Speed Rail Side Door Mount

Kit Includes:

(4) Door Hooks w/ 3/8"-16 Male Thread

(4) 2" / 3" / 5" 1 1/4" Speed Rail Starters

(1) 10"x 14"x 3/8" Cheeseplate w/ 1 1/4" SR Slider Brackets

(4) Gutter Hooks & Fender Hooks

(4) 12' Hook Ratchet Straps / 16' Endless Ratchet Straps

LOAD CAPACITY OF 190LBS.

VERY QUIET TRACKS SO YOU CAN EASILY RECORD SOUND.

MADE FROM SOLID BILLET ALUMINUM

3/8''-16 THREADED HOLES EVERY 2" ALONG THE SIDES/BOTTOM AND 9 HOLES AT EACH END, MAKES FOR EASY SECURING AND RIGGING OPTIONS

4 RARE EARTH MAGNETIC STOPPERS ON EITHER ENDS FOR SOFT STOPS

INCLUDED IN PACKAGE: 4 3/8"-16 BABY PINS, "NUT BUSTER" AND TRAVEL CASE



LOAD CAPACITY OF 190LBS.

VERY QUIET TRACKS SO YOU CAN EASILY RECORD SOUND.

MADE FROM SOLID BILLET ALUMINUM

3/8''-16 THREADED HOLES EVERY 2" ALONG THE SIDES/BOTTOM AND 9 HOLES AT EACH END, MAKES FOR EASY SECURING AND RIGGING OPTIONS

4 RARE EARTH MAGNETIC STOPPERS ON EITHER ENDS FOR SOFT STOPS

INCLUDED IN PACKAGE: 4 3/8"-16 BABY PINS, "NUT BUSTER" AND TRAVEL CASE

UPON REQUEST: 75MM & 100MM BALL ADAPTERS

Kit Includes:

(2) Leveling Legs

(1) 10"x14"x3/8" Cheese Plate w/ 1 1/4" SR Slider Brackets 

(4/each): Gutter & Fender Hooks / D-Ring Extensions / 12' Hook Ratchet Straps / 16' Endless Ratchet Straps

(2) 6ft 1 1/4" Speed Rail

SAIL VIDEO SYSTEMS 3RD PERSON VIEW PRO BODYCAM/SNORRICAM KIT 

The 3rdPersonView 3pvX2 PRO provides maximum stability on a low profile Snorricam. It has a wide range of uses from filmmaking to action sports to 360 degree video. 

The Straight Camera Pole has a male 3/8"-16 thread that will let you connect high end 360 camera rigs, like GoPro OMNI, Freedom360 and Freedom Explorer mounts.

-Lightweight SNORRICAM that can easily fit under costumes
-Ability to mount a camera 360° on a person with little to no movement
-Ideal for mid-to-lightweight cameras (GoPros, BlackMagic, DSLR)

Kit Includes:

(1) Ball Leveling Head

(4) Gutter Hooks 

(2) 12' Hook Ratchet Straps / 16' Endless Ratchet Straps

(1) Sound Blanket

Shooting professionally stabilized video has never been simpler and the Ronin offers a way to get Steadicam quality shots for a fraction of the budget. This rig works for cameras up to 16 pounds, and sports three different modes of arranging the rig for maximum maneuverablility. And for those really tough shots, there's always the option of adding a second operator on the blue tooth controlled remote.

Owner Notes: 
Has been field tested and is an excellent way to stabilize your shots! Great for filmmakers! 
http://www.dji.com/ronin?site=brandsite&from=nav

Includes full Ronin Package. 
Full Sized Ronin camera gimbal 
Battery x1 
charger x1 
Remote controller for 2nd hand operator X1 
Original packaging (DJI Pelican Case) to make carrying and storing the Ronin easy and simple.

Simple to Operate 
Light Weight Durable Construction 
Works with DSLR's and Mirrorless Cameras between 1.5 to 3.7lbs 
Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless Cameras 
Lithium Battery Powered- Low Maintenance, Eco-Friendly 
Illuminated ON-OFF Switch/Battery Indicator 
3/8"-16 Tripod Mount Socket

Shooting professionally stabilized video has never been simpler and the Ronin-M offers a way to get Steadicam quality shots for a fraction of the budget. This rig works for cameras up to 8 pounds, and sports three different modes of arranging the rig for maximum maneuverablility. And for those really tough shots, there's always the option of adding a second operator on the blue tooth controlled remote.

