Neewer Spider Stabiliser operates with no batteries to still achieve smooth footage. It is handy and compact.

It offers great use on set, when travelling as it comes in a case and is quick and easy to find the balance. 

1x power from cable soft box lights

Comes with:
1 stands
1 soft box covers
1x bulbs
adjustable at height 

One level of brightness only.



DJI-M Ronin Gimbal gives really stable footage. You can mount your camera on to the mount plate, switch on the battery in the ronin and you're all set to go!

This comes with 1x battery, ronin Stand, gimbal and hand controller.

Neewer Lighting panel adjusts warmth and brightness!

This comes with a power lead that can be plugged into the mains and comes with 2 Batteries if you wish to use it without mains power.

It comes in the bag ready to go! Very handy to light certain scenes indoors and outdoors!

Lighting Gels are a great use to help enhance the tone of your lighting.

This goes great with the newer LED lighting panel as you get to adjust the warmth and brightness of each tone of gel.

Blue allows to find a coolness and the orange allows a warmth. Both are great to work with in post editing.

Neewer Slider add's an effective dolly effect to your shots. 

Smooth footage achieved. This can be mounted to a tripod.

TARION TR-SD80 80cm 31" Track Slider Stabilizer Stabilization System with Portable Case for DSLR Video Camera Camcorder Canon Nikon

Adopts 4 adjustable low-resistance roller bearings, higher load-bearing, more smooth and stable. Equipped with standard ARCA SWISS groove, perfect for being directly installed on ball head, no quick-release plate needed.
Scientific and unique design on both ends, block the slide plate and prevent it from impact and scratch. Upgraded ends design bring a maximum use of the track length.
Integrated brake screw design, more efficient and can decrease friction. A rubber pad part on slide plate, anti-slip and shock resistant.
Slide plate support both 1/4" and 3/8" interface for versatile usage. Extra 1/4" and 3/8" interface on both ends, easily fixed on tripods.
Adjustable feet for ideal shooting height.

Twice as original sliding distance, conceptionally retractable.
50cm track, 100cm actual sliding distance, load up to 8kg.
Super smooth transporting belt and track design.
Qualified aviation aluminum alloy, CNC technics, preciser and more stable.
1/4" and 3/8" screws built-in the top for connecting with camera or ball-head.
1/4" and 3/8" thread holes built-in the bottom for connecting with tripod.
Built-in gradienter helps you find the balance quickly.

Neewer 47.2 inches/120 centimeters Aluminum Alloy Camera Track Slider Video Stabilizer Rail with 4 Bearings for DSLR Camera DV Video Camcorder Film Photography, Loads up to 17.5 pounds/8 kilograms

Konova Slider K5 
Comes with one ball head

 Slider for professional camera use. Can be Tripod mounted. For smoother and elegant shots

 Ronford Baker 2ft (24”) slider. Moy fitting. Compatible with all Moy / Mitchell heads. 

3-day minimum hire required (not including pick up and return dates).
You get 3 full days with the kit and you get half-day before and after your booking to return the kit.


Example hire:

Pickup Sunday between 1pm-8pm
Hire and use Monday, Tuesday, Wednesday
Return Thursday 12pm (midday latest)

Unfortunately, after a series of disappointing 1 day hires, that return the kit late; in poor keeping and fail to communicate properly, I will only loan to reliable llamas who need the kit for more than one day.

Motorised slider and panning control with Rhino Arc.
Great for adding movement to interview footage and for time-lapses. AC power only. 
This slider isn't powered by batteries.

- Rhino Slider Pro 42” aluminium rails
- Rhino Arc
- Manfrotto tripod head (+plate) to mount to the Rhino Arc
- Manfrotto tripod and head for centrally mounting the slider for elevated shots.
- 2 x mono
 pods for supporting the ends of the rails to prevent the movement of the carriage bending the rails.

Watch the video:
https://www.youtube.com/watch?v=i82iIR1RxKU

How to use it:
https://www.youtube.com/watch?v=vcYaezoVCMQ&feature=youtu.be

Load Capacity: 22.7kg
Recommended Support: Manfrotto 546B or 132XNB
Tripod Mounting: Center and Ends

iFootage Shark S1 slider, extender rods and wheel plus 2 belts included.  Extends to 180cm.  

A nice long slider to elevate your DSLR videos to a whole new level.

Bagged for easy transport and setup is a sinch. Come with a ball head to allow you to experient with creative angles quickly and accurately. 

Comes with a manfrotto plate attached underneath in the centre so you can mount it on any compatible tripod.

