Max 3800rpm. 30mm bore. Compatible with all 300mm woodworking saws with a 16, 20, 25 or 30mm bore.

Tungsten carbide-tipped teeth and thin kerf. For use on hardwood, softwood, chipboard and composites. Max 7000rpm. 30mm bore. Compatible with all 165mm woodworking saws with a 30mm bore.

Universal open-backed design for use on plasterboard, wood, plastic and metal profiles. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

Plunge Track Saw Bag for use with the Plunge Track Saw TTS1400.

A complete kit that deserves pride of place in every workshop. The versatile and highly portable Plunge Track Saw TTS1400 is supplied with all the accessories needed to achieve the perfect cut. Includes TTS1400 Plunge Track Saw, Track Pack and Connectors, Plunge Track Saw Bag, and Work Clamps.

Key Features:

- Easy bevel adjustment for precise bevel cuts at angles 0 – 48°
- Scribe mode eliminates splintering and tear-out
- Variable speed, soft start and constant speed electronics optimises cutting conditions for every material
- Precise cutting depth adjusts to a maximum of 68mm
- Efficient dust extraction with universal vacuum system adaptor and 360° outlet
- Dual alignment cams fine-tune the fit between the saw and track for exact cuts
- Anti-kickback safety feature prevents the saw from jolting when performing plunge cuts
- Guide rail track lock adds stability when performing bevel cuts
- Easy change carbon brushes to further extend the product life-span

What's in the box?

- Triton 1400W Track Saw Kit 4pce 

Universal open-backed design for cutting of wall and floor tiles. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

Tungsten carbide-tipped teeth and thin kerf. For use on hardwood, softwood, chipboard and composites. Max 7000rpm. 20mm bore. Compatible with all 165mm construction saws with 20mm bore.

Easily accessible shaftlock aids fast, convenient blade-change. Plunge lock for safety enhancement. Soft-grip handles. Fits to guide track system for smooth, precise straight and bevel cutting. On-board tool storage. Variable speed with soft start and constant speed. Bevel range of 0-48°.

Key Features:

- Requires either the TTSTP track and/or the TTST1500 track for Saw operation. Tracks sold separately.
- Easily accessible shaft lock for fast blade-change
- Soft-grip handles for comfort & control and a Plunge lock for safety
- Universal vacuum system adaptor with 360 Degree rotational outlet
- Plunge lock for safety
- On-board tool storage

What's in the box?

- 1 x 165mm 60TCT saw blade
- 1 x Carbon brush (pair)



Module Boiler Ferroli nefa20ce 39803410



Quicky Plastic Pipe Saw 2 Hand Cable Saw 

Durable pipe saw/stainless-steel cable designed for cutting pipes in and around tight spaces.
 Suitable for cutting most plastic pipes.
Cuts up-to 4&#34; Diameter plastic pipe.

Outstanding value
Why not visit our e-bay shop. 
http://stores.ebay.co.uk/sptfast



Spare tungsten carbide-tipped (TCT) saw blade with 20 teeth for rapid and effective cutting of natural and man-made composite wood. Blade dia 110mm and bore size 22.2mm. Compatible with GMC Compact Plunge Saw (936962).

Hardened oval tubular frame with induction-hardened HCS blade. Raker tooth set for cutting green wood. Integrated grip and hand guard. Ideal for pruning, trimming and cutting of green wood.

Handy set of the most popular sizes for cutting wood and metal. Includes TT118A, 2 x TT118B, TT101B, TT101BR, TT101AO, TT101D, TT144D and 2 x TT244D. Compatible with bayonet fitting jigsaws.

Hardened teeth on 1.2mm blade. 7tpi for coarse cuts in green wood. Moulded grip for comfort and control. Protective rigid sheath with belt clip for ease of use and storage. Ideal for all pruning tasks.

Universal open-backed design with hook and loop abrasive system. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

High quality aluminium oxide abrasive with phenolic resin bonding agent. Heavy duty X-weight cloth backing for long life and high performance. Fully top-skived for reduced chatter and tear-resistance. Closed coat for high removal rate and smooth finish. Ideal for stripping, sanding and finishing of composites, wood, metal, paint and varnish.

High speed steel cutter for cutting and grout removal. For use on ceramics, tiles, stone, glass, plastics, fibreglass and wood. Compatible with most rotary tools including Silverline, GMC and Dremel. Working length 25mm. Mandrel 3.17mm. Max 28,000rpm.

Highly flexible, very thin blade with zero-set teeth that prevents marking of workpiece. For trimming dowels and other flush-cutting jobs.

Aluminium oxide with cloth backing for use with the Triton Portable Oscillating Spindle Sander TSPSP650. For use on wood, plastic, ferrous and non-ferrous metals, and most non-metallic materials. Includes sizes 13, 19, 26, and 38mm (1/2", 3/4", 1", and 1-1/2"). Length 76mm (3").

Universal open-backed design for use on all types of caulk and sealant. Compatible with tool-free, quick-change and standard multi-tool machines. Also compatible with Triton, GMC and Silverline Oscillating Multi-Tools, and with most leading brands.

High quality carbon steel blade with hardened steel teeth.  Precision tooth configuration for improved accuracy. Cuts hardwood and softwood. For use with Silverline Mitre Saw 550mm. 14 tpi. Length: 550mm.

High quality aluminium oxide abrasive with phenolic resin bonding agent. Heavy duty 120gsm hook and loop backing for strong connection and high performance. Closed coat for high removal rate and smooth finish. Ideal for stripping, sanding and finishing of composites, wood, metal, paint and varnish. Suitable for orbital and random orbit sanders.

General purpose set for popular applications. Includes 3 x 150mm HCS blades for straight, fine cuts in metal sheets and alloys (18tpi); 4 x 150mm HCS blades for fast cuts in wood and plastics (6tpi); and 3 x 240mm HCS blades for fast, rough cuts in green wood (5tpi). Compatible with all universal 1/2" shank recip and sabre saws.

Universal open-backed design. For use on plasterboard, wood, plastic & metal profiles. Compatible with Silverline, GMC and Triton Oscillating Multi-Tools, and also tool-free, quick-change, and standard multi tool machines.

Triton TWX7 Contractor Saw Module

Description

Location

Item lent by ToolRiffic

Other items from ToolRiffic

FAQs

Triton TWX7 Contractor Saw Module

Explore other options around London