Custom Car Mount Rig, Heavy Duty. Tilta Hydra Alien,
Owned by RIDGE R
within a few minutes
100% response rate
Wandle 6206.4 km
Fat Llama covers damages up to £25,000 per item
Information
==================== CAR MOUNT:🚙🚗🚙🚗 ==================== ℹ️Safety Straps included TILTA HYDRA ALIEN⭐️⭐️⭐️⭐️⭐️ 1 x Tilta Hydra Alien Car Mounting System (£75) 1 x Tilta Hydra Alien 75mm Ball Head Riser (H 100mm) (£10) 1x MANFROTTO 75mm Fluid head (£10) ℹ️ For a Static Rig, I.e filming talent in vehicle, Can also be used as a tripod fixed to Roof of Vehicle 1 x Tilta Soft Spring Baseplate mount (£10) (Improved version 2023) ℹ️ ADDS ADDITIONAL STABILITY FOR THE HYDRA CAR RIG 1 x Damperzen Underslung Shock Absorber (£25) ℹ️ ADDS ADDITIONAL MAXIMUM STABILITY FOR THE HYDRA CAR RIG HAGUE / MANFROTTO CAR RIG ⭐️⭐️⭐️⭐️⭐️ 1 x Hague Suction Car Mount Kit (£35) 3x MANFROTTO Suction Cups, * 5/8 Rods 2x 100cm, 3x50cm 1x 25cm coupler 1x Baby pin elbow 1/4” camera mount ————————— 6 x MANFROTTO SUCTION CUPS (£5) 2 x MANFROTTO LEVER MAGIC ARMS (£5) 3x 16mm / ball head Camera Mount £5 ℹ️ Single pad to mount Camera ACTION CAMERA CAR MOUNT ⭐️⭐️⭐️⭐️⭐️ 2x PRO PGYTECH 3x suction cup mount £5 ℹ️ Small units for action cameras. I.e GoPro / insta360 1 x TILTA / INSTA360 INVISIBLE CAR RIG ℹ️ Strong, lightweight kit of 3 x Suction Cups and selfie stick holster. GTA / POV perspective. 9.SOLUTIONS RIG⭐️⭐️⭐️⭐️⭐️ (Priced per unit) HEAVY DUTY RIG 1x Multi-Purpose Cheese Plate * With the possibility to build construction out of the lateral threaded blocks * 3 Blocks positioned at the corners, each with lateral and lower 3/8"-16 threaded holes * Elongated centre slot (10 x 36 mm) allows accurate positioning of ball heads * 10 mm through holes and 4 1/4"-20 tapped holes with industry standard 1" centre distance * Connection options: top plate, 10 x 36 mm slotted hole, 12x 3/8" (10 mm) through holes (each 10 mm hole in top plate is spaced 1" apart), 10x 1/4"-20 threaded holes, 3x corner blocks, 3x 3/8"-16 threaded side holes, 3/8"-16 threaded bottom hole * Weight: 4480 g * Incl. 3x 3/8"-16 rod clamps (can be positioned in any 3/8"-thread) £10 CAMERA ACCESSORIES AVAILABLE * FLUID HEADS * Z AXIT HEADS * BALL HEADS * L / VERTICAL BRACKETS * DJI RS GIMBAL MOUNT 5/8 (16mm) RODS Anodised Aluminium Threaded Rods Female Thread 3/8” / Connector per pair 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £5 6x Pair 3.5 inch Baby Pin Set * Short threaded rods to extend the flexible mounting possibilities of 9.solutions clamps * Set contains 2x baby pins, 1x 3/8" male thread and 1x 3/8" female thread per rod * Material: Hard anodised aluminium * Length: 8.89 cm * Weight per rod: 55g * Pair well with suction cups £2 8x 9.solutions Suction Cup * Allows a variety of recording options * Mounting: 9x 3/8" Threaded bushing, * 10x 1/4" threaded bushing, * 2x 3/8" bar clamp * Weight: 365 g * Pair well with 3.5 baby pin £5 GAGS / ROD CONNECTORS 6x 5/8" Dual Knob Gag Flexible connector for 5/8" Rods and 3/8" Rods * Opening on both sides for 3/8" (10 mm) and 5/8" (16 mm) rods * Can be opened