Wooden Camera Shoulder Rig (Premium Black Leather)

Modular shoulder rig based on ARRI standard dovetail and rosettes. Threaded holes on Shoulder Pad, Crossbar, and Handles for attaching accessories like monitors, rod clamps, cheeseplates, battery mounts, and more. Rosette Arms put the Handles out in front of your body for easy maneuvering. 

(2) Avenger 4.5in Grip Head w/Junior Pin

The Avenger D400 4.5" Grip Head with Junior Pin is designed to allow a Junior stand to support butterfly and overhead frames with its 4.5" grip head. The grip head has a Junior pin and receiver.

Joker Bug 800 W Head

Beamer PAR Reflector

25' Extension Cable

Power Supply (110V/240V, 50/60Hz)

Barndoors, HMI Lamp

Spare Bulb

Hard Carry Case

Four Lens Set, Lens Bag:
- Super Wide Flood
- Wide Flood
- Medium Flood
- Frosted Fresnel

Also Includes:
- Speed Ring
- Arri Lightweight Light Stand
- 25lb Sandbag

Joker Bug 400 W Head
Beamer PAR Reflector
25' Extension Cable
Power Supply (110V/240V, 50/60Hz)
Barndoors, HMI Lamp
Spare Bulb

Four Lens Set, Lens Bag:
- Super Wide Flood
- Wide Flood
- Medium Flood
- Frosted Fresnel

Also Includes:
- Speed Ring
- Arri Lightweight Light Stand
- 25lb Sandbag

- I am happy to go over all the pieces during check-out and build the camera with the renter if needed
- The entire kit fits into (3) 1510 Pelican Cases

MATTEBOX:
UMB-1 Universal Mattebox (Wooden Camera)

FOLLOW FOCUS:
Dual Sided Follow Focus (Shoot35)

TOUCH SCREEN & EVF:
5” Touchscreen Display w/Hoodman
Bomb EVF (LCOS)
- UVF Mount (Rod/NATO Rail)
- UVF Mount for EVF

15MM ROD COMPONENTS:
LW 15mm Bracket
15mm Rod Pair – 12″, 9″, 6″, 3″

POWER SOLUTION:
(1) C-Box (Converter, V-Mount) (Wooden Camera)
- HDMI and 3G HD-SDI inputs

ACCESSORIES:
NATO Top Handle kit (Plus, 100mm Rail)
Easy Top X
Side Plate (Right Front)
Side Plate (Right Rear)
+1 Adaptor Module
Quickplate Module
Quick Riser
Dovetail Clamp
Safety Dovetail (12”)
5″ Magic Arm (RED)
7″ Magic Arm (Wooden Camera)

OLPF:
Skin Tone
Low Light

AUDIO:
A-Box (Epic/Scarlet)

BATTERIES:
(5) Red Batteries + Charger & AC Power

MEDIA:
(2) 512 GB Mini Mags
- USB 3.0 Reader or eSATA Reader


(2) Matthews Drop Ceiling Scissor Clamp with Baby (5/8") Pin

The Matthews Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand.

2 x Joker-Bug 400W HMI Head
2 x 400W HMI SE Lamp for Joker
2 x Power Supply for Joker 400 (90-265V)
2 x Beamer PAR Reflector 
2 x 25' Extension Cable
2 x Frosted Fresnel Lens
2 x Super Wide Flood Lens
2 x  Medium Flood Lens
2 x Super Wide Flood Lens
2 x 4 Leaf Barndoor
2 x Beaker - Frosted Glass 
2 x Speed Ring Adapter for All Joker-Bug Lamp Heads
1 x Carrying Case - Joker Bug 400W 2 Kit

Also Includes:
2 x Arri Lightweight Light Stands
2 x 25lb Sandbags 

Specifications:
- Zero-latency (less than 1ms)
- Range: Up to 300ft/100m
- Signal Quality: Uncompressed, up to 1080p/60
- Input/Output: SDI 
- Power Input: 7-17v

Included accessories:
- 1 PTap to right-angle barrel power cable (18in/45cm) for transmitter
- 1 BNC cable (18in/45cm) 
- 1 Mini-USB to USB firmware cable (18in/45cm)
- Parallinx Ace Mounting Bracket

The BM090 is a lightweight color critical full HD resolution (1920x1080) 9" Multi-Format LCD monitor with 3G/Dual-Link/HD/SD-SDI and DVI-I Inputs.