Edelkrone Slider PLUS Long, Slide Module + Pan System & Tilt.

This system allows the user to simultaneously slide and pan a camera across 2 axis. This is all controlled by the very easy to use app.

The Slider can be rented in a package with an appropriate tripod to hold and counter-balance, please ask if interested.

HAVE NOT HAD TIME TO TAKE PHOTOS YET

*Also available with BALLOON TYRES (see separate listing)

A rickshaw allows the operator to get fast, smooth shots without the need or cost for a tracking vehicle. You're only limited by the speed of the person pulling you. Whether you're using a Steadicam, shooting handheld, or on a gimbal, this will help you stabilise fast shots and remove the fatigue normally experienced when trying to achieve these shots.

For Gimbal, handheld & Steadicam use
Lightweight compact design
Hard anodised for durability
Fast Tools Free setup
Jockey wheel for precision tracking
Two wheel fast mode
Extending axle for stability
Adjustable footrests
Camera accessory mount for mounting stabiliser systems
Quickly packs into one case

A complete automated Edelkrone Slider System

edelkrone SliderPLUS Long - 21"
edelkrone HeadONE Remotely Controlled Motorised Pan System
edelkrone Slide Module v2 for SliderPLUS
edelkrone FlexTILT Head 2

Perfect for adding movement to time-lapses or automating precise slides.


The lil-mule time lapse camera dolly is an intuitive, heavy duty camera dolly for creating arced or linear camera moves when shooting time lapse or video.  More flexible than a slider.

Have a look at http://www.lil-mule.com or https://ksr-video.imgix.net/projects/376052/video-191809-h264_high.mp4 to see what it can do.

Includes 3 different speed motors and speed adjustment but can also be used manually without the motor engaged.  Complete with magic arm and camera tripod mount.  Alternatively a tripod head can be mounted directly to the Lil-Mule or tripod extension bar.

Includes 2 12v batteries (regular and large) and battery charger. Batteries will be charged on collection.  The movement arc is adjusted with the centre front wheel.  Linear movement uses 4 wheels, one in each corner.

This dolly was built by a BBC grip - he built about 20 of them that were used around BBC productions since the 90's. I got it a while ago and fully kitted it out. It's now essentially the frame for a Matthews Doorway Dolly but at less than half the rental cost per day. I supply with it a bass for adding risers/bazookas if you want to. It's also supplied with Track Wheels so it can run along a standard or curved track. Also supplied with this is a steering handle, a push bar and a couple ratchet straps. There are also side extension panels to add some width if you want...plus for a more stable base if required the rear wheels can be extended out about 5/6 inches.

Amazing piece of pro kit. 

I am also a gimbal op, whenever I can I will combine this and a gimbal for amazing shots.

Can deliver for 45p per mile hmrc standard. Collection welcome as well. Free delivery on rental over a week plus.

We are currently working on creating a doorway dolly/gimbal hybrid rig - contact us if you're interested. Thanks

120cm Neewer Slider in great condition with an additional ball head mount that I purchased separately but works brilliantly!
Slider comes in its own carry case.

Manfrotto Camera slider 60cm with MVH500AH Video Head MVS10

XSOURCE slider 80cm, ball head and carry bag. Lightweight, ideal for DSLRs, BMPCC

Turns your tripod into a dolly. Takes light and heavy metal tripods.

PLEASE ASK FOR AVAILABILITY BEFORE BOOKING 

Kit includes:

• YC Slider
• Andoer Ball Head
• Carrying Box

The slider's full range of motion when mounted on a tripod is 30cm and it can hold up to 20kg. Very sturdy build, yet a super compact size. 


Dana Dolly Universal Rental Kit  in a custom made  Wheeled SKB Case with folding handle. Can take up to 45kg setups and multiple configurations, see the pictures.

INCLUDED IN BOX

1x Dolly
2x "Universal"-style Track Ends
1x 75mm Adapter
1x 100mm Adapter
1x 150mmAdapter
1x Center Support
1x Monitor Mount 
1x Custom SKB Case
1x brake 
2X 4ft or 6ft scaffold rail

Used For Theme Exhibition, Window Display, Product Display, Photograph Show, Cube Spin Display, Advertising. Provide Customer 360 degree view of your product and allow Photographer to take photos in 360° degree view. Improve the exhibition effect in showroom, superstore, trade show, etc.

QUIET & SMOOTH ROTATION - Constant, smooth rotations complete a full circle every 50 seconds. We dare you to try and find a Quieter Turntable. You can barely hear it! Which is nice should you ever decide to use it to display a product or cake at an event.

