Wolf 1200 Watt Router & Router Table Kit
Router: The Wolf 1200w Router is a versatile woodworking power tool. Make elaborate cuts, shapes, grooves and holes with the greatest of ease. With a smooth plunge depth of 52mm providing maximum control making this router a creative tool for carving and shaping. Robust materials and construction coupled with design and quality manufacturing make this machine a must for any existing or would be ca...rpenter. The body houses a strong 1200 watt 230 volt motor developing a no-load speed of 11,000 - 30,000 rpm. The on/off switch and operator present button in the handle to the right and with both right and left being perfectly situated gives the operator a comfortable working position allowing precise movement of the machine for detailed finishing. The body supports the rise and fall guide rods and includes a locking lever as well as adjustable depth stop control and gauge maximum plunge 52mm and variable to this depth. A spring assisted return feature raises the collet type chuck with bit from the work piece. The machine will take 3 sizes of Router bit i.e. 6mm, 8mm & ¼”. The base plate includes an insert to avoid damaging the work surface and a dust extraction port is supplied. A parallel guide and rods are included one of which with the Centre point can be used to draw/cut a curve,arc or circle. See also Router bit set and Router Table. Technical Specification:- Powerful 1200W variable speed motor- Supplied with: 6mm, 8mm and 1/4” collets- Parallel guide- Adjustable depth stop control and gauge- Plunge cutting depth: 52mm- No load speed: 11,000rpm-30,000rpm- Supplied with dust extraction port. Accessory Pack includes: 2 x Collets plus one fitted, Spanner (Collet Nut), Guide bush, Spare brush set, Centre Point. Router Table: The Wolf die cast aluminium Router Table converts your Router into a Spindle Moulder. The table is carefully cast, accurately machined and will take most routers with a base diameter of up to 155mm, and is mounted underneath by a system of bolts, nuts, washers and toggle straps which are adjustable to allow easy centralising of the router. Extension wings (supplied as standard) allow for those longer lengths of material to be handled comfortably. The four legs are drilled to make safe and easy fixing to a table, bench or baseboard. Power to your router is by way of plugging it into the 230v No-volt Release Switch with safety stop button. This enables the router switch to remain depressed by means of the trigger clamp supplied. The installed router bit protrudes through the table hole insert and is adjusted by the rise and fall mechanism on the router. For safety there is a spring loaded ‘see through’ guard to cover the router bit which pivots away as the material is fed through. Three moveable anti kick-back plates with sprung fingers allow the material to pass by the bit (rotating anti-clockwise) in the in-feed direction. The angle of the fingers avoids the material being ‘kick’ back fed towards the operator. A parallel side fence houses a dust extractor port and there is an adjustable guide which acts as a stop or support for ‘L’ shaped material. Full kit of fasteners, fixings and thumb-wheels together with Instructions to help with assembly is included. Size with extensions 860mm x 330mm, fits most routers with up to a 155mm base plate.
Read more about this item
Share this item, earn £10
Share this item with a friend to give them $20 towards buying it. We’ll also give you $10 credit when they do!