Includes:
- V-Mount Plate
- AC/DC Power Adaptor 
- D-Tap to 4-Pin XLR Adaptor 
- Anti Reflective Clear Protective Cover

(2) Matthews Cardellini Clamp with 3" Center Jaw (Silver)

(2) Avenger Junior Wall Plates

The Avenger F300 Junior Wall Plate frees up floor space and allows you suspend a large light from a wall or ceiling. Alternately, you can nail it to the floor for very low angle illumination.

(2) 24"x36" Solid Flags

(1) 24"x36" Double Net

(1) 24"x36" Single Net

(1) 24"x36" Silk

(1) Advantage Flag Bag with Shoulder Strap

(2) Matthws 3in Baby Plates

This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included.

(2) Matthews Quaker Clamps

The Quacker Clamp from Matthews is also known as the duck bill or platypus clamp. It's an ideal solution for positioning foam core, reflector, or bead board.


(1) Matthews 8in C-Lamp with 2 Baby Pins

 Clamps made for mounting Baby Fixtures have 2 separate pins at different angles so that the light fixtures may fit with minimal clearance.

(1) Full Apple Box
(1) Half Apple Box
(1) Quarter Apple Box
(1) Eighth Apple Box

Full HD 7-inch LCD Monitor
The sharpest daylight viewable field monitor available
Input: SDI, HDMI
Output: SDI, HDMI 
Display: 7-inch, 1920x1080, 1000nits with anti-reflective coating
Compatible with both Canon & Sony Batteries
Light weight, great for use with any gimbal system

Includes:
- 8GB SD Card (Load 3D LUTS/Store Screen Grabs)
- D-Tap to LP-E6 Power adaptor 
- 24in Thin SDI Cable
- Protective Neoprene Sleeve

Mini Max will operate on a 105" maximum arc from 14' high to below the horizontal. Mini Max features two rocky mountain legs in the front and an adjustable main column leg for use on stairs or uneven terrain.

Mini Max can "fly" right in, making it possible to strategically place a Key or Back Light.

It can support a 25 lb fixture at a height of 9' (2.7 m) with a 9' (2.7 m) horizontal extension.

A 3:1 weight ratio is recommended for safe operation of Mini Max.


(2) Matthews Sky High Combo Steel Stand 750/2k (Baby/Jr.)

Each stand has a Rocky Mountain leg

(1) Arri T1 Fresnel with 4 leaf Barndoors
(1) 5 Piece scrim set (Scrim bag included)
(1) Spare 1k bulb

Each scrim set included: 2 doubles, 1 single, 1 half double, 1 half single


The RigWheels Passport Dolly provides rock solid support for 100 lb payloads and the travel is very smooth.

Included in the case:

- End-brackets 

- 75mm ball-head adapter 

- 100mm ball-head adapter 

- 150mm ball-head adapters 

- 6ft 3in of track collapse into 19in sections 

The sections of track connect seamlessly via threaded connectors and are constructed from high-grade aluminum for rigidity. 

The Kit also includes:

(2) Low Boy Combo Stands  

(2) 25b Sandbags

2 x 1000 Watt Household Lighting Dimmers/Squeezers

 (5) 20ft Singles with Male and Female Hubbles (12/3 AWG)

(2) 300 Watt Tungsten Fresnels with 4 leaf Barndoors

(2) 5 Piece scrim set for 300W Fresnels 

- Each scrim set includes: 2 doubles, 1 single, 1 half double, 1 half single

(2) Scrim Bags

(2) Lightweight Arri Light Stands

(2) 25lb Sandbags

(2) Spare 300 Watt Lamps

UMB-1 Universal Mattebox (Pro) is natively 15mm LW rod based

Included Components:

