THE TRACK/RAIL The Camslide Easyglide 1000 has a 1000mm rail. Should you require a longer length the optional Rail Connector enables the track to be joined together. The track is 80mm wide with both 1/4" and 3/8" mounting holes in the centre and also at each end of the 1000mm rail, this enables the track to be mounted on the head of a tripod or directly onto the legs of the tripod. For extra stability the 1000mm track can be mounted across two tripods using the mounting holes at each end of the track. Two Rail Supports are also supplied, one for each end of the track, which support the Camslide track when it is used on a table or the floor and also prevents the carriage from coming off the end of the track. THE CARRIAGE The Carriage is 105mm wide and 100mm long, it is this extra width that gives the carriage much more stability and smoother movement than other sliders on the market. The 4 low friction bearings on this carriage are not "bolted on", they are incorporated within the carriage, this prevents any miss alignment or any accidental knocks that can easily send external bearings out of alignment making the carriage stiff to move. We have also decided not to incorporate Hybrid Roller Bearings into the carriage as they are prone to picking up dirt and grit off the track, preventing smooth movement if the track it is not kept clean. The carriage has a 1/4" screw in the centre to mount the camera to the carriage, also supplied is a stepping collar to convert the camera screw to 3/8" should you wish to mount a head that has a 3/8" threaded mounting hole.
Fat Llama covers damages up to £25,000 per item
In case of cancellation 2 days before the rental period, 100% of the rental amount is refunded. If canceled one day before the rental period, 50% of the rental amount is refunded. If you cancel the same day the rental period starts, no refund is made.