Easy to hold in one hand so you can focus better on your subject with the easy-to-control focus wheel.
Create professional and smooth videos and camera shots with the ronin-s stabilizer when you are on the move.
Smoothtrack technology allows you to transfer from motion to camera angle with one hand. Switch between three user profiles with a simple click.
Compatible with most DSLR and mirrorless cameras including Sony A7 series, Canon 5D/6D/7D/60D/70D/80D series, Nikon D5/3/850/750/700/5000 series/7000 series, Panasonic GH5/GH5s and more.

Useful for documentaries, news, events, and more, the Easyrig Minimax is great for situations which require extensive handheld camera work with cameras weighing from 4.4 to 15.4 pounds. Rather than uncomfortably handholding your camera, supporting the weight with your arms, the Minimax redistributes the weight of your camera setup through the body harness. Taking the weight off your arms lets you hold the camera steady for longer periods of time without fatigue. An added bonus of the Minimax is increased stability in your shots. The support rope, while transferring the weight to the harness, also adds a point of contact, reducing vibrations.

Feiyutech A1000 3-axis camera gimbal. Suitable for any camera rig weighing up to 1000 grams. The gimbal comes in a carry bag that includes a separate battery charger, and four batteries, allowing you to charge one set whilst you use the other. Connect to the gimbal via the iOS or Android app to activate remote pan and tilt, or to program in long, complex movements for timelapse or rehearsed shots.

The gimbal is great for cinematic-looking tracking and panning shots on a budget, or a great alternative to a tripod or monopod.

Included are a:
Glidecam Tru-Horizon electronic stabilizer.
Acebil QRSS Sliding Quick Release Assembly (Small),
Revo SR-1000 Shoulder Support Rig.
THIS IS ALL YOU NEED TO GET THE PERFECT STEADY SHOT.  

SEE OUR CAMERAS AND ACCESSORIES to make your ultimate run and gun indie producer kit. We have a Panasonic GH4 camera, and a Panasonic FZ2500 camera. We have a prime ultrawide 7-14 zoom lens available for rent as well.  We have an Ultrazoom wide to telephoto 14-140 lens. m4/3.  We also have a lav mic system, a Zoom Pro audio recorder, a shoulder mount, electronic stabilizer, and GH4 camera. Several accessories available; see our inventory.

1x Easy Rig
1x Easy Rig Belt Pouch
1x Carrying Bag

Capacity:	4kg (9lbs) in steps to 25 kg (55 lbs)

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system. The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. It works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

DJI Ronin -S, All Original Accessories.  The most amazing compact gimbal on the market! 

amazing hand held gimbal great for smooth and steady cinematography 
very easy to use 



Check out https://www.ready-rig.com/ for more info. Basically takes the weight of your gimbal from your arms to your back and hips. You can operate Gimbal all day, takes the natural bounce from your arms out of the shot and smooths out the move.

Just purchased in January 2017. 

Two batteries, should last you the whole day if you're balanced correctly.


Item Includes:
-Shape Adjustable Shoulder Pad
-Shape Handle w/ Rod Block
-Shape/Zacuto C300 Handle Adapter
-Shape Weight

Looking for a cheaper way to create high quality videos?
A cheaper alternative stabilizer is here to help you!

The ultralight MOZA AirCross 3-Axis Motorized Gimbal Stabilizer is designed to stabilize handheld capture with your mirrorless camera, producing smooth, professional-looking footage. The AirCross supports up to a 4-pound payload, and features a universal quick release system compatible with both Manfrotto 501PL and Arca-type plates. Create eye-catching time-lapse shots using the downloadable MOZA app. The integrated, two-button handgrip control provides directional control and mode selection at your fingertips. Multiple operating choices include inverted, re-center, and four follow modes.

Rechargeable 2000mAh batteries provide up to 12 hours of operation, and the AirCross features two additional power options to help you avoid running out of camera and gimbal power over long shooting days. The first is a DC output port for connecting to your Sony or Panasonic battery dummy, extending your camera's run-time. The second is a 12.6 VDC input on the handgrip for attaching a third-party power bank to replenish gimbal power while shooting.

Additional control options include using the MOZA smartphone app, or the separately available Wireless Thumb Controller. An auto-tuning function available through the app saves time and ensures optimal performance.