- Swing Away Bracket

- 15mm Rod Clamp

- 2x rotating 4x5.65 filter stages

- Folding French flag

- 143mm rubber bellows with 138mm round filter slot

- Swing away insert set

- NATO standard accessory rails on left, right, & top

- Clamp on adapter set

- Universal cloth donut

- Left and right side flags

- Bottom flag

Included Reduction Rings:

80mm

87mm

95mm

104mm

110mm

Included Clamp On Adapters:

80mm

87mm

95mm

104mm

110mm

114mm

125mm

134mm

136mm

The Avenger H1200M 12 x 12' Modular Overhead Frame is comprised of heavy duty 0.11 thick square section tube that slot and pin locked together, rapidly providing a stable frame for silks, scrims, etc. By reducing or adding tubes you can vary the frame size. The unit has Ear Type 2 frame support for stand mounting.

(2) Matthews Low Boy Combo Stand 750/2k (Baby/Jr.)

Each stand has a Rocky Mountain Leg


(1) ETC Source Four 750W Leko

(1) Gell Frame

(1) ETC Pattern Holder Size "B" 

(1) Pipe Clamp

(1) Spare Bulb

Note:

Available in 26˚, 36˚, &  50˚ Lens Tubes

Various Gobo patterns also available upon request

Matthews 40in Double Riser C-Stands 
Matthews 40in Arm and Grip Head included with each C- Stand 

(2) 300 Watt Tungsten Fresnels with 4 leaf Barndoors

(2) 650 Watt Tungsten Fresnels with 4 leaf Barndoors

(2) 5 Piece scrim set for 300W Fresnels (Scrim bag included)

- Each scrim set includes: 2 doubles, 1 single, 1 half double, 1 half single

(2) 5 Piece scrim set for 650W Fresnels (Scrim bag included)

- Each scrim set includes: 2 doubles, 1 single, 1 half double, 1 half single

(1) Spare 300 Watt Lamp

(1) Spare 650 Watt Lamp

(4) Lightweight Arri Light Stands

* Optional Heavy Duty rolling case

(5) 50ft Singles with Male and Female Hubbles (12/3 AWG)

(2) 650 Watt Tungsten Fresnels with 4 leaf Barndoors

(2) 5 Piece scrim set for 650W Fresnels 

- Each scrim set includes: 2 doubles, 1 single, 1 half double, 1 half single

(2) Scrim Bags

(2) Lightweight Arri Light Stands

(2) 25lb Sandbags

(2) Spare 650 Watt Lamps


(6) 25lb Impact Sandbags 
- Rugged and Durable 

Included are a:
Glidecam Tru-Horizon electronic stabilizer.
Acebil QRSS Sliding Quick Release Assembly (Small),
Revo SR-1000 Shoulder Support Rig.
THIS IS ALL YOU NEED TO GET THE PERFECT STEADY SHOT.  

SEE OUR CAMERAS AND ACCESSORIES to make your ultimate run and gun indie producer kit. We have a Panasonic GH4 camera, and a Panasonic FZ2500 camera. We have a prime ultrawide 7-14 zoom lens available for rent as well.  We have an Ultrazoom wide to telephoto 14-140 lens. m4/3.  We also have a lav mic system, a Zoom Pro audio recorder, a shoulder mount, electronic stabilizer, and GH4 camera. Several accessories available; see our inventory.

Shoulder Rig for Canon C100, 300 and 500.

Note: Camera NOT INLCUDED

Description:

Compatible with Canon Nikon Sony and Other DSLR cameras.

1/4" mounting holes for attaching other accessories.

Ideal for professional or amateur cameraman/filmmaker.

Portable and lightweight, convenient for you to carry while travelling.

Top Handle Grip:

Rubber Top Handle Grip is adjustable in height along several points on the vertical bracket and can be mounted in either forward or reverse.

A perfect accessory for those great low angle shots.

Two 1/4" mounting screws included.

Video Cage:

Made of aluminium alloy, durable and built to last.

Two rubber coated side handles make it comfortable for you to hold and spread apart for stabilization.

Easy to assemble and disassemble, convenient for you to carry while travelling.