Rotating Speed: 50sec/Circle (Hold up to 25kg), ultra-low noise and low power consumption. Diameter:20CM, Powered by wall power 220V.

EASY TO USE - Just plug it in (220V cord included) and flip the switch! Single switch operation, continue to switch on and off until you get desired spin direction.

 Manual slider 40cm - location on Wandsworth High street. Any questions please don’t hesitate to get in touch. 

Custom slider listing

*48 Inch slider 
* ARC 1 
* carry case 


30 inch Duzi 4 Camera Slider from Cinevate.

- Supports up to 45kg loads
- Offers smooth and consistent slides for even lighter cameras thanks to the flywheel.
- Flywheel adds inertial dampening, providing a degree of resistance that allows for more control.
- Flywheel also brings about better stability and precision.
- Roller-bearing slider made of hardened aluminum and stainless steel, and featuring solid carbon fiber rails
- Micro adjusting urethane ball feet, including two for center-mounting
- Integrated bumpers on end blocks
- Integrated bubble level
- Eight precision roller bearings
- Center and side-mounting tripod options
- Lock easily secures the camera anywhere on the rails

Manfrotto 502 Video Head

- With flat base features variable fluid drag system for pan and tilt movements that's cleverly incorporated into the design.
- Maximum payload of 7kg
- Fixed counterbalance system of 4 Kg

New to Fat Llama? Create an account with my referral link for a £20 credit: https://fatllama.com/r/fras-d1ecd 

DISCLAIMER: I only rent to fellow professionals with a clear profile photo and portfolio website link which displays their contact information on it. On collection, I will take a picture of you and your ID before I release the equipment. Only the person on your profile can collect and return. I charge for the duration of your shoot i.e. if you need to rent for a Saturday and Sunday production, I would allow you to collect on Friday evening and return on Monday morning.

As a freelancer, my schedule can be unpredictable. Before booking, get in touch to make arrangements.

For users who have previously enquired a kit with me. 

BESPOKE LISTING FOR PROBE LENS SLIDER KIT:TOM001

*LAOWA PROBE 24MM LENS
*Ultra quiet slider 1000mm
*Tilta N with support rods




 Fixed axis dolly rig: for straight and level truck and dolly shots. Maximum payload 250kg. Can easily support rigged camera or operator with camera.  Tripod, gimbals available. Large Pneumatic wheels absorb vibrations on the surface where typical dolly wheels would transport distortion to the camera. Ideal for truck/ dolly shots on interior floors, roads and any hard flat surface. No tracks means you get a clear smooth dolly shot without the fuss and tedious set up. A fixed axis means no steering off course. Keeping the shots continuity. The side bars allow modifications for builds. Tow ropes and handle allow aid of crew to push or pull the truck for the shot. The system is also tested for durability and silent manoeuvre. 

 Arc 2 from rhino slider. With 24, 48 inch track. Padded bag, lots of extras available. 

 One Man Crew Director™ is a motorized slider with a unique parabolic curve that transforms your static shots with beautiful cinematic motion. Dramatically improve interviews, documentaries and any talking head videos, all without a dedicated operator.

Carry case, power supply and battery included.

Check here for specs.https://shop.redrockmicro.com/product/one-man-crew-director-2/

Glidecam HD 4000

Handheld Camera Stabilisation System for Cameras Weighing 1.8-4.5Kg (4-10lb)
comes with 10 weights in total . you can put 5 weights on each side depends on the size of your camera and lens and how many accessories on top. 

FREE BALANCE SETUP 

*****REMINDER HIRE***** 
- All items are subject to a 24HR rental time. From the time the item was arranged from pick. Any late returns will subject to an extra full day rental charge automatically unless arranged a suitable time with lender before hand. 

CUSTOM BUILT MOTORISED SLIDER FOR DSLR by CAMERATRAX HD.

** ENQUIRE BEFORE BOOKING**

After testing numerous sliders this FRANKENSTEIN is the best choice for the LAOWA PROBE LENS:

It may not have all the intelligent features other sliders have. However what it's sacrificed in tech and versatility it more than makes up for it in Quality. It's Incredibly quiet, almost silent. This means less moving parts, less vibration. Essential with a 40cm long macro lens. 

I have tested this Slider up against the Rhino EVO arc with a laser pointer, It is marginally smoother and considerably quieter.  

FEATURES:
*Variable speed 
(can be user defined with a very simple change to the code - full instructions included).

*Can be programmed for full 1m travel from 40 hours (hyper lapse) to 10 seconds (video).

*Aluminium rotary speed control.

*Fitted with micro switches for continual 'bounce' feature (continues until powered down).