KIT INCLUDES:

- Gimbal
- Hard Case
- Battery Charger
- 2x Batteries
- Quick Release Plate
- Screws
- User Manual


Ronin-S with Key Accessories
8 lb Payload
Trigger and Mode Control Buttons
Offset Roll Motor for Screen Visibility
12-Hour Operation on Single Charge
Additional Functions via Android/iOS App
360° Pan, 280° Tilt, 360° Roll Rotation
Time-Lapse and Motion-Lapse
Advanced 32-Bit ARM Processor
Support for 2.4/5.8 GHz Receivers

Ronin-S with Key Accessories
8 lb Payload
Trigger and Mode Control Buttons
Offset Roll Motor for Screen Visibility
12-Hour Operation on Single Charge
Additional Functions via Android/iOS App
360° Pan, 280° Tilt, 360° Roll Rotation
Time-Lapse and Motion-Lapse
Advanced 32-Bit ARM Processor
Support for 2.4/5.8 GHz Receivers


------------------
FOCUS 5" On-Camera Monitor
Sun Hood for FOCUS 5" On-Camera Monitor
Flexible Matte Screen Protector
SmallHD 1 L-Series Battery
Microfiber Cleaning Cloth

The DJI Ronin S is a motorized video gimbal for DSLRs and mirrorless cameras in professional settings and workflows. Holds cameras up to 8lbs. Customizable timbale to however you wish to operate it. Battery lasts up to 12 hours on a single charge: 

DJI ronin 2 gimbal for cams up to 30 lbs, Teradek RT wireless focus kit including thumbwheel, and Ready Rig with Pro arms to take the weight off your arms.

DJI Osmo X3/FC350H 12.76MP Handheld 4K Camera
ZENMUSE X3 Gimbal
Handle
Wi-Fi Video Link
Phone Holder
2 xHB01-522365 Intelligent Battery
SOY015A-1260120 Battery Charger
Osmo Carry Case
16GB microSDHC Card
Wrist Strap
Shoulder Strap
UV Filter
Lens Cap

Note: Camera NOT INLCUDED

Description:

Compatible with Canon Nikon Sony and Other DSLR cameras.

1/4" mounting holes for attaching other accessories.

Ideal for professional or amateur cameraman/filmmaker.

Portable and lightweight, convenient for you to carry while travelling.

Top Handle Grip:

Rubber Top Handle Grip is adjustable in height along several points on the vertical bracket and can be mounted in either forward or reverse.

A perfect accessory for those great low angle shots.

Two 1/4" mounting screws included.

Video Cage:

Made of aluminium alloy, durable and built to last.

Two rubber coated side handles make it comfortable for you to hold and spread apart for stabilization.

Easy to assemble and disassemble, convenient for you to carry while travelling.

The top black anodized metal bracket has (14) 1/4-20 threaded holes and (9) 1/4" holes for mounting a variety of hot shoe adapters, mini ball heads.

The bottom black anodized metal bracket has (5) 1/4-20 threaded mounts available underneath to attach a quick release plate.

Specifications:

Material: Aluminium Alloy and Rubber

Color: Red + Black

Package Contents:

1x Top Handle Grip

1x Camera Video Cage

1x Shoe Mount

2x 15mm Rod

2x Wrench

4x 1/4" Screw

Genus shoulder rig with Matt Box inclucluding 2x filter holders and 0.8 Follow Focus.

Really nice gimbal. Everything is in the box with an extra extension arm on which you can put monitor or some other stuff. I also have a Sony A7rii camera available. They make a good match.

This gimbal is specifically designed for smaller mirrorless cameras like the Sony a7 series. I've used it with my a7sii and found it's max weight tops out when attaching a 24-70 lens. Any lens heavier than that and it probably won't function as smoothly or efficiently. Other than that the stabilization is great.

Awesome gimbal. Smooth camera movement and long battery life. Comes with little tripod legs so you can set it down easily.

$42/day

Message me with any questions and I'll try to respond quickly.

HATCH rig for Phantom Miro from SHOOT-VR.com
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available for Alexa mini & Red Epic Dragon arrays, as well as smaller non-synchronized cameras like A7S & Canon DSLR

HATCH rig for Red Dragon from SHOOT-VR.COM
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available Alexa mini & Phantom Miro arrays, as well as for smaller non-synchronized cameras like A7S & Canon DSLR

HATCH rig for Alexa mini from SHOOT-VR.COM
Our custom “HATCH” multicam rigs are designed for capturing 360 video with optimal image quality using an array of high-end cinema cameras & lenses. The rig supports 4-5 cameras for 2D, or 8-9 cameras for 3D, for up to a 360x150 view (a “hatch” in the top and/or bottom). Rates listed are starter 2D packages with 4 cameras. Rates double for 3D, and may increase based on lens choice. HATCH rigs also available for Red Epic Dragon & Phantom Miro arrays, as well as smaller non-synchronized cameras like A7S & Canon DSLR

Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.