The top black anodized metal bracket has (14) 1/4-20 threaded holes and (9) 1/4" holes for mounting a variety of hot shoe adapters, mini ball heads.

The bottom black anodized metal bracket has (5) 1/4-20 threaded mounts available underneath to attach a quick release plate.

Specifications:

Material: Aluminium Alloy and Rubber

Color: Red + Black

Package Contents:

1x Top Handle Grip

1x Camera Video Cage

1x Shoe Mount

2x 15mm Rod

2x Wrench

4x 1/4" Screw

Awesome gimbal. Smooth camera movement and long battery life. Comes with little tripod legs so you can set it down easily.

$42/day

Message me with any questions and I'll try to respond quickly.

HATCH rig for Phantom Miro from SHOOT-VR.com
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available for Alexa mini & Red Epic Dragon arrays, as well as smaller non-synchronized cameras like A7S & Canon DSLR

HATCH rig for Red Dragon from SHOOT-VR.COM
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available Alexa mini & Phantom Miro arrays, as well as for smaller non-synchronized cameras like A7S & Canon DSLR

HATCH rig for Alexa mini from SHOOT-VR.COM
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available for Red Epic Dragon & Phantom Miro arrays, as well as smaller non-synchronized cameras like A7S & Canon DSLR

KIT INCLUDES:

- Gimbal
- Hard Case
- Battery Charger
- 2x Batteries
- Quick Release Plate
- Screws
- User Manual


The DJI Ronin S is a motorized video gimbal for DSLRs and mirrorless cameras in professional settings and workflows. Holds cameras up to 8lbs. Customizable timbale to however you wish to operate it. Battery lasts up to 12 hours on a single charge: 

Feiyutech A1000 3-axis camera gimbal. Suitable for any camera rig weighing up to 1000 grams. The gimbal comes in a carry bag that includes a separate battery charger, and four batteries, allowing you to charge one set whilst you use the other. Connect to the gimbal via the iOS or Android app to activate remote pan and tilt, or to program in long, complex movements for timelapse or rehearsed shots.

The gimbal is great for cinematic-looking tracking and panning shots on a budget, or a great alternative to a tripod or monopod.

amazing hand held gimbal great for smooth and steady cinematography 
very easy to use 



Zhiyun-Tech Dual Handle for Crane-2 Stabilizer

Included:
- Zhiyun Crane 2 3-Axis Gimbal Stabilizer
- Batteries (2 Sets!)
- Charger with cable and power adapter
- Follow Focus Wires for Canon, Sony, and Panasonic
- Zhiyun Dual Handle Grip
- Case 

3-Axis Gimbal Stabilizer for Mirrorless Camera and DSLR for Sony A7 Panasonic LUMIX Nikon J Canon M

The zhiyun Crane V2 classical model is suitable for mirrorless camera and DSLR between 0.77 lb and 3.96 lb like Canon M series, Nikon J Series, Sony a7 and Panasonic Lumix.
Built-in compact slip rings enable the Crane V2 gimbal to have all 3 axes 360 degrees unlimited rotation, which is controlled by joystick or gesture and powered by 3 x 32-Bit mcus.
Smooth, steady and noiseless videos with app & wireless remote control, including applications such as time lapse, long exposure, low angle filming, etc.
Balance your camera well on the 3-axis camera stabilizer at the initial position which just costs one minute. You can set the parameters such as follow speed and motor strength through “zy play” app (iOS/ Android).

KIT INCLUDES :

- 4 x Tilta Extension Arm with ARRI Rosette
- 2 x Wooden Camera Handgrip (Left / Right) with ARRI Rosette

This is a Moza Air 3-Axis Motorized Gimbal Stabilizer. Rental package includes:

Moza Air 3-Axis Motorized Gimbal Stabilizer
Handgrip
3 x 26350 Battery
Charger
Lens Support
1/4"-20 Screw
USB Cable
Camera Control Cable (Canon, Panasonic, NO SONY)
ARCA-SWISS Converter
Quick Release Plate
Carry Case

Item Includes:
-Shape Adjustable Shoulder Pad
-Shape Handle w/ Rod Block
-Shape/Zacuto C300 Handle Adapter
-Shape Weight

Check out https://www.ready-rig.com/ for more info. Basically takes the weight of your gimbal from your arms to your back and hips. You can operate Gimbal all day, takes the natural bounce from your arms out of the shot and smooths out the move.

the great gimbal RONIN-S perfect pairing with any DSLR or mirrorless. 