and tightened independently * Easy handling due to large wing screws * Weight: 340 g £2 6x 5/8” Gag Open Connector for 2x 5/8" rods * For easy positioning at any angle * 2x Opening for 5/8" (16 mm) rod * Weight: 160g £2 4x 5/8"+ 3/8" Gag Closed Connector for 3/8" and 5/8" rods * For easy positioning at any angle * 2x Hole for 5/8" (16 mm) Rod and 1x hole for 3/8" (10 mm) Rod * Weight: 165g £2 4x 3/8" Gag Connector for 2x 3/8" rods * Mounting types: 2x 3/8" (10 mm) clamp * Weight: 61g £2 CLAMPS 4x Savior Clamp With Stud Universal Retaining Clip with 16 mm Pin * Special jaws that grip firmly on any irregular profile * Can be mounted to round, square or flat profiles * For pin size: 0 - 60 mm * Max. load capacity: 30 kg * Mounting types: 2 x 1/4"-20 threaded hole, 2 x 3/8"-16 threaded hole, 1 x 5/8" pin with 3/8" end * Weight: 455g £5 2x Python clamp mini * Mounting sizes: 8 - 35 mm tubes * Max. load bearing capacity: 5kg * Weight: 137g * 1x 5/8" (16 mm) pass-thru receptacle * 1x 3/8" (10 mm) pass-thru receptacle £2 4x Grip Joint * Join 10 mm to 16 mm * Max. Load capacity: 5 kg * Weight: 95g * 1x 5/8" (16 mm) pass-thru receptacle * 1 x 3/8" (10 mm) pass-thru receptacle * 1 x 1/4" - 20 female thread * 3 x 3/8" - 16 female thread £2 2x Snap-in socket * Max. Load capacity: 20kg * 1x 3/8"-16 threaded bush * 3/8" Pin take-up * 5/8" (16 mm) bolt £2 Double joint arms * Ball joints on both ends * The locking is via a point clamping mechanism * Each ball joint has a 5/8 "bolt with a 3/8" -16 female thread * Easy locking of lamps, cameras, monitors and a variety of devices at any angle * Fittings: 2x 5/8 "spigot with 3/8" -16 threaded bush TINY * Tiny version with 260mm * Max. Carrying capacity: 18kg * Weight: 510g £2 SHORT * Short version with 360 mm * Max. Carrying capacity: 14kg * Weight: 680g £5 MEDIUM * Medium version with 460mm * Max. Load capacity: 9kg * Weight: 810g £5 LONG * Weight: 680g * Max. Carrying capacity: 5kg * Weight: 1050g £5 LIGHT WEIGHT RIG (GOPRO / 360 cam) 3/8 (10mm) RODS Anodised Aluminium Threaded Rods Male Thread 3/8” 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £2 3/8" Finger & connecting nut * Contains 12x 3/8" threaded nuts and 6x 3/8" connecting nuts 29 mm * Suitable for 9.solutions 3/8" rod set GOPRO QM Angle Joint Quick Mount Angle Joint * 1x GOPRO Quick mount * 1x 3/8’ Quick mount receiver * Weight: 52 g £2 9.solutions Quick mount for GoPro Camera * Allows the attachment of the standard action cameras to the large range of 9.Solutions mounting materials * For a fast, flexible and secure attachment * Weight: 55 g £2 9.solutions 3/8"-16 Thread-on QM Receiver 3/8"-16 Screw Attachment * Mounting options: 1 x Quick Mount Receiver, 1 x 3/8"-16 threaded bush * Weight: 14g £2
Guarantee
Fat Llama covers damages up to £25,000 per item
Cancellation Terms
In case of cancellation 2 days before the rental period, 100% of the rental amount is refunded. If canceled one day before the rental period, 50% of the rental amount is refunded. If you cancel the same day the rental period starts, no refund is made.