Shoulder Rig for Canon C100, 300 and 500.

Included:
- Zhiyun Crane 2 3-Axis Gimbal Stabilizer
- Batteries (2 Sets!)
- Charger with cable and power adapter
- Follow Focus Wires for Canon, Sony, and Panasonic
- Zhiyun Dual Handle Grip
- Follow Focus Motor
- Support Rod
- 2x Follow Focus ring
- 1 ZW-Micro-004 Data Cable (For the FF)
- Allen Key

(lens is not included)

Zhiyun-Tech Dual Handle for Crane-2 Stabilizer

Included:
- Zhiyun Crane 2 3-Axis Gimbal Stabilizer
- Batteries (2 Sets!)
- Charger with cable and power adapter
- Follow Focus Wires for Canon, Sony, and Panasonic
- Zhiyun Dual Handle Grip
- Case 

3-Axis Gimbal Stabilizer for Mirrorless Camera and DSLR for Sony A7 Panasonic LUMIX Nikon J Canon M

The zhiyun Crane V2 classical model is suitable for mirrorless camera and DSLR between 0.77 lb and 3.96 lb like Canon M series, Nikon J Series, Sony a7 and Panasonic Lumix.
Built-in compact slip rings enable the Crane V2 gimbal to have all 3 axes 360 degrees unlimited rotation, which is controlled by joystick or gesture and powered by 3 x 32-Bit mcus.
Smooth, steady and noiseless videos with app & wireless remote control, including applications such as time lapse, long exposure, low angle filming, etc.
Balance your camera well on the 3-axis camera stabilizer at the initial position which just costs one minute. You can set the parameters such as follow speed and motor strength through “zy play” app (iOS/ Android).

This rig makes it easy to move from tripod to handheld in seconds with an integrated VCT plate. It can also supply power to all your p-tap accessories, including your camera if we have the cable for it (ask us!) . Lastly it makes for steady focusing with a Nucleus Nano wireless focus system, letting the operator change focus from the handgrip (or an AC can use the included handwheel).  

V-mount batteries and SmallHD monitor not included, but you can rent ours!

Purchased 3months ago, used on one shoot and no longer have a need for it. Pristine condition, perfect video + picture resolution. All motors, pans and tilts work flawlessly. Package includes all of the extras that I purchased for it including an extension rod, microphone, phone mount (for use with the DJI app which enables you to use your phone as a viewing monitor), single battery and protective carrying case. 

Description below:
The Osmo system from DJI combines the Zenmuse X3 camera/gimbal with a detachable handle, bringing the benefits of stabilized 4K shooting to a handheld form factor. The camera features a 1/2.3" CMOS sensor that enables up to full DCI 4K (4096 x 2160) video recording at 24 or 25p as well as 12MP photo capability. Basic controls for the camera and gimbal are provided on the handle itself, including a joystick for manual pan and tilt. For monitoring and more advanced operation, there is a Wi-Fi link allowing Osmo to be tethered to a mobile device running the DJI GO iOS and Android app. An included smartphone holder effectively turns your smartphone into an on-board monitor. The Wi-Fi features a range of up to 85', so you can operate the camera and gimbal remotely as well.

Video Resolutions and Framerates
4K:
4096 x 2160 (DCI): 24p, 25p
3840 x 2160 (UHD): 24p, 25p, 30p

FHD (1080p):
1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p, 120p

HD (720p):
1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

Maximum Bitrate: 60 Mb/s

EasyRig Vario 5 

11 to 38 lb Load Capacity • Reduces Strain on Arms, Neck & Shoulders • Adjustable Line Tension • Gimbal Rig Vest • 5" Extended Arm • Carrying Case

Great rig fto put your camera on , use Sony VCT locking mechanism

Speed Rail Door Rigging

Description

Location

Item lent by Men In Capes

Other items from Men In Capes

FAQs

Speed Rail Door Rigging

Explore other options around Queens