DJI ronin 2 gimbal for cams up to 30 lbs, Teradek RT wireless focus kit including thumbwheel, and Ready Rig with Pro arms to take the weight off your arms.

Genus shoulder rig with Matt Box inclucluding 2x filter holders and 0.8 Follow Focus.

Used as Stabilizer- Gimbal up and down adjustable, QR plate left and right adjustable, QR plate front and rear adjustable, 16pcs weights for adjusting the balance and anti-shock, ideal for family video recording, wedding recording, TV making, film recording etc

Purchased 3months ago, used on one shoot and no longer have a need for it. Pristine condition, perfect video + picture resolution. All motors, pans and tilts work flawlessly. Package includes all of the extras that I purchased for it including an extension rod, microphone, phone mount (for use with the DJI app which enables you to use your phone as a viewing monitor), single battery and protective carrying case. 

Description below:
The Osmo system from DJI combines the Zenmuse X3 camera/gimbal with a detachable handle, bringing the benefits of stabilized 4K shooting to a handheld form factor. The camera features a 1/2.3" CMOS sensor that enables up to full DCI 4K (4096 x 2160) video recording at 24 or 25p as well as 12MP photo capability. Basic controls for the camera and gimbal are provided on the handle itself, including a joystick for manual pan and tilt. For monitoring and more advanced operation, there is a Wi-Fi link allowing Osmo to be tethered to a mobile device running the DJI GO iOS and Android app. An included smartphone holder effectively turns your smartphone into an on-board monitor. The Wi-Fi features a range of up to 85', so you can operate the camera and gimbal remotely as well.

Video Resolutions and Framerates
4K:
4096 x 2160 (DCI): 24p, 25p
3840 x 2160 (UHD): 24p, 25p, 30p

FHD (1080p):
1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p, 120p

HD (720p):
1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

Maximum Bitrate: 60 Mb/s

DJI Osmo X3/FC350H 12.76MP Handheld 4K Camera
ZENMUSE X3 Gimbal
Handle
Wi-Fi Video Link
Phone Holder
2 xHB01-522365 Intelligent Battery
SOY015A-1260120 Battery Charger
Osmo Carry Case
16GB microSDHC Card
Wrist Strap
Shoulder Strap
UV Filter
Lens Cap

Sony’s amazing mirrorless camsra and great equipment to capture with style and precision. Use my Gimbal and Sony today for your project and witness the amazing art of photography and videography first hand with the newest Gimbal and necessary attatchments!


DJI Ronin Stabilisers Gimbals for DSLR, Blackmagic Camera, Red etc  Come with thumb controller, remote control, trunk and everything.  
Located in Jersey City. 


This cage kit, works with Canon 5D Mark III, 5D Mark IV, 5Ds, 5Dsr (Camera Not Included)
The parts can be reconfigured, and without the cage the follow focus can work with any other camera (6D, 6D markII, 7D, Sony A7s etc)

Includes: 
- Canon 5D Cage with top handle and 2 cold shoe mounts for monitors etc. 
- Follow Focus 
- 1 x adjustable follow focus lens ring 
- 1 x 15mm rod 1' 
- 1 x Cheeseplate 
- 1 x DSLR 15mm rod plate 
- Hex Tools

1x Easy Rig
1x Easy Rig Belt Pouch
1x Carrying Bag

Capacity:	4kg (9lbs) in steps to 25 kg (55 lbs)

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system. The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. It works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

Owner Notes: 
Body mounted support system that lets your camera rig perform horizontal, vertical and panning movements with stability and comfort. 
Storage bag, 
Powerful suspension line supports cameras up to 17.6 - 22 lb; also keeps your setup safe & gives hands free operation 
Adjustable support bar enables you to adjust the height of the support arm according to your requirement Includes 
Ventilated soft padded vest relieves your shoulders and back from strain, vest has adjustable features to fit different sizes Powerful

Condition: New 
Replacement value: $1,000.00 

Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.