*Totally silent stepper motor using a fitted TMC2208 driver.

*Total length of 110cm and a weight 3kg. 

*Track length 100cm

*Very smooth camera carriage with 3 bearing wheels.

*Fitted with variable drag feature (ideal for using as a manual slider).

*Adjustable tripod plate drilled and threaded for both 3/8 and 1/4 inch mounts.

*Supplied with 12v battery box with 2.1mm barrel connector. 12v AC/DC UK power supply. 

*Comes in padded bag. with camera mounting Z plate. 

*EXTRAS
*CARBON UNDER TRACK
*STANDS
*ATOMOS SHINOBI 4K MONITOR
*150WH BATTERY AND SPLITTER 5,7,12,14V PORTS, USB
*POWERFUL VIDEO LIGHTS

PLEASE ENQUIRE FOR MORE INFORMATION ON THESE EXTRAS.THEY HAVE INDEPENDANT LINKS.

**PLEASE ENQUIRE AVAILABILITY BEFORE BOOKING**
Cancellations affect my lender status. This item may be booked out with other kit, and I'm not always able to mark it in my calendar
.
Neewer 120cm carbon fibre slider, track for video. 

*manual slider (not motorised) 
*light weight 
* smooth track 
* custom weighted pully system for a remarkably smooth glide. 
*heavy duty stands available

More pics and info coming soon 

The Sachtler spider dolly allows you to quickly and easily add movement to your shots. 

Original Wally Dolly - the best portable dolly out there. 
Wally Dolly T Section
9ft (3m) Track/pad 
2 End Stops
Cleaning Cloth
Kit Bag
Works with most tripods, or happy to lend you compatible Miller 1514 DS20 carbon tripod.  

PLEASE ENQUIRE BEFORE BOOKING!

*24" motorised carbon slider £15
*24"+ 48" motorised sliders £25
*Add arc motor £10
*Add manfrotto MVH500AH fluid head for £5

FIND A BETTER PRICE? ILL MATCH IT!

Multi day discount available, No minimum days hire!

IN THE BAG:
*24" carbon slider
*48" Steel slider
*Rhino ARC motor with Z axis baseplate for tilt of camera.
***Sliders come with Control, motor, cable, charger.
*** Arc comes with usb charge lead, Sync cable to remote
* All come in padded carry cases

Designed for professional film makers and able to carry up to 22.7kg of weight, the versatile Rhino Motorized Studio Slider Bundle consists of the Rhino Slider EVO PRO 42", the Rhino Motion, 24" Carbon Rails, the ARC moduleand and a 42" Carrying Case. The interchangeable rail design allows users to swap the 42” steel rails with the 24” carbon rails to create a lightweight setup that can be transported easily. See other listings for cameras and lenses. 

20inch Proaim manual slider. Comes with a carry case. Perfect condition. 

••• Please send me a message before booking to check availability, many thanks •••

Kessler Philip Bloom Pocket Dolly Mini (1m) complete with carry case and MVH502AH fluid head.

Also available to hire the following camera, lenses and accessories:

Nikon D800 FX Full Frame DSLR complete with accessories.

Sigma 50mm f/1.4 lens
Tamron 24-70mm f/2.8 VC USD lens
Sigma 70-200mm f/2.8 APO EX DG  lens

Nikon SB900 Speedlight

Manfrotto 535K Carbon Fiber Tripod with Manfrotto 504HD Fluid Video Head
Kessler Philip Bloom Pocket Dolly Mini with Manfrotto MVH502AH Video Head
Glide Gear DNA 5050 Professional Camera Stabiliser with Manfrotto 577 QR plate

Zoom H4n Audio Recorder
Atomos Ninja 2 (Hard disk based touch screen field recorder and monitor)
Røde PG2 Pistol Grip and Shockmount
Røde NTSM3 Camera Top Hot Shoe Shockmount
Røde 3m Boom Pole

The Libec TR-320 track & dolly.

Customisable from 1 to 6 metres in length. Can be carried and assembled by one single person, just screw together the aluminium poles, attach a tripod onto the dolly and you're away. Tripod available to hire too if required.


- A package which includes other items, such as high end 4K Cinema Cameras, DSLRs, lenses, lots of lighting equipment, car mounts, grip gear, dolly, Steadicam, sound gear, monitors, etc, is also available, with or without an operator, and I'm happy to customise favourably to suit your needs.

Thanks!
Ed


Spider Stablizer

Description

Location

Item lent by Jodie

Other items from Jodie

FAQs

Spider Stablizer

Explore other options around Twickenham