Heavy duty car rig, suction pads, custom
Owned by Katana London Ltd.
within a few minutes
100% response rate
Wandle 6206.4 km
Fat Llama covers damages up to £25,000 per item
Information
SEE HOME PAGE FOR FULL KIT LIST 9.SOLUTIONS RIG⭐️⭐️⭐️⭐️⭐️ (Priced per unit) HEAVY DUTY RIG 1x Multi-Purpose Cheese Plate * With the possibility to build construction out of the lateral threaded blocks * 3 Blocks positioned at the corners, each with lateral and lower 3/8"-16 threaded holes * Elongated centre slot (10 x 36 mm) allows accurate positioning of ball heads * 10 mm through holes and 4 1/4"-20 tapped holes with industry standard 1" centre distance * Connection options: top plate, 10 x 36 mm slotted hole, 12x 3/8" (10 mm) through holes (each 10 mm hole in top plate is spaced 1" apart), 10x 1/4"-20 threaded holes, 3x corner blocks, 3x 3/8"-16 threaded side holes, 3/8"-16 threaded bottom hole * Weight: 4480 g * Incl. 3x 3/8"-16 rod clamps (can be positioned in any 3/8"-thread) £10 CAMERA ACCESSORIES AVAILABLE * FLUID HEADS * Z AXIT HEADS * BALL HEADS * L / VERTICAL BRACKETS * DJI RS GIMBAL MOUNT 5/8 (16mm) RODS Anodised Aluminium Threaded Rods Female Thread 3/8” / Connector per pair 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £5 6x Pair 3.5 inch Baby Pin Set * Short threaded rods to extend the flexible mounting possibilities of 9.solutions clamps * Set contains 2x baby pins, 1x 3/8" male thread and 1x 3/8" female thread per rod * Material: Hard anodised aluminium * Length: 8.89 cm * Weight per rod: 55g * Pair well with suction cups £2 8x 9.solutions Suction Cup * Allows a variety of recording options * Mounting: 9x 3/8" Threaded bushing, * 10x 1/4" threaded bushing, * 2x 3/8" bar clamp * Weight: 365 g * Pair well with 3.5 baby pin £5 GAGS / ROD CONNECTORS 6x 5/8" Dual Knob Gag Flexible connector for 5/8" Rods and 3/8" Rods * Opening on both sides for 3/8" (10 mm) and 5/8" (16 mm) rods * Can be opened and tightened independently * Easy handling due to large wing screws * Weight: 340 g £2 6x 5/8” Gag Open Connector for 2x 5/8" rods * For easy positioning at any angle * 2x Opening for 5/8" (16 mm) rod * Weight: 160g £2 4x 5/8"+ 3/8" Gag Closed Connector for 3/8" and 5/8" rods * For easy positioning at any angle * 2x Hole for 5/8" (16 mm) Rod and 1x hole for 3/8" (10 mm) Rod * Weight: 165g £2 4x 3/8" Gag Connector for 2x 3/8" rods * Mounting types: 2x 3/8" (10 mm) clamp * Weight: 61g £2 CLAMPS 4x Savior Clamp With Stud Universal Retaining Clip with 16 mm Pin * Special jaws that grip firmly on any irregular profile * Can be mounted to round, square or flat profiles * For pin size: 0 - 60 mm * Max. load capacity: 30 kg * Mounting types: 2 x 1/4"-20 threaded hole, 2 x 3/8"-16 threaded hole, 1 x 5/8" pin with 3/8" end * Weight: 455g £5 2x Python clamp mini * Mounting sizes: 8 - 35 mm tubes * Max. load bearing capacity: 5kg * Weight: 137g * 1x 5/8" (16 mm) pass-thru receptacle * 1x 3/8" (10 mm) pass-thru receptacle £2 4x Grip Joint * Join 10 mm to 16 mm * Max. Load capacity: 5 kg * Weight: 95g * 1x 5/8" (16 mm) pass-thru receptacle * 1 x 3/8" (10 mm) pass-thru receptacle * 1 x 1/4" - 20 female thread * 3 x 3/8" - 16 female thread £2 2x Snap-in socket * Max. Load capacity: 20kg * 1x 3/8"-16 threaded bush * 3/8" Pin take-up * 5/8" (16 mm) bolt £2 Double joint arms * Ball joints on both ends * The locking is via a point clamping mechanism * Each ball joint has a 5/8 "bolt with a 3/8" -16 female thread * Easy locking of lamps, cameras, monitors and a variety of devices at any angle * Fittings: 2x 5/8 "spigot with 3/8" -16 threaded bush TINY * Tiny version with 260mm * Max. Carrying capacity: 18kg * Weight: 510g £2 SHORT * Short version with 360 mm * Max. Carrying capacity: 14kg * Weight: 680g £5 MEDIUM * Medium version with 460mm * Max. Load capacity: 9kg * Weight: 810g £5 LONG * Weight: 680g * Max. Carrying capacity: 5kg * Weight: 1050g £5 LIGHT WEIGHT RIG (GOPRO / 360 cam) 3/8 (10mm) RODS Anodised Aluminium Threaded Rods Male Thread 3/8” 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £2 3/8" Finger & connecting nut * Contains 12x 3/8" threaded nuts and 6x 3/8" connecting nuts 29 mm * Suitable for 9.solutions 3/8" rod set GOPRO QM Angle Joint Quick Mount Angle Joint * 1x GOPRO Quick mount * 1x 3/8’ Quick mount receiver * Weight: 52 g £2 9.solutions Quick mount for GoPro Camera * Allows the attachment of the standard action cameras to the large range of 9.Solutions mounting materials * For a fast, flexible and secure attachment * Weight: 55 g £2 9.solutions 3/8"-16 Thread-on QM Receiver 3/8"-16 Screw Attachment * Mounting options: 1 x Quick Mount Receiver, 1 x 3/8"-16 threaded bush * Weight: 14g £2 ------------------------------------------------------------------- TILTA HYDRA ALIEN CAR KIT ALSO AVAILABLE Hague/ MANFROTTO, Heavy duty, extension version of the car mount kit. Side mounted- Max 10kg load. Tripod mounted Max 100kg load 3x heavy duty suction pads 1x 5/8” ball joint base plate to 1/4” thread. (3x available) Connecting rods: 2x 100cm, 3x 50cm 1x 25cm, 1x joining bracket. 2x joining knuckles. £30 Or Build your own 6 x Heavy duty suction pad £5 6 x Camera Mount 5/8” ball joint base plate to 1/4” thread. £5 6 x MANFROTTO LEVER MAGIC ARMS £5 10 x SUPER CLAMPS 10 x GRIP HEADS (IDEAL FOR INTERNAL CAR SHOTS) Blue protective shoe must be used at all times in travel. Please use the metal clamp to protect the blue pump in transit. (See first picture) ==================== CAR MOUNT:🚙🚗🚙🚗 ==================== ℹ️Safety Straps included 1 x Tilta Hydra Alien Car Mounting System (£75) 1 x Tilta Hydra Alien 75mm Ball Head Riser (H 100mm) (£10) 1x MANFROTTO 75mm Fluid head (£10) ℹ️ For a Static Rig, I.e filming talent in vehicle, Can also be used as a tripod fixed to Roof of Vehicle 1 x Tilta Soft Spring Baseplate mount (£10) (Improved version 2023) ℹ️ ADDS ADDITIONAL STABILITY FOR THE HYDRA CAR RIG 1 x Damperzen Underslung Shock Absorber (£25) ℹ️ ADDS ADDITIONAL MAXIMUM STABILITY FOR THE HYDRA CAR RIG 1 x Hague Suction Car Mount Kit (£35) ℹ️ 3x MANFROTTO Suction Cups, 5/8 Rods and camera mount 6 x MANFROTTO SUCTION CUPS (£5) 2 x MANFROTTO LEVER MAGIC ARMS (£5) 3x 16mm / ball head Camera Mount £5 ℹ️ Single pad to mount Camera 2x PRO PGYTECH 3x suction cup mount £5 ℹ️ Small units for action cameras. I.e GoPro / 360 1 x TILTA / INSTA360 INVISIBLE CAR RIG ℹ️ Strong, lightweight kit of 3 x Suction Cups and selfie stick holster. GTA / POV perspective.
Guarantee
Fat Llama covers damages up to £25,000 per item
Cancellation Terms
In case of cancellation 2 days before the rental period, 100% of the rental amount is refunded. If canceled one day before the rental period, 50% of the rental amount is refunded. If you cancel the same day the rental period starts, no refund is made.