Easy to hold in one hand so you can focus better on your subject with the easy-to-control focus wheel.
Create professional and smooth videos and camera shots with the ronin-s stabilizer when you are on the move.
Smoothtrack technology allows you to transfer from motion to camera angle with one hand. Switch between three user profiles with a simple click.
Compatible with most DSLR and mirrorless cameras including Sony A7 series, Canon 5D/6D/7D/60D/70D/80D series, Nikon D5/3/850/750/700/5000 series/7000 series, Panasonic GH5/GH5s and more.

MOZA Air 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera, with Moza Thumb Controller and Dual Handle, Auto-tuning Mimic Control, i.e. Sony A7, Panasonic GH5, Canon 5D

3-axis stabilized gimbal system Supports a wide range of cameras and lens (up to 16 lbs.). Simple 5-minute setup & tool-free balance The battery life is rated upto 4 hours. The gimbal will hold up to 16-pound camera, so if you use a very heavy camera like this, the gimbal motors must work very hard and battery life will be 1 hour or less. If you use light camera like EOS Rebel, battery life will be full 4 hours. Built-in receiver and remote control available with Bluetooth via the DJI Assistant for iOS 3 operation modes for maximum flexibility Includes: ronin smart battery  battery charger stand  carrying case thumb control thumb control charger thumb control mount remote control remote control charger  tools instruction manuals camera mounting plate mounting hardware

DJI Ronin -S, All Original Accessories.  The most amazing compact gimbal on the market! 

This gimbal is specifically designed for smaller mirrorless cameras like the Sony a7 series. I've used it with my a7sii and found it's max weight tops out when attaching a 24-70 lens. Any lens heavier than that and it probably won't function as smoothly or efficiently. Other than that the stabilization is great.

One handed gimbal, holds up to 8 pounds. 
This Package includes:

Ronin-S
Plate
2 Batterie's
Stand
USB-C charger

 Comes with remote, two batteries, Charger and a carrying book bag 

Looking for a cheaper way to create high quality videos?
A cheaper alternative stabilizer is here to help you!

The ultralight MOZA AirCross 3-Axis Motorized Gimbal Stabilizer is designed to stabilize handheld capture with your mirrorless camera, producing smooth, professional-looking footage. The AirCross supports up to a 4-pound payload, and features a universal quick release system compatible with both Manfrotto 501PL and Arca-type plates. Create eye-catching time-lapse shots using the downloadable MOZA app. The integrated, two-button handgrip control provides directional control and mode selection at your fingertips. Multiple operating choices include inverted, re-center, and four follow modes.

Rechargeable 2000mAh batteries provide up to 12 hours of operation, and the AirCross features two additional power options to help you avoid running out of camera and gimbal power over long shooting days. The first is a DC output port for connecting to your Sony or Panasonic battery dummy, extending your camera's run-time. The second is a 12.6 VDC input on the handgrip for attaching a third-party power bank to replenish gimbal power while shooting.

Additional control options include using the MOZA smartphone app, or the separately available Wireless Thumb Controller. An auto-tuning function available through the app saves time and ensures optimal performance.

This rig makes it easy to move from tripod to handheld in seconds with an integrated VCT plate. It can also supply power to all your p-tap accessories, including your camera if we have the cable for it (ask us!) . Lastly it makes for steady focusing with a Nucleus Nano wireless focus system, letting the operator change focus from the handgrip (or an AC can use the included handwheel).  

V-mount batteries and SmallHD monitor not included, but you can rent ours!

Great stabilizer for small DSLR cameras with a lower payload.

(Can also meet in Manhattan depending on time and day)

Camera Shoulder Rig

Description

Location

Item lent by Ashton

Other items from Ashton

FAQs

Camera Shoulder Rig

Explore